離散多頻（DMT）調變/解調方法是非對稱數位用戶迴路（ADSL）系統中標準的實體層傳輸技術。在離散多頻的傳收機中，通道的等化是經由兩個步驟所完成的，稱為時域等化器（TEQ）及頻域等化器（FEQ）。時域等化器的目的是用來縮短通道響應長度。而頻域等化器則是被用來補償信號經過通道時所造成的大小及相位的失真。
在本論文中，我們利用MATLAB完整的模擬此演算法並驗證其正確性。模擬的結果顯示TEQ-based ADSL接收器可以有效的將通道響應縮短，並且在頻率軸成功的把傳送的QAM 符號還原，我們利用SNR，SSNR，GSNR以及傳輸速率來評估其效能。
另一方面，在資料通路設計(datapath)上，我們針對通訊系統實際應用上不同運算需要，設計了不同種類的乘法累加器，包括single-MAC, dual-MAC,以及subword-MAC，我們提出了可參數化數位訊號處理器設計方法論，包括乘法器的位元長度以及保護字元，並且利用硬體描述語言Verilog完成了一系列針對通訊系統設計的可參數化資料通路設計。

Discrete multiton (DMT) modulation/demodulation scheme is the standard physical-layer transmission technology in ADSL system. In DMT transceiver, channel equalization is carried out through time domain equalizer (TEQ) and frequency domain equalizer (FEQ). TEQ is introduced to shorten the channel response to a pre-defined length. On the contrary, FEQ is used to compensate the magnitude and phase distortion caused by channel.
In this thesis, we use MATLAB to simulate the whole TEQ-FEQ algorithm and verify the correctness of this algorithm. The simulation results show that TEQ-based ADSL transceiver shorten the channel impulse response effectively, and recover the transmitted QAM-symbol in frequency domain. We evaluate the performance of this algorithm by SNR, SSNR, GSNR, and data rate.
On the other hand, we design different kinds of MAC for communication system requirements, include single-MAC, dual-MAC, and subword-MAC. We propose the parameterized DSP processor design methodology, and the word length and guard bit in MAC are be parameterized. We implement the parameterized DSP data path by hardware description language-Verilog.

[1] J. S. Chow, J. C. Tu, and J. M. Cioffi, “A discrete multitone transceiver system for HDSL applications,” IEEE J. Select. Areas Commun., vol. 9, pp. 895-908, Aug. 1991.
[2] K. Sistanizadeh, P. Chow, and J. M. Cioffi, “Multi-tone transmission for asymmetric digital subscriber lines (ADSL),” in Proc. ICC’93, pp. 756-760, 1993.
[3] G. H. Im, D. D. Harman, G. Huang, A. V. Mandzik, M. H. Nguyen, and J. J. Werner, “51.84 Mb/s 16-CAP ATM LAN standard,” IEEE J. Select. Areas Commun., vol. 13, pp. 620-632, May 1995.
[4] P. S. Chow, J. C. Tu, and J. M. Cioffi, “Performance for a multichannel transceiver system for ADSL and VHDSL services,” IEEE J. Select. Areas Commun., vol. 9, no. 6, pp. 909-919, Aug. 1991.
[5] I. Kalet, “The multitone channel,” IEEE Trans. Commun., vol. 37, no. 2, pp. 119-124, Feb, 1989.
[6] J. M. Cioffi, A Multicarrier Primer. Amati Communication Corporation and Stanford University, T1E1.4/97-157, Nov. 1991.
[7] J. S. Chow, J. M. Cioffi, and J. A. C. Bingham, “Equalizer training algorithms for multicarrier modulation systems,” in Int. Conf. Commun., Geneva, May 1993, pp.761-765.
[8] Network and Customer Installation Interfaces: Asymmetrical Digital Subscriber Line (ADSL) Metallic Interface, ANSI T1.413, 1995.
[9] I. Lee, J. S. Chow, and J. M. Cioffi, “Performance evaluation of a fast computation algorithm for the DMT in high-speed subscriber loop,” IEEE J. Select. Areas Commun., vol. 13, pp. 1560-1570, Dec. 1995.
[10] A cost-effective TEQ algorithm for ADSL systems Chih-Chi Wang; An-Yeu Wu; Bor-Ming Wang; Communications, 2001. ICC 2001. IEEE International Conference on , Volume: 2 , 2001 Page(s): 398 -402 vol.2
[11] C. S. Chang, “Low-complexity equalization algorithms for DMT transceiver,” Master Thesis, Dep. Of Communication Engineering, NCTU, 1999.
[12] Chiao-Chih Chang, “Design and Implementation of a Baseband Receiver for VDSL ” Master Thesis, Dep. Of Electrical Engineering, NTU, 2000.
[13] Equalization for discrete multitone transceivers to maximize bit rate Arslan, G.; Evans, B.L.; Kiaei,S. ;Signal Processing, IEEE Transactions on [see also Acoustics, Speech, and Signal Processing, IEEE Transactions on] , Volume: 49 Issue: 12 , Dec 2001Page(s): 3123 –3135
[14] T. Pollet, M. Peeters, M. Monnen, and L. Vandendorpe, " Equalization for DMT based broadband modems," IEEE Communication Magazine, Vol. 38, pp. 106-113, May 2000
[15] T. Pollet and M. Peeters, " Synchronisation with DMT modulation," IEEE Communication Magazine, Vol. 37, pp.80-96, April 1996.
[16] C. C. Chang, M. S. Wang, T. D. Chiueh, “Design of a dmt-based baseband transceiver for very-righ-speed digital subscriber lines,” IEEE APASIC, pp. 367-370, 2002.
[17] M. H. Tsai, “DSP Processor Approaches for The Synchronization Loop in DMT-Based VDSL” Master Thesis, Dep. Of Electrical Engineering, NCU, 2001.
[18] Adapted optimization criterion for FDM-based DMT-ADSL equalization Van Kerckhove, J.-F.; Spruyt, P.; Communications, 1996. ICC 96, Conference Record, Converging Technologies for Tomorrow''s Applications. 1996 IEEE International Conference on , Volume: 3 , 23-27 June 1996 Page(s): 1328 -1334 vol.3
[19] M. V. Bladel and M. Moeneclaey, “Time-domain equalization for multicarrier communication,” in Global Conf. Telecommun., pp. 167-171, 1995.
[20] P. J. W. Melsa, R. C. Younce, and C. E. Rohrs, “Impulse response shortening for discrete multitone transceivers,” IEEE Trans. Commun., vol.44, pp.1662-1672, Dec. 1996.
[21] N. Al-Dhahir and J. M. Cioffi, “Optimum finite-length equalization for multicarrier transceivers,” IEEE Trans. Commu., vol. 44, no. 1, pp. 56-64, Jan. 1996.
[22] Peter M. Clarkson “Optimal and Adaptive Signal Processing”
[23] Y.T.Chen, MS Thesis : Embedded DSP Datapath for Communication System. Dep. Elec.Eng., National Central University, Taiwan, June, 2001
[24] Verbauwhede and M. Touriguian, “A low power DSP engine for wireless communications” Journal of VLSI Signal Processing Systems, vol.18, no.2, Feb.1998
[25] J. Warden, “Sub-Word Parallelism in Digital Signal Processing”, IEEE Signal Processing Magazine, March, pp.27-35, 2000. Processing”, IEEE Signal Processing Magazine, March, pp.27-35, 2000.
[26] Y.H.Huang, “Design and Implementation of A Communication Digital Signal Processor for OFDM-Based Software Radio”, National Taiwan University, Taiwan, May, 2001.
[27] B.W.Kim, J.H.Ynag, C.S.Hwang, Y.S.Kwon, K.M.Lee, I.H.Kim, Y.H.Lee, C.M.Kyung,“MDSP-II: a 16-bit DSP with Mobil Communication Accelerator”. IEEE J.Solid-States Circuits, 34(3):397-403,Mar 1999.
[28] Y. H. Huang, “Design and Implementation of A Communication Digital Signal Processor for OFDM-Based Software Radio”, National Taiwan University, Taiwan, May, 2001.
[29] C. H. Tang “Parameterized and Embedded DSP Data path for Communication System” Dep. Elec. Eng., National Central University, Taiwan, June, 2002.
[30] Ya-lan Tsao, Shyh Jye Jou, Hsiao Ping Lee, Yi-Ting Chen, Ming Hsuan Tan “An Embedded DSP Core for Wireless Communication”, ISCAS, pp.524-527, 2002
[31] M. H. Tan“Parameterized and Embedded DSP Core for Communication Application”Dep. Elec. Eng., National Central University, Taiwan, June, 2002
[32] DesignWare Cell Library Online Document