簡易檢索 / 詳目顯示
| 研究生： |
游子威 Zi-Wei You |
|---|---|
| 論文名稱： |
以B-rep為基礎之混接曲面辨識技術發展 |
| 指導教授： |
賴景義
Jiing-Yih Lai |
| 口試委員: | |
| 學位類別： |
碩士 Master |
| 系所名稱： |
工學院 - 機械工程學系 Department of Mechanical Engineering |
| 論文出版年： | 2014 |
| 畢業學年度： | 102 |
| 語文別： | 中文 |
| 論文頁數： | 67 |
| 中文關鍵詞： | 特徵辨識 、混接面 、圓角 |
| 外文關鍵詞： | feature recognition, blend face, fillet |
| 相關次數： | 點閱：9 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
混接面(又稱圓角面)特徵為CAD(Computer-Aided Design)模型中常見特徵之一，雖然此特徵有利於解決部份工程問題，如應力集中、引導組裝、觸感等，但同時也衍生出其他的問題，在網格化時，容易產生劣質網格、在進行特徵辨識時，使拓樸結構複雜化。因此本研究擬發展一技術能夠辨識出CAD模型中的混接面，並應用於以上各方面。混接面辨識的程序中，使用者必須輸入閾值，之後由各面的平滑連續性重建拓樸結構並計算曲面的各式參數。根據以上的資訊，程式利用判斷條件篩選出混接面，而後經由模型中實際的混接情形來制定分類基準，並將混接面分類。最後藉著與商用辨識軟體比較測試結果來驗證本研究之正確性和探討混接面辨識演算法於眾多案例中的辨識情形，並點出目前辨識結果中具有問題處供後續研究參考。
Blend face (also called fillet) is one of the most viewed features in CAD models. While it benefits a CAD model for assembling or solving stress concentration, a fillet simultaneously causes other problems such as low quality in mesh generation or more complex topology in feature recognition. The aim of this study is to present a method for the recognition of blend faces in order to solve the problems as mentioned above. Through the input of a threshold, the proposed procedure of the blend faces recognition is to build the topological data of edges and faces, and compute some important parameters from faces. By these data, it can recognize blend faces from the CAD model and classify them. Several industrial parts are presented to verify the feasibility and accuracy of the proposed method.
[1] G. Kós, R. R. Martin and T. Várady, “Methods to recover constant radius rolling ball blends in reverse engineering”, Computer Aided Geometric Design, Vol. 17, No. 2, pp. 127-160, February 2000.
[2] I. C. Braid, “Non-local blending of boundary models”, Computer-Aided Design, Vol. 29, No. 2, pp. 89-100, February 1997.
[3] X. Cui, S. Gao and G. Zhou, “An Efficient Algorithm for Recognizing and Suppressing Blend Features”, Computer-Aided Design and Applications, Vol. 1, No. 1-4, pp. 421-428, 2004.
[4] S. Venkataraman and M. Sohoni, “Blend Recognition Algorithm and Applications”, The sixth ACM Symposium on Solid Modeling and Applications, pp. 99-108, 2001.
[5] B. Li and J. Liu, “Detail Feature Recognition and Decomposition in Solid Model”, Computer-Aided Design, Vol. 34, No. 5, pp. 405-414, 2002.
[6] J. Li, G. Tong, D. Shi, M. Geng, H. Zhu and I. Hagiwara, “Automatic Small Blend Recognition from B-rep Models for Analysis”, Engineering with Computers - EWC, Vol. 25, No. 3, pp. 279-285, 2009.
[7] N. Joshi and D. Dutta, “Feature Simplification Techniques for Freeform Surface Models”, Journal of Computing and Information Science in Engineering, Vol. 3, No. 3, pp. 177-186, 2003.
[8] H. Mounir, A. Nizar and B. Abdelmajid, “CAD model simplification using a removing details and merging faces technique”, Journal of Mechanical Science and Technology, Vol. 26, No. 11, pp. 3539-3548, November 2012.
[9] S. Venkataraman, M. Sohoni and R. Rajadhyaksha, “Removal of blends from boundary representation models”, Proceedings of the seventh ACM symposium on Solid modeling and applications, pp. 83-94, 2002.
[10] H. Zhu and C. H. Menq, “BRep model simplification by automatic fillet round suppressing for efficient automatic feature recognition”, Computer-Aided Design, Vol. 34, No. 2, pp. 109-123, February 2002.
[11] Elysium Global, Available at: http://elysiuminc.com/, Accessed 14 July 2014.
[12] Rhinoceros, Available at: http://www.rhino3d.com/, Accessed 14 July 2014.
[13] GrabCAD, Available at: https://grabcad.com/, Accessed 14 July 2014.
[14] McNeel Wiki, Available at: http://wiki.mcneel.com/homepage, Accessed 14 July 2014.
