發展一協同設計專案之事件管理系統｜國立中央大學博碩士論文系統

簡易檢索 / 詳目顯示

回結果列表

研究生：	郭韋呈 Wei-cheng Kuo
論文名稱：	發展一協同設計專案之事件管理系統 Developing an Event Management System for Distributed Collaborative Design Project
指導教授：	高信培 Hsing-Pei Kao
口試委員:
學位類別：	碩士 Master
系所名稱：	管理學院 - 工業管理研究所 Graduate Institute of Industrial Management
畢業學年度：	97
語文別：	英文
論文頁數：	58
中文關鍵詞：	協同產品開發、流程建模、服務導向架構、物件導向設計、事件管理
外文關鍵詞：	Event Management, Collaborative Product Development, Process Modeling, Service-Oriented Architecture, Object-Oriented Design
相關次數：	點閱：15 下載：0
分享至:	分享至facebook 分享至twitter

查詢本校圖書館目錄查詢臺灣博碩士論文知識加值系統勘誤回報

現今產品開發已逐漸朝向跨企業的分散式的協同設計，因此有效的資訊傳遞於產品
開發專案成為一重要議題。然而在協同設計過程中，除了規劃專案初期所預設的里程碑
與事件之外，存在著各種非預期的例外事件；例如資源短缺、活動延遲等。例外事件導
致的問題往往因無法及時處理，而造成整個開發專案延宕甚至失敗。
本研究針對協同設計環境下，提出一基於服務導向架構之事件管理系統，此架構目
的在於管理日常事件以及例外事件之發生。在此架構中系統執行共分三階段，服務開
發、服務尋找以及服務結合，其三階段分別使用之方法如下：(1) 物件導向概念定義出
產品開發流程中相關物件。(2) 應用事件分類手法管理服務清單。(3) 應用extended EPC
結合相關服務解決相對應事件。最後以電子書閱讀器產業為一案例做說明。

In the current product development project, it has been gradually towered distributed
collaborative design. The effectiveness of information transmission is becoming a critical
issue. However, in the collaborative design process, there is not only the planning of the
pre-set milestones and events, but also all kinds of exceptional events; such as the shortage of
resources, delay of activities. Because we cannot deal with it in time, exceptional events
usually lead to problems like delays or even failure.
This thesis develops a framework of event management system (EMS) for the
collaborative product design based on the service-oriented architecture. For the developing
EMS, the corresponding methodologies were also adopted.
1. Object-oriented modeling technique was adopted to model the basis of the entire
system;
2. Events classification was applied to find the related service
3. Extend Event-driven Process Chain (eEPC) bound the needed services to a solution.
By applying event management system, we expect an effective way to handle the
complex situation. Finally, electronic reading device industry is a case for the illustration.

摘要  ................................................................................................................................  i
Abstract  ..........................................................................................................................  ii
Table of Contents .........................................................................................................  iii
List of Figures  ................................................................................................................ v
List of Tables  ...............................................................................................................  vii
Chapter 1 Introduction  ................................................................................................... 1
1 Background  ...................................................................................................... 1
2 Motivation ....................................................................................................... 2
3 Research Objectives ........................................................................................ 2
4 Research Framework  ....................................................................................... 3
Chapter 2 Literature Review.......................................................................................... 5
1 Collaborative Product Design (CPD)  .............................................................. 5
1.1 Introduction to CPD ............................................................................. 5
1.2 Systems for CPD .................................................................................. 6
2 Project Management  ........................................................................................ 7
2.1 Regular Events  ...................................................................................... 8
2.2 Exceptional Events  ............................................................................... 9
2.3 Unexpected Events  ............................................................................. 11
3 Service-Oriented Architecture  ....................................................................... 13
3.1 The Basic SOA  ................................................................................... 14
3.2 SOA Principles ................................................................................... 15
Chapter 3 Architecture of EMS  ................................................................................... 19
1 Introduction to the EMS  ................................................................................ 19
1.1 Characteristics of EMS  ....................................................................... 19
1.2 Benefit of EMS  ................................................................................... 19
2 Architecture of EMS  ...................................................................................... 20
2.1 Service Publishing  .............................................................................. 24
2.2 Service Finding  ................................................................................... 27
2.3 Service Binding .................................................................................. 31
Chapter 4 Development of EMS ................................................................................. 34
1 Service Publishing  ......................................................................................... 34
2 Service Finding  .............................................................................................. 39
3 Service Binding ............................................................................................. 43
Chapter 5 The Implementation of the Proposed System  ............................................. 46
1 Case Description  ............................................................................................ 46
1.1 Case Background  ................................................................................ 46
1.2 Case Scenario ..................................................................................... 46
2 Implementation of Event Management System ............................................ 47
2.1 Service Publishing  .............................................................................. 47
2.2 Service Finding  ................................................................................... 50
3 Execution of Event Management System  ...................................................... 51
3.3 Service Binding .................................................................................. 51
Chapter 6 Conclusions and Future Research  ............................................................... 53
1 Conclusions ................................................................................................... 53
2 Future Research  ............................................................................................. 54
References ................................................................................................................... 55

                                

Bouchlaghem, D., Kimmance, A., & Anumba, C. (2004, April 1). Integrating product and
process information in the construction sector. Industrial Management & Data Systems ,
104 (3), pp. 218-233.
Cheng, E. W., Love, P. E., Standing, C., & Gharavi, H. (2006, January 1). Intention to
e-collaborate: propagation of research propositions. Industrial Management & Data
Systems , 106 (1), pp. 139-152.
Choi, Y., Kim, K., & Kim, C. (2005). A design chain collaboration framework using reference
models. The International Journal of Advanced Manufacturing Technology , 26 (1-2), pp.
183-190.
Derr, K. W. (1995). Applying OMT: A Practical Step-By-Step Guide to Using the Object
Modeling Technique. Englewood Cliffs, NJ: Prentice-Hall.
Erl, T. (2007). SOA Principles of Service Design. Prentice Hall PTR.
Huhns, M. N., & Singh, M. P. (2005, January). Service-Oriented Computing: Key Concepts and
Principles. IEEE Internet Computing , 9 (1), pp. 75-81.
Jiang, P., Shao, X., Qiu, H., & Li, P. (2008). Interoperability of Cross-organizational Workflows
based on Process-view for Collaborative Product Development. Concurrent Engineering ,
16 (1), pp. 73-87.
Kammer, P. J., Bolcer, G. A., Taylor, R. N., Hitomi, A. S., & Bergman, M. (2000). Techniques
for Supporting Dynamic and Adaptive Workflow. Comput. Supported Coop. Work , 9 (3-4),
pp. 269-292.
Klein, M., & Dellarocas, C. (2000, November). A Knowledge-based Approach to Handling
Exceptions in Workflow Systems. Computer Supported Cooperative Work (CSCW) , 9, pp.399-412.
Klein, M., Rodriguez-Aguilar, J.-A., & Dellarocas, C. (2003, July). Using Domain-Independent
Exception Handling Services to Enable Robust Open Multi-Agent Systems: The Case of
Agent Death. Autonomous Agents and Multi-Agent Systems , 7, pp. 179-189.
Krishnan, V., & Ulrich, K. T. (2001). Product Development Decisions: A Review of the
Literature. Management Science , 47 (1), pp. 1-21.
Kvan, T. (2000, July). Collaborative design: what is it? Automation in Construction , 9 (4), pp.
409-415.
Lawrence, T. B., Hardy, C., & Phillips, N. (2002, February). Institutional Effects of
Interorganizational Collaboration: The Emergence of Proto-Institutions. The Academy of
Management Journal , 45 (1), pp. 281-290.
Li, Y., Shao, X., Li, P., & Liu, Q. (2004). Design and implementation of a process-oriented
intelligent collaborative product design system. Computers in Industry , 53 (2), pp.
205-229.
MacKenzie, M., Laskey, K., McCabe, F., Brown, P. F., & Metz, R. (2006, February). Reference
Model for Service Oriented Architecture. Retrieved March 2009, from Organization for
the Advancement of Structured Information Standards (OASIS):
http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=soa-rm
Munns, A. K., & Bjeirmi, B. F. (1996). The role of project management in achieving project
success. International Journal of Project Management , 14 (2), pp. 81-87.
Papazoglou, M. P. (2003). Service -Oriented Computing: Concepts, Characteristics and
Directions. Proceedings of the Fourth International Conference on Web Information
Systems Engineering. Washington, DC, USA: IEEE Computer Society.
Papazoglou, M., & Georgakopoulos, D. (2003). Service Oriented Computing. Communications
of the ACM , 46 (10), pp. 25–28.
Prasad, B. (1996). Concurrent Engineering Fundamentals, Volume II: Integrated Product
Development. Prentice Hall PTR.
Rollason-Reese, R. L. (2003). Incident handling: an orderly response to unexpected events. In
Proceedings of the 31st Annual ACM SIGUCCS Conference on User Services (pp. 97-102).
New York, NY, USA: ACM.
Scheer, A.-W. (2000). ARIS - Business Process Modeling (3 ed.). Berlin: Springer.
Schnabel, I., & Pizka, M. (2007). Software Engineering Research and Practice.
Wang, D., Zhang, P., & Wang, X. (2008). Research on the Model of Unexpected Events
Situation Based on the Life-Cycle. Wireless Communications, Networking and Mobile
Computing, 2008. WiCOM ''08. 4th International Conference on, (pp. 1-4).
Wang, H., Meng, X., & Xu, Y. (2004). Concurrent design in the network environment.
Computer Supported Cooperative Work in Design, 2004. Proceedings. The 8th
International Conference on, 1, pp. 197-201.
Wang, M., & Wang, H. (2004). Agents and Web-services Supported Business Exception
Management. Proceedings of 8th Pacific Rim International Conference on Artificial
Intelligence (PRICAI 2004 (pp. 615-624). Springer.
Wu, H., Zhang, W., & Zhao, X.-a. (2005). The Distributed Parallel Exploitation Technology of
a Distributed Cooperation Exploitation Environment. Computer Engineering & Science ,
8, pp. 88–91.
Xiong, H., & Sun, S. (2007). A Distributed Collaborative Product Customization System Based on Web3D. Computer Supported Cooperative Work in Design, 2007. CSCWD 2007. 11th
International Conference on, (pp. 926-930).
Yu, J., Cha, J., Lu, Y., & Yao, S. (2008). A Service-Oriented Architecture framework for the
distributed concurrent and collaborative design. Service Operations and Logistics, and
Informatics, 2008. IEEE/SOLI 2008. IEEE International Conference on, 1, pp. 872-876.

簡易檢索 / 詳目顯示

相關論文