本文主要利用微多孔表面熱傳增強技術在吸附式空調系統內之蒸發/冷凝器上，並測試其性能及分析。加熱表面的成核孔洞量越多，會有較高的氣泡密度，使其熱傳性能可以增加。
工作流體為水，而甲醇為冷媒，實驗平滑板與微多孔板其熱傳性能。
我們能利用其微多孔表面熱傳增強特性，設計固體吸附式空調系統內之蒸發/冷凝器，使其體積能有效的大幅縮小。

The main purpose of this research is to use micro-porous heat transfer enhancement technology on evaporators/condensers in the absorption air conditioning system. More nuclear ,higher . And the heat transfer performance can be better. The working fluid is water, and the refrigerator is methanol. Teat the heat transfer performance of plain plate and micro-porous surface. Use micro-porous technology to design evaporators/condensers in adsorption air conditioning system and make the total volume of the heat exchanger smaller.

Barthau, G., 1992, “Active nucleation site density and pool boiling heat transfer,” International Journal of Heat and Mass Transfer, Vol. 35, No. 2, pp. 271-278.
Chang, J. Y. and You, S. M., 1996, “Heater Orientation Effects on Pool Boiling of Microporous-Enhanced Surfaces in Saturated FC-72,” ASME J. Heat Transfer, Vol. 118, No. 4, pp. 937–943.
Chang, J. Y. and You, S. M., 1997, “Boiling Heat Transfer Phenomena From Microporous and Porous Surfaces in Saturated FC-72,” Int. J. Heat Mass Transfer. Vol. 40, No. 18, pp. 4437-4447.
Chang, J.Y., and You, S.M., 1997, “Enhanced boiling heat transfer from micro-porous surfaces: effects of a coating composition and method,” Int. J. Heat Mass Transfer. Vol. 40, No. 18, pp. 4449–4460.
Chang, W. S., Wang, C. C., and Shieh, C. C., 2007, “Experimental study of a solid adsorption cooling system using flat?tube heat exchangers as adsorption bed”, Applied Thermal Engineering, Vol. 27, pp. 2195?2199.
Cieslinski, J. T., 2002, “Nucleate pool boiling in porous metallic coatings,” Experiment Thermal and Fluid Science, Vol. 25, pp. 557-564.
Collier, J. G., and Thome, J. R., 1994, Convective Boiling and Condensation, Third Edition. Oxford University Press New York. Chapter 4, pp. 148-151.
Cooper, M.G., 1984, “Saturation nuclear pool boiling – a simple correlation,” International Chemical Engineering Symposium Series, Vol. 86, pp. 785-792.
Dizon, M. B., Yang, J., Cheung, F. B., Rempe, J. L., Suh, K. Y. and Kim, S. B., 2004, “Effects of Surface Coating on the Critical Heat Flux for Pool Boiling from a Downward Facing Surface,” Journal of Enhanced Heat Transfer, Vol. 11, pp. 133-150.
Fan, C.-F. and Yang, C.-Y., 2006, “Pool Boiling of Refrigerants R-134a and R-404A on Porous and Structured Tubes – Part I, Visualization of Bubble Dynamics,” Journal of Enhanced Heat Transfer, Vol. 13 pp. 85-97.
Hsieh, S. S., and Weng, C. J., 1997, “Nucleate Pool Boiling From Coated Surfaces In Saturated R-134a And R-407c” Int. J. Heat and Mass Transfer, Vol. 40, No. 3, pp. 519-532.
Hwang, G. S., and Kaviany, M., 2005, “Critical heat flux in thin, uniform particle coatings” Int. J. Heat and Mass Transfer, Vol. 49,pp.844-849.
Nakayama, W., Daikoku, T., and Nakajima, T., 1982, “Effects of pore diameters and system pressure on saturated pool nucleate boiling heat transfer from porous surfaces,” Journal of Heat Transfer, Vol. 104, pp. 286-291.
O’Connor, J. P., and You, S. M., 1995 “A Painting Technique to Enhance Pool Boiling Heat Transfer in FC-72,” ASME J. Heat Transfer, Vol. 117, No. 2, pp. 387-393.
Stephan, K., and Abdelsalam, M., 1980, “Heat-transfer correlations for natural convection boiling,” Int. J. Heat and Mass Transfer, Vol. 23, pp. 73-87.
Webb, R. L., “Principles of Enhanced Heat Transfer” 2th, Taylor & Francis, New York, 2005.
Yang, C.-Y. and Fan, C.-F., 2006, “Pool Boiling of Refrigerants R-134a and R-404A on Porous and Structured Surface Tubes – Part II, Heat Transfer Performance,” Journal of Enhanced Heat Transfer, Vol. 13, pp. 65-84.
Yang, J. and Cheung, F. B., 2005, “A Hydrodynamic CHF Model for Downward Facing Boiling on a Coated Vessel,” Int. J. Heat and Fluid Flow, Vol. 26, pp. 474-484.
謝鎮州、張文師、王智正、唐震宸，2004，”運用工業廢熱之固體吸附式製冷系統”，化工技術第133期，pp. 149?164
鄭喬鴻,2005，” 微鰭管應用於吸附空調系統蒸發/冷凝器之性能實驗探討”