以實驗方法建立圓環鍛粗加工的異向性摩擦模型及其驗證

簡易檢索 / 詳目顯示

回結果列表

研究生：	葉哲宇 zhe-yu Ye
論文名稱：	以實驗方法建立圓環鍛粗加工的異向性摩擦模型及其驗證 Establish the anisotropy friction model of ring upsetting and verification by experimental method
指導教授：	葉維磬 Wei-Ching Yeh
口試委員:
學位類別：	碩士 Master
系所名稱：	工學院 - 機械工程學系 Department of Mechanical Engineering
畢業學年度：	99
語文別：	中文
論文頁數：	95
中文關鍵詞：	鍛粗、摩擦、異向性、有限元素分析
外文關鍵詞：	finite element analysis, anisotropy, friction, Upsetting
相關次數：	點閱：7 下載：0
分享至:	分享至facebook 分享至twitter

查詢本校圖書館目錄查詢臺灣博碩士論文知識加值系統勘誤回報

在鍛粗過程中模具與材料之間的摩擦為影響變形的主因之一，為了瞭解摩擦所造成的不均勻變形(異向性變形)。本文利用車削、銑削及研磨作出定性、定量的模具與不同的表面形貌的詴片來進行圓環鍛粗加工實驗，在有潤滑條件下研究模具與詴片因表面相互影響所產生的異向性變形，以實驗方法建立一個圓環鍛粗加工的異向性摩擦模型。並且結合有限元素作分析，以不同的幾何外型(圓柱)驗證，比較端面輪廓與桶脹輪廓是否精確。如此可有效的預測因摩擦產生的異向性變形，來達到節省成本的目的。

In the process of upsetting, one of the main reason of deformation is friction, for understand the anisotropy deformation by friction. We make different surface morphology specimen and mold, used turning, milling and grind. Conduct ring upsetting experiment at lubricating environment research surface affect anisotropy deformation by specimen and mold, used experiment establish a anisotropy deformation model. Combine finite element analysis, verification different geometry(cylinder). Compare specimen surface profile and bulged profile. Forecast anisotropy deformation by friction

摘要...................................................... i
Abstract ................................................ ii
誌謝 ................................................... iii
目錄 .................................................... iv
表目錄 .................................................. vii
圖目錄 ................................................. viii
第一章 緒論 ............................................... 1
1-1 前言 ................................................. 1
1-2 文獻回顧 .............................................. 2
1-3 研究目的與動機 ......................................... 7
1-4 本文流程架構 ........................................... 8
第二章 實驗方法與步驟 ....................................... 9
2-1實驗方法 ............................................... 9
2-1-1詴片規格與準備 ....................................... 10
2-1-2機械性質測詴-MTS 拉伸詴驗...............................10
2-2實驗步驟與條件 ......................................... 12
2-3量測.................................................. 13
2-3-1 CCD內外徑量測....................................... 14
2-3-2 表面輪廓之量測及繪製.................................. 14
2-3-3 側向桶脹輪廓量測..................................... 15
第三章 有限元素分析 ........................................ 16
3-1 有限元素法於塑性加工上之應用 ............................. 16
3-1-1 塑性加工之迭代準則 ................................... 18
3-2 DEFORM 有限元素軟體 ................................... 19
3-2-1 DEFORM軟體介紹 ..................................... 19
3-2-2 DEFORM使用流程 ..................................... 22
3-3 DEFORM模擬參數 ....................................... 24
3-3-1 摩擦異向性 ......................................... 25
第四章 結果與討論 .......................................... 27
4-1圓環鍛粗實驗結果 ........................................ 27
4-2摩擦異向性模式-數學關係式 ................................ 28
4-3圓環鍛粗實驗結果及理論驗證 ............................... 30
4-4圓柱鍛粗實驗結果與理論驗證 ............................... 31
4-4-1圓柱端面輪廓 ......................................... 31
4-4-2圓柱桶脹輪廓 ......................................... 32
第五章 結論與建議 .......................................... 33
5-1 結論 ................................................ 33
5-2 建議 ................................................ 34
參考文獻 ................................................. 35
附錄一.....................................................76
附錄二.....................................................77
附錄三.....................................................78
附錄四.....................................................79
附錄五.....................................................80
附錄六.....................................................81

                                

[1] Kunogi, M., "A new method of cold extrusion.", J. of the Scientific Research Institute, Vol.50, pp215-246, 1956.
[2] Male, A. T. and Cockcroft, M. G., "A method for the determination of the coefficient of friction of metals under conditions of bulk plastic deformation ", J. of the Inst. of Metals, Vol. 93, pp. 38-46, 1965.
[3] Male, A. T. and Depierre, V., "The validity of mathematical solutions for determining friction from the ring compression test", Journal of Lubrication Technology, pp. 389-397, 1970.
[4] Schey, J. A., "Metal deformation process friction and lubrication" American Society for Metals, Ohio, pp. 603-659, 1970.
[5] Lee, C. H. and Altan, T., "Influence of flow stress and friction upon metal flow in upset forging of rings and cylinders", Journal of Engineering for Industry, pp. 775-782, 1972.
[6] Pohlandt, K., "Upsetting test for determining flow curves after rastegaev" Ind.-Anz., Vol. 101, pp. 28-29., 1979.
[7] Schey, J. A. and Venner, T. R., "Shape changes in the upsetting of slender cylinders", Journal of Engineering for Industry, pp. 79-83, 1982.
[8] Lakshmipathy, R. and Sagar, R., "Effect of die surface topography on die-work interfacial friction in open die forging", Int J Mach Tools Manufact Vol.32, pp. 685–693, 1992.
[9] Xue, K. M., Lu, Y., Liu, H. H. and Zhao, X. M., "Numerical soulation and experimental research into the process of twist-compression forming", Advanced Technology of Plasticity, Vol.2, pp. 1065-1070, 1993.
[10] M. Geiger, U. Engel, S. Niederkom and M. Pfestorf, "Experimentalinvestigation of contact phenomena in cold forging", ICFG plenary meeting, 1995.
[11] Hsu, T. C. and Lee, C. H., "Realistic friction modeling for simple upsetting", Journal of Society of Tribologists and Lubrication, pp. 367 -373, 1997.
[12] S. Y. Lin, "Analysis of the dissimilar interface frictional constraints during", The International Journal of Advanced Manufacturing Technology, Vol. 13, No.9, pp. 601-610, 1997.
[13] Sofuoglu H. and Rasty J.,"On the measurement of friction coefficient utilizing the ring compression test", Tribology International,Vol. 32, pp. 327-335, 1999.
[14] Dutton, R. E., Seetharaman, V., Goetz, R. I., and Semiatin, S. L., "Effect of flow softening on ring test calibration curves", Materials Science and Engineering, Vol. 270, pp. 249-253, 1999.
[15] Hu, Z. M. and Dean, T. A., "A study of surface topography, friction and lubricants in metalforming", International Journal of Machine Tools and Manufacture, Vol. 40, pp. 1637-1649, 2000.
[16] Han, H., "Influence of material anisotropy and friction on ring deformation", Journal of Tribology, Vol.124, No. 3, pp. 637-644, 2002.
[17] Malayappan, S. and Narayanasamy, R., "An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces", Int J Adv Manuf Sci Technol, vol 23, pp636–643, 2004.
[18] Y. G. An and H. Vegter, "Analytical and experimental study of frictional behavior in through-thickness compression test", Journal of Materials Processing Technology 160, 148–155, 2005.
[19] S. Malayappan and G. Esakkimuthu, "Barrelling of aluminium solidcylinders during cold upsetting with differential frictional conditions at the faces", The International Journal of Advanced Manufacturing Technology, Vol. 29, No.1-2, pp. 41-48, 2006.
[20] Sahin, M., Cetinarslan, C. S. and Akata, H. E., "Effect of surface roughness on friction coefficients duringupsetting processes for different materials", Materials and Design, Vol. 28, pp. 633-640, 2007.
[21] Cetinarslan, C. S., "Effect of aspect ratio on barreling contour and variation of total surface area during upsetting of cylindrical specimen", Materials and Design 28, pp. 1907-1913, 2007.
[22] Rao, J. B., Kamaluddin, S., Rao, J. A., Sarcar, M. M. M. and Bhargava, N. R. M. R., "Deformation behavior of Al-4Cu-2Mg alloy during cold upset forging", Journal of Alloys and Compounds, Vol. 471, pp. 128-136, 2009.
[23] Zhang, Z. J., Daia, G. Z., Wu, S. N., Dong, L. X. and Liu, L. L., "Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D", Materials Science and Engineering :A, Vol. 499, pp. 49-52., 2009.
[24] Menezes, PL., Kumar, K., Kishore, R. and Kailas, SV., "Influence of friction during forming processes - a study using a numerical simulation technique", The International Journal of Advanced Manufacturing Technology, Vol. 40, pp. 1067-1076, 2009.
[25] H. L. Costa and I. M. Hutchings, "Effects of die surface patterning on lubrication in strip drawing", journal of materials processing technology 209, 1175–1180, 2009.
[26] ASTM B557M-84, "Standard methods of tension testing of wrought and cast aluminium and magnesium alloy products", Annual Book of ASTM Standards 02. 02., pp. 466-476, 1995.
[27] Hosford, R. M., and Caddle, R. M., "Metal forming mechanics and metallurgy", Prentice-Hall, Inc. A Division of Simom & Schuster Englewood Cliffs, NJ 07632, 1983.

簡易檢索 / 詳目顯示

相關論文