跳到主要內容

簡易檢索 / 詳目顯示

回結果列表
研究生： 林永常
Y-C Lin
論文名稱： 火箭發射噪音之主動式控制
指導教授： 潘敏俊
Min-Chun Pan
口試委員:
學位類別： 碩士
Master
系所名稱： 工學院 - 機械工程學系
Department of Mechanical Engineering
畢業學年度： 89
語文別： 中文
論文頁數： 69
中文關鍵詞： 火箭發射噪音 、主動式噪音控制 、適應性濾波器
外文關鍵詞： Actuve Noise Control, Analysis of Noise Character
相關次數： 點閱：9  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報


    • 第一章 緒論 1 1.1 研究動機…………………………………………………………1 1.2 相關文獻回顧……………………………………………………2 1.3 主動式噪音消除之基本原理……………………………………3 1.3.1 Young’s principle………………………………………3 1.3.2 Huygen’s principle ……………………………………4 1.3.3 偶極子結構…………………………………………………5 1.3.4 模態控制原理………………………………………………5 1.3.5 自適應性控制基礎理論……………………………………6 1.4 論文架構…………………………………………………………8 第二章 火箭發射噪音特性分析 9 2.1 火箭發射噪音之聲壓時間序列…………………………………9 2.2 火箭噪音之頻譜分析……………………………………………12 2.3 結論………………………………………………………………16 第三章 主動消音控制器之設計 17 3.1 ANC控制結構 ……………………………………………………18 3.1.1 回饋結構……………………………………………………18 3.1.2 前饋結構……………………………………………………20 3.1.3 複合結構……………………………………………………22 3.2 多通道FXLMS演算法 ……………………………………………23 3.3 多通道LMS_ANC演算法 …………………………………………29 第四章 硬體系統架構與實驗設計 33 4.1 駕駛室三維噪音系統……………………………………………33 4.1.1 駕駛室模型…………………………………………………33 4.1.2 喇叭…………………………………………………………35 4.2 訊號處理系統……………………………………………………36 4.2.1 麥克風………………………………………………………36 4.2.2 前級放大器…………………………………………………37 4.2.3 A/D、D/A卡…………………………………………………37 4.2.4 DSP母卡 ……………………………………………………37 4.2.5 後級放大器…………………………………………………38 4.3 實驗設計…………………………………………………………38 4.3.1 第二路徑之系統鑑別………………………………………39 4.3.2 主動消音實驗設計…………………………………………41 第五章 實驗結果及分析 44 5.1 第二路徑系統鑑別………………………………………………44 5.2 多通道FXLMS噪音消除 …………………………………………51 5.2.1 單頻噪音消音………………………………………………51 5.2.2 穩態隨機噪音消音…………………………………………54 5.2.3 火箭發射噪音消音…………………………………………56 5.3 多通道ANC_LMS噪音消除 58 5.3.1 單頻噪音消音………………………………………………58 5.3.2 穩態隨機噪音消音…………………………………………61 5.3.3 火箭發射噪音消音…………………………………………63 5.4 FXLMS與ANC_LMS之比較…………………………………………65 第六章 結論與未來展望 66 參考文獻 67

    1.Bai, M. R. and Hsueh, C. F. (1995). “Active Noise Cancellation by Using the Linear Quadratic Gaussian Independent Modal Space Control,” J. Acoust. Soc. Am., Vol97, No.5, pp.2664-2674.
    2.Bai, M. R. and Chen, H. P. (1996). ”The Modified Feedforward Active Noise Control System for Suppressing Broadband Random and Transient Noises,” J. Sound Vib, Vol198, No.1, pp.81-94.
    3.Bai, M. R. and Lin, H. H. (1997). “Comparison fo Active Noise Control Structures in the Presence of Acoustical Feedback by Using the Synthesis Technique,” J. Sound and Vivration, Vol.206, No.4, pp.453-471.
    4.Bai, M. R. and Lin, Z. H. (1998). “Active Noise Cancellation For a Three-Dimensional Enclosure by Using Multiple-channel Adaptive Control and Control,” ASME, J. Vib. Acoust., Vol.120, pp.958-964.
    5.Bai, M. R. and Wu, H. P., (1998). “Robust Control Design of a Sensorless Bass-enhanced Moving-Coil Loudspeaker System,” ASME, J. Vib. Acoust., to appear.
    6.Bao, C., Sas, P. and Van brussel, H. (1991). “Active control of engine induced noise inside cars”, Proc. Inter-noise 91, Sydney, Australia, Dec., pp.525-528.
    7.Bao, C., Sas, P. and Van Bressel, H. (1992). “A novel filtered-x LMS algorithm and its application to the active control of sound”, Proc. EUSIPCO 92, Brussels, Belgium, pp.1709-1712., August.
    8.Bao, C. (1994). “Adaptive Algorithms for Active Noise Control and Their Applications”, Katholieke Universiteit Leuven.
    9.Beranek, L. L. and Work, G. A. (1949). “Sound transmission through multiple structures containing flexible blankets”, J. Acoust. Soc. Am., Vol.21, pp.419-428.
    10.Bershad, N. and Machi, O. (1989). “Comparison of RLS and LMS algorithms for tracking a chirped signal,” Proceedings of the Institute of Electrical and Electronics Engineerings International Conference on Acoustic, Speech and Signal Processing 2, pp.896-899.
    11.Borchers, I. U. et al. (1992). “Advanced study for active noise control in aircraft”, Proc. DGLR/AIAA 14th Aeroacoustics Conf., Aachen, Germany,May.
    12.Burgess, J. C. (1981). ”Active Adaptive Sound Control in a Duct: a Computer Simulation,” J. Acoust. Soc. Am., Vol.70, pp.715-726.
    13.Chaplin, G. B, Smith, R. A. and Bearcroft, R. G. (1980). ”Active Attenuation of Recurring Vibrations,” UK Pattent 1-577-322.
    14.Clark, R. L. and Bernstein, D. S. (1998). “Hybrid Control: Separation in Design,” J. Sound Vib., V.214,N.4,pp.784-791.
    15.Clark, D.W. et al. (1987a). “Generalised predictive control — Part I: the basic algorithm,” Automatic, Vol.23(2), pp.137-148..
    16.Clark, D.W. et al. (1987b). “Generalised predictive control — Part II: extensions and interpretations,” Automatic, Vol.23(2), pp.149-160.
    17.Elliott, S. J. et al. (1987). “A multiple error LMS algorithm and its application to the active control of sound and vibration”, IEEE Tans. on ASSP, Vol.ASSP-35(10), pp.1423-1434.
    18.Elliott, S. J. et al. (1990). “In-flight experiment on the active control of propeller-induced cabin noise”, J. of Sound and Vibration, Vol.140(2), pp.219-238.
    19.Eriksson L. J. (1991). “Development of the Filtered-U Algorithm for Active Noise Control,” J. Acou. Soc. Am., Vol89, No.1, pp.257-265,Jan.
    20.Haykin, S. (1986). Adaptive Filter Theory. Prentice-Hall, Inc., Englewood Cliffs, N.J., U.S.A.
    21.Kido, K. (1975). “Reduction of Noise by Use of Additional Sound,” Proceedings of InterNoise ’75, Sendai, pp.649-650.
    22.Konyaev, S. I. And Fedoryuk, M. V. (1988). “Spherical Huygen’s surfaces and their discrete approximation”, Soviet Physics Acoustic, Vol.23, pp.373-374.
    23.Lueg, P. (1936). “Process of Silencing Sound Oscillations,” U.S. Patent 2,043,416,June 19.
    24.Miyoshi, M. and Kaneda, Y. (1988). “Active Noise Control in a Reverberant Three-Dimen-sional Sound-field,” Proceedings Inter-Noise, pp.983-986.
    25.Marari, M. and Zafirou, E. (1989). Robust Process Control, Prentice-Hall, Englewood Cliffs, NJ.
    26.Nelson, P. A. and Elliot, S. J. (1992). Active Control of sound, Academic Press, London.
    27.Olson, H. F. and May, E. G. (1953) “Electronic sound Absorber,” Journal of the Acoustic Society of America,Vol.25, No.6, pp.1130-1136.
    28.Ross, C. F. (1981). ”A Demonstration of Active Control of Broadband Sound,” Journal of Sound and Vibration Vol.74, pp.411-417.
    29.Thornton M. H. (1988). “Active power minimization in the free field using a finite number of error sensor”, B. Eng. Honours Dissertaion, University of Southampton, England.
    30.Tobey, G. E. et al. (1971). Operation Amplifiers — Design and Applications, McGraw Hill, New York. pp.429.
    31.Tokhi, M. O. and Leitch, R. R. (1991). ”Design of Active Noise Control Systems Operating in Three Dimensional Non-Dispersive Propagation Medium,” Noise Control Engineering Journal, Vol.36, pp.41-53.
    32.Tsao, T. C. (1994). “Optimal Feed-forward Digital Tracking Controller Design,” ASME J. Dynamic System, Measurement and Control, Vol.2, No.6, pp.583-592.
    33.Widrow, B et al. (1975). “Adaptive Noise Canceling: Principles and Application,” Proc. IEEE, Vol.63, NO.12, pp.1692-1716.
    34.Widrow, B. and Stearns, S. D. (1985). Adaptive Signal Processing, Prentice-Hall.

    QR CODE
    :::