跳到主要內容

簡易檢索 / 詳目顯示

回結果列表
研究生： 黃治平
Zhe-Pin Huang
論文名稱： 非晶質氮化矽氫基薄膜發光二極體與有機發光二極體的光電特性
指導教授： 洪志旺
Jyh-Wong Hong
口試委員:
學位類別： 碩士
Master
系所名稱： 資訊電機學院 - 電機工程學系
Department of Electrical Engineering
畢業學年度： 88
語文別： 中文
論文頁數： 70
中文關鍵詞： 薄膜發光二極體 、有激發光二極體 、非晶質薄膜
相關次數： 點閱：5  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報


    • 本研究的另一主題是結合非晶質薄膜與有機聚合物發光材料研製有機發光二極體(OLED)。元件結構係以P-型非晶質膜取代傳統的聚合物電洞注入層，並以N-型非晶質膜作為電子注入層。僅含P-型非晶矽層的OLED，其臨限電壓為6.21 V，而當電流密度為 600 mA/cm2時，發光亮度可達1383 cd/m2。再沈積N-型非晶矽後的元件，其臨限電壓為8.84 V，發光亮度則降至203 cd/m2。

    Contents Abstract Ⅲ Table Captions ???? Ⅳ Figure Captions Ⅴ Chapter 1 Introduction 1 Chapter 2 A-SiN:H-Based TFLED 2.1 Preparations of Various Thin Films 4 2.1.1 Deposition System 4 2.1.2 Film Deposition 4 2.2 Device Synopsis 10 2.3 Device Fabrications 10 2.4 Measurement Techniques 16 2.4.1 Optical Bandgaps of Amorphous films 16 2.4.2 EL Intensity and Brightness 16 2.4.3 EL Spectrum 16 2.5 Results and Discussions 19 2.5.1 Fundamental Considerations 19 2.5.2 Current-Conduction Mechanism 19 2.5.3 J-V and B-V Characteristics 21 2.5.4 EL Spectra 25 Chapter 3 Organic LEDs 3.1 Fundamentals of OLED 31 3.2 Device Fabrications 34 3.3 Results and Discussions 34 3.3.1 The p-a-Si:H and p-SiC:H films 34 3.3.2 The n-a-Si:H layer 42 3.3.3 EL Spectra 42 Chapter 4 Conclusions 50 References 52

    References
    [1] W. E. Spear and P. G. LeComber, “Substitutional Doping of Amorphous Silicon,” Solid State Commun. 17, pp.1193, 1975
    [2] D. E. Carlson and C. R. Wronski, Appl. Phys. Lett. 28, pp.671, 1976
    [3] N.F. Mott and E. A. Davis, “ Electronic Processes in Non-Crystalline Materials,” 2nd ed., Chap. 6, Oxford University Press, pp. 288, 1979.
    [4] J.I. Pankove and D.E. Carlson, “ Electroluminescence in Amorphous Silicon, ” Appl. Phys. Lett., Vol.29, pp.620, 1976.
    [5] T.S. Nashashibi, I.G. Austin, T.M. Searle, and R.A. Gibson et al., Phil. Mag., Vol. B45, pp.553, 1982.
    [6] A.J. Rhodes, P.K. Bhat, I.G. Austin, T.M. Searle, and R.A. Gibson, J. Non-Cryst. Solids., Vol.59 and 60, pp.365, 1983.
    [7] D. Kruangam, T. Endo, W. Guang-Pu, H. Okaamoto, and Y. Hamakawa, “ Visible-Light Injection-Electroluminescent a-SiC:H p-i-n Diode,” Jpn. J. Appl. Phys., Vol. 24, No. 10, pp. L806-L808, 1985.
    [8] D. Kruangam, T. Endo, M. Deguchi, W. Guang-Pu, H. Okamoto, and Y. Hamakawa “ Amorphous Silicon-Carbide Thin-Film Light Emitting Diode,” Optoelectronics Devices and Technologies, Vol. 1, No. 1, pp. 67-84, 1986.
    [9] D. Kruangam, M. Deguchi, T. Toyama, H. Okamoto, and Y. Hamakawa, “ Carrier Injection Mechanism in a-SiC:H p-i-n Junction Thin-Film LED,” IEEE Trans. Electron Devices, Vol. 35, No. 7, pp.957, 1988.
    [10] S.M. Paasche, T. Toyama, H. Okamoto, and Y. Hamakawa, “Amorphous- SiC Thin Film p-i-n Light-Emitting Diode Using Amorphous-SiN Hot- Carrier Tunneling Injection Layers,” IEEE Trans. Electron Devices, Vol. 36, No.12, pp. 2895, 1989.
    [11] T.C. Chung, “Optoelectronical Characteristics of Green-Blue-White a- SiN:H-based p-i-n Thin-Film Light-Emitting Diodes,” M.S. Thesis, NCU, Taiwan, R.O.C., 1998.
    [12] M.L. Hsu, “Thin-Film LED and Thin-Film Transistor Fabricated by Using a PECVD System with a Mesh,” M.S. Thesis, NCU, Taiwan, R.O.C., 1999.
    [13] Arno Kraft, Andrew C. Grimsdale, and Andrew B. Holmes, “Electroluminescent Conjugated Polymers─Seeing Polymers in a New Light,” Angew. Chem. Int. Ed. 1998, 37, pp 402-428.
    [14] J.H. Burroughes, D.D.C. Bradley, A.R. Brown, R.N. Marks, K. MacKay, R.H. Friend, P.L. Burn, and A.B. Holmes, “Light-Emitting Diodes Based on Conjugated Polymers,” Nature, 1990, 347, pp 539-541.
    [15] C.Z. Wu, “Organic Thin-Film Light-Emitting Diodes─Techniques and Application in Flat-Display,” Electronics Information, 1996, vol.4, no.2, pp 4-12.
    [16] C.C. Wu, S.D. Thesis, G. Gu, M.H. Lu, J.C. Sturm, S. Wagner, and S.R. Forrest, “Integration of Organic LED’s and Amorphous Si TFT’s onto Flexible and Lightweight Metal Foil Substrates,” Electron Device Letters, 1997, vol.18, no.12, pp 609-612.
    [17] J.C. Wang, “ Improving the Characteristics of Amorphous Metal- Semiconductor-Metal Photodetectors (MSM-PDs),” M.S. Thesis, NCU, Taiwan, R.O.C., 1996.
    [18] J. Y. Chen, “ The Effect of Graded-Gap and Barrier Layer Structure on the Electroluminescence Properties of a-SiC:H p-i-n Thin-Film Light Emitting Diode,” M.S. Thesis, NCU, Taiwan, R.O.C., 1992.
    [19] J. K. Chen, “ Characteristics of a-SiC:H Double Composition-Dopant- Graded Gap p-i-n Thin-Film Light-Emitting Diodes,” M.S. Thesis, NCU, Taiwan, R.O.C., 1995.
    [20] Wirote Boonkosuum, Dusit Kruangam, and Somsak Panykeow, “Visible- Light Amorphous Silicon-Nitride Thin-Film Light Emitting Diode,” Mat. Res. Coc. Symp. Proc. Vol.297, pp. 1005-1010.
    [21] H. Iida, N. Shiba, T. Mishuku, and H. Karasaw, “Relationship between Average Grain Size on Surface of SnO2 Transparent Conductive Film and Conversion Efficiency of Amorphous Si:H Solar Cell,” IEEE Electron Device Lett., Vol. 4, pp. 157-159, 1983.
    [22] Yen-Ann Chen, Chen-Fu Chiou, Wen-Chin Tsay, Li-Hong Laih, Jyh-Wong Hong, and Chun-Yen Chang ” Optoelectronic Characteristics of a-SiC:H- Based P-I-N Thin-Film Light-Emitting Diodes with Low-Resistance and High-Reflectance N+-a-SiCGe:H Layer,” IEEE Trans. on Electronic Devices, Vol.44, No.9, pp.1360-1366 , 1997
    [23] M. S. Haque, H. A. Naseem, W. D. Brown, and S. S. Ang, “ Hydrogenated Amorphous Silicon/Aluminum Interaction at Low Temperatures, “ Mat. Res. Soc. Symp. Proc., Vol. 258, pp. 1037-1042, 1992.
    [24] J. Tanc, Amorphous and Liquid Semiconductors, chap. 5, Plenum Press, pp. 175, 1974.
    [25] M.A. Lampert and P. Mark, “Current Injection in Solids,” Academic Press, 1970.
    [26] D. Kruangam, M. Deguchi, T. Toyama, H. Okamoto, and Y. Hamakawa,” Carrier Injection Mechanism in a-SiC:H p-i-n Junction Thin-Film LED,” IEEE Trans. Electron Devices, Vol. 35, No. 7, pp. 957, 1988.
    [27] Y. Yang, and A.J. Hegger, “Carrier Injection into Semiconducting polymers: Fowler-Nordheim Field-Emission Tunneling,” Appl. Phys. Lett., 64, 1994, pp.1245.
    [28] S. Karg, J.C. Scott, J.R. Salem, and M. Angelopoulos, “Increased Brightness and Lifetime of Polymer Light-Emitting Diodes with Polyaniline Anodes,” Synthetic Metals, 80, 1996, pp.111-117.
    [29] D. Kruangam, T. Toyama, Y. Hattori, M. Deguchi, H. Okamoto and Y. Hamakawa, “ Improvement of Carrier Injection Efficiency in a-SiC:H p-i-n LED Using Highly-Conductive Wide-gap p, n type a-SiC Prepared by ECR CVD,” J. Non-Cryst. Solids, Vols. 97?, pp. 293-296, 1987.

    QR CODE
    :::