簡易檢索 / 詳目顯示
| 研究生： |
施妮嵐 Ni-lan Shi |
|---|---|
| 論文名稱： |
製程能力指標Cpm之檢定的模擬研究 A Simulation Study for Tests of Process Capability Index Cpm |
| 指導教授： |
許玉生
Yu-Sheng Hsu |
| 口試委員: | |
| 學位類別： |
碩士 Master |
| 系所名稱： |
理學院 - 數學系 Department of Mathematics |
| 畢業學年度： | 96 |
| 語文別： | 中文 |
| 論文頁數： | 66 |
| 中文關鍵詞： | 製程能力指標 |
| 外文關鍵詞： | Process Capability Index |
| 相關次數： | 點閱：6 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
製程能力指標(process capability index)為製程品質之ㄧ種量化，為品質管制之重要參考依據，通常Cpm之檢定用最大概似估計式為檢定統計量，本文另提出Cpm之一般概似函數比檢定，因理論推導不易，故本文將用計算機模擬方式討論此二檢定。
Process capability indices quantify the quality of productionprocess based which decisions can be made for quality control. In this paper, we present generalized ratio test for Cpm and make comparisons with traditional test based on maximum likelihood estimators. Since theoretical comparisons are difficult, we make comparisons by computer simulations.
1.Barnett,N.S. (1996). Process control and product quality: the C_p and Cpk revisited. Internation Journal of Quality and Reliability Management, 7(5), 34-43.
2. Bothe, D. R. (1997). Measuring Process Capability. McGraw-Hill, New York, N.Y.
3. Chan, L. K., Cheng, S. W. and Spiring , F. A. (1988). A new measure of process capability : Cpm. Journal of Quality
Technology., 20(3), 162-175.
4. Chen, S. M. and Hsu, Y. S. (2004). Uniformly Most Powerful Test
for Process Capability Index Cpk. Quality Technology of
Quantitative Management ,1(2),257-269.
5. Coleman, D. E. (1991). Relationships between loss and
capability indices Applied Math. Comp. Technical Center. PA.
6. Gensidy, A. (1985).Cp and Cpk ASQC Quality Congress Transactions -Nashville, 186-192.
7. Kotz, S. and Johnson, N. L. (1999).Delicate relations
among the basic process capability indices Cp,Cpk,Cpm and
their modifaction. Communications. Statistics-Theory and
Method, 26, 849-861.
8. Kotz, S. and Johnson, N. L. (1993). Process Capability Indices. Chapman and Hall, London, U.K.
9. Kotz, S. and Johnson, N. L. (2002). Process capability indices-a review, 1992-2000. Journal of Quality Technology , 34(1), 2-53.
10. Kotz, S. and Lovelace C. R. (1998). Process Capability Indices in Theory and Practice, Arnold, London, U.K.
11. Kane, V. E. (1986). Process capability indices. Journal of Quality Technology, 18(1), 41-52.
12. Bickel,P. J. and Doksum,K. A. (1977). Mathematical
Statistics.Holden-Day,c1977.
13. Pearn, W. L., Kotz,S. (2006). Encyclopedia and Handbook of Process Capability Indices.,World Scient Publishing Co.Pte.Ltd.
14. Pearn, W. L., Kotz,S. and Johnson, N. L. (1992).
Distributional and inferential properties of process capability
indices. Journal of Quality Technology, 24(4), 216-231.
15. Ramakrishnan, B., Sandborn, P. and Pecht, M. (2001). Process capability
indices and product reliability. Microelectronics Reliability,
41(12), 2067-2070.
