使用Matlab撰寫稜鏡消色差優化程式與三片透鏡組程式設計，其中稜鏡消色差優化程式包含兩片及三片稜鏡。兩片稜鏡的挑選是從固定偏向角及消除一次色散的條件下，得到薄稜鏡的頂角，再挑選二次色散值最小值，即兩片材質的相對部分色散值 相差越小、V-number相差越大越好，最後利用優化方法修正真實稜鏡的誤差。
三片稜鏡挑選是在固定偏向角及消除一次色散、二次色散的條件下，得到薄稜鏡的頂角，由自訂第四、第五段波長的偏向角差值選取色散最小值，最後利用優化方法修正真實稜鏡的誤差。
三片透鏡組程式設計是以Kingslake的設計為規格，利用固定焦距及消除三階像差得到薄透鏡初階設計，並且用光扇圖面積來進行鏡組加厚後的優化，從光扇圖面積曲線圖來選擇適當的形狀因子，使其滿足設計規格。

The study supposes to design two optimized programs for choosing doublet, triplet prisms to correct chromatic aberration and triplet lenses design by using Matlab software. When choosing the glasses for doublet prisms, fixing the deviation angle of d-line and eliminating the primary color with the paraxial condition that utilized to solve the two prism vertex angles are necessary. In order to reduce the secondary spectra, the relative partial dispersions of two glasses that we selected should be much close to each other, and their Abbe numbers should be much more different. Finally, the chromatic aberration for real ray tracing can also be corrected by optimized program.
For choosing the triplet prisms, we follow the same steps when choosing the doublet prisms. In order to reduce the residual spectra, it is better for finding the smaller specific value of the fourth and the fifth spectrum. Finally, the chromatic aberration for real ray tracing can be
The other is the Taylor type triplet lenses design and the specifications of as described by Kingslake. Three powers of the thin lenses and two air spaces that between the three lenses are determined by the specified values of equivalent power, Petzval sum, longitudinal chromatic aberration, and the lateral chromatic aberration. The three lens shape-factors of the triplet lenses are determined by desired values of the three Seidel sums that related to the coma, astigmatism, and the spherical aberration. Finally, after selecting suitable thicknesses, and calculating the air spaces to maintain the thin-lens separations, the area of ray fan is used to optimize the lens shape- factors.

[1] W. J. Smith, Modern Optical Engineering,3rded.,McGraw-Hill, New York , 2000.
[2] 張弘，幾何光學，初版，東華書局，臺北市， 民國82年。
[3] Web data: Optical glass catalog(SCHOTT AG), from
http://www.schott.com/advanced_optics/english/our_products/materials/data_tools/index.html
[4] 孫文信，「精調三階像差各分項目標值的鏡組優化設計」，國立中央大學，博士論文，民國91年。
[5] D. P. Feder,“Automatic Optical Design”,Appl. Opt., Vol. 2, 1209-1226,1963.
[6] C. G. Wynne and P. M. J. H. Worme,“Lens Design by Computer”,Appl. Opt., Vol. 2,1233-1238,1963.
[7] G. H. Spencer,“A Flexible Automatic Lens Correction Procedure”,Appl. Opt., Vol. 2,1257-1264,1963.
[8] J. Meriron,“Damped Least-Squares Method for Automatic Len Design ”,J. Opt. Soc. Am., Vol. 55,1105-1109, 1965.
[9] J. H. Jamieson, Optimization Techniques in Lens Design, American Elsevier, New York,1971.
[10] E. Hecht, Optics, 4th ed. , Addison Wesley, San Francisco, 2002.
[11] 龔純，Matlab 語言常用算法程序集，電子工業出版社，民國97年。
[12]李靜君，「稜鏡玻璃選取對色差的影響與校正」，國立中央大學，碩士論文，民國96年。
[13] R. Kinslake, Lens Design Fundamentals, Rochester, New York,1980.
[14] W. T. Welford, Aberrations of the Symmetrical Optical Systems,Academic Press, London,1974
[15] V. N. Mahajan, Optical Imaging and Aberration, Part I:Ray Geometrical Optics, SPIE,Washington,1998
[16] L. Seidel,“Entwicklung der Glieder 3.ter Ordnung, welche den Weg eines ausserhalb der Ebene der Axe gelegenen Lichtstrahles durch ein System brechender Medien bestimmen,” Astronomische Nachrichten, Vol. 43 , 289–332,1856
[17] Web data: Geunyoung Yoon, Ph.D. , “Aberration theory”, from http://cfao.ucolick.org/pubs/presentations/eyedesign/05_aberrations_GY.pdf
[18] Gregory Hallock Smith, Practical Computer-Aided Lens Design,Richmond, Va.: Willmann-Bell, 1998
[19] N. V. D. W. Lessing, “Selection of optical glasses in apochromats”,J. Opt. Soc. Am., Vol. 47, 955-958 ,1957.
[20] N. V. D. W. Lessing, “Selection of Optical Glasses in Taylor Triplets (General Method)”, J. Opt. Soc. Am., Vol. 49,31-34 ,1959.
[21] R. E. Stephens,“The Design of Triplet Anastigmat Lenses of the Taylor Type”,J. Opt. Soc. Am., Vol. 38,1032-1039, 1948.
[22]林遠紹，「三片鏡組的設計方法」，輔仁大學，碩士論文
，民國72年。
[23] Rudolf Kingslake, Applied Optics and Optical Engineering, Vol. 3,Accademy press, N. Y.,1965.
[24] Herzberger,“Analysis of Spot Diagram”,J. Opt. Soc. Am., Vol. 47,584,1957.
[25] 張鎬鵬，「光學成像系統之調變轉換函數理論」，國立成功大學，碩士論文，民國94年。
[26] Joseph W. Goodman, Introduction to Fourier Optics, 3rd ed., Roberts & Company Publishers,2004.
[27] Joseph M. Geary, Introduction to Lens Design, Willmann-Bell,U.S.A.,2004.
[28] W. S. Sun, T. C. Lin, C. C. Sun, H. Chang, M. W. Chang, and C. Y. Chen,“The design of a triplet with a shape-dependent third-order aberration optimization technique”,J. Mod. Opt., Vol. 51,705-724,2004.