1. Bathe, “Finite Element Procedures”, Prentice-Hall,Inc.,1996
2. Ceretti E., Giardini C. and Maccarini G., “Theoretical and Experim-ental
Analysis of non-Axisymmetrical Deep Drawing”, Journal of Materials
Processing Technology, Vol.54, pp375~384,1995.
3. Choi T. H. and Huh H., “Sheet metal forming analysis of planar
anisotropic materials by a modified membrane finite element method
with bending effect”, Journal of Materials Processing Technology v.89
n.1 pt.0 pp.58-64, 1999.
3. Daw-Kwei Leu, “The limiting drawing ratio for plastic instability of
4. the cup-drawing process”, Journal of Materials Processing Technology
v.86 pp.168-176, 1999.
5. Designation: E8M-91, Standard Test Methods for Tension Testing of
Metallic Materials [Metric], p.150-168.
6. “Element Library”, MARC Analysis Research Corporation. Volume B.
Version K7.pp3.345~3-350
7. Hibbitt H.D., Marcal P.V and Rice J.R., “A Finite Element Formulation
for problems of large strain and large displacement”, Int. J. Soilds
Struct., Vol.6 pp.1069-1086, 1970
8. Jiang Lei, Chernuka Michael W. and Pegg Neil G. “A co-rotational,
updated Lagrangian Formulation for Geometrically Nonlinear Finite
Element Analysis of Shell Structures”, Finite Element in Analysis and
Design, Vol.18, pp.129-140. 1994.
9. Jung D. W. and Yang D. Y., “Step-wise combined implicit-explicit
finite-element simulation of autobody stamping processes” , Journal of
Materials Processing Technology v.83 n.1 pt.0 pp.245-260, 1998.
10. Kim Sangdo, Minho Park, Sangjjin Kim and Daegyo Seo, “Blank
Design and Formability for non-Circular Deep Drawing Process by
Finite-Element Method”, Journal of Materials Processing Technology,
vol.75, pp.94-99, 1998.
11. Lei Liping and Kang Beom-Soo, “Finite Element Analysis and Design in
Stainless Steel Sheet Forming and its Experimental Comparison”, The
18th MARC Users’ Meeting, pp.73-81, 1998
12. Majlessi S.A and Lee D., ”Deep Drawing of Square-Shapes Sheet Metal
Parts, Part 1:Finite Element Analysis”, Transactions of the ASME
Journal of Engineering for Industry, Vol.115, pp.102-109,1993
13. Mcmeeking R.M. and Rice J.R., “Finite Element Formulation for
Problem of Large elastic-plastic deformation”, Int. J. Soilds Struct. ,
Vol.11, pp.601-616.
14. “Mentat Command Reference”, MARC Analysis Research Corporation.
Version 3.1, pp3.345~3-350
15. Owen D.R.J. Hinton E. “Finite Element in Plasticity：Theory and
Practice”,1985.
16. Shim H.B. and Yang D.Y., “Elastic-Plastic Finite Element Analysis of
Deep Drawing Process by Membrane and Shell Elements”, Journal of
Manufacturing Science and Engineering, Vol.119,pp.341-349,1997.
17. Tetsuo Naka and Fusahito Yoshida, “Deep drawability of type 5083
aluminium-magnesium alloy sheet under various conditions of
temperature and forming speed” , Journal of Materials Processing
Technology v.89 n.1 pt.0 pp.19-23, 1999.
18. “Theory and user information”, MARC Analysis Research Corporation.
Volume A. Version K7.
19. Toshihiko Kuwabara, Kouji Akiyama and Yuuji Nakayama, “Square
Shell Drawing Characteristics of Aluminum Alloy Sheet A5182-O”,
Journal of Materials Process Technology, Vol.38, pp737~749, 1993.
20. Wang N.M. and Tang S.C., “Analysis of Bending Effects in Sheet
Forming Operations”, Int. J. for Num. Meth. in Engng., Vol.25,
pp253~267, 1998.
21. Yang D.Y., Chung W.J. and Shim H.B., “Rigid –Plastic Finite Element
Analysis of Sheet Metal Forming Process with Initial Guess
Generation” , International Journal of Mechanical Sciences, Vol.32,
No.8. pp.687-708, 1990.
22. Yasuo Marumo, Hiroyuki Saiki and Toshihiko Mori, “Combined effects
of strain hardening characteristics and tool geometry on the deepdrawability
of square aluminum cups”, Journal of Materials Processing
Technology v.89 n.1 pt.0 pp.30-36, 1999.
23 莊智凱, 方杯引伸成形之下料板件外形設計, 國立台灣大學工程
學刊,第六十八期,121-136 頁, 民國八十五年十月。
24. 張仕冬, 三維面對稱擠製之實驗研究, 碩士論文, 國立中央大學
機械工程研究所, 1998。
25. 何信森, 方杯引伸成形之彈塑性有限元素分析, 中華民國力學學
會第廿三屆全國力學會議論文集(三), 187-194 頁,民國八十八年。