論文是以快速吹製成型(Quick Plastic Forming, QPF)製作5083鋁合金及超塑性5083鋁合金製作金屬手機外殼進行研究探討，實驗研究討論以最快時間吹製不同厚度AA5083鈑材，並比較AA5083及SPF5083兩種材料的差異，以微觀結構方面來觀察及討論AA5083一般晶粒及SPF5083細晶材料討論原材料及加工後材料的差異性，在以各種不同機械性質及成型的厚薄均勻度、尺寸大小結果來探討及評估最快及最有效率的吹製時間。實驗主要分成三個部分，第一部分是討論AA5083鋁合金0.8mm鈑片、第二部分是討論AA5083鋁合金金屬鈑片0.6mm鈑片、第三部分是討論AA5083及SPF5083鋁合金0.9mm鋁合金金屬鈑片並整合各部分時間對於尺寸與厚薄均勻度的影響。

The paper is based on Quick Plastic Forming (QPF), which is made of 5083 aluminum alloy and superplastic 5083 aluminum alloy to make metal mobile phone casing. The experimental research discusses the fastest time to blow different thickness AA5083 coffins and compare them. The differences between AA5083 and SPF5083 materials are observed and discussed in terms of microstructure. The differences between AA5083 general grain and SPF5083 fine-grained materials are discussed. The thickness and uniformity of the raw materials and processed materials are discussed in various mechanical properties. Size results to explore and evaluate the fastest and most efficient blowing time. The experiment is mainly divided into three parts, the first part is to discuss AA5083 aluminum alloy 0.8mm material, the second part is to discuss AA5083 aluminum alloy metal material 0.6mm material, the third part is to discuss AA5083 and SPF5083 aluminum alloy 0.9mm aluminum alloy metal material and integrate The effect of each part time on size and thickness uniformity.

[1]F. Yang & W. Yang, “Kinetics and size effect of grain rotations in nanocrystals with rounded triple junctions”, Scripta Materialia, Vol 61, pp.919-922, 2009.
[2]C. M. Hu, C. M. Lai, P. W. Kao, N. J. Ho, J. C. Huang, “Quantitative measurements of small scaled grain sliding in ultra-fine grained Al–Zn alloys produced by friction stir processing”, Materials Characterization, Vol 61, pp.1043-1053, 2010.
[3]Alan I. Taub, Paul E. Krajewski, Alan A. Luo, John N. Owens, "The Evolution of Technology for Materials Processing over the Last 50 Years: The Automotive Example", JOM, Vol 59, 2, pp.48–57, 2007.
[4]L.D. Hefti, “Commercial Airplane Applications of Superplastically Formed AA5083 Aluminum Sheet”, Journal of Materials Engineering and Performance, Vol 16, pp.136-141, 2007.
[5]P. E. Krajewski, J. G. Schroth, “Overview of Quick Plastic Forming Technology”, Materials Science Forum, Vol 551-552, pp.3-12, 2007.
[6]R. Boissiere, S. Terzi, J. J. Blandin, L. Salvo, “Quick-Plastic forming: similarities and differences with Super-Plastic forming”, 6th EUROSPF Conference, pp.1-2, 2009.
[7]J. Carpenter and M. T. Smith, “Quick Plastic Forming of Aluminum Sheet Metal”, Energy Efficiency and Renewable Energy, 2005.
[8]Mary Anne Kulas, Paul E. Krajewski, John R. Bradley, Eric M. Taleff, "Forming Limit Diagrams for AA5083 under SPF and QPF Conditions", Materials Science Forum, Vol 551-552, pp.129-134, 2007
[9]Moinuddin Sirdar Rashid, Chongmin Kim, Edward Frank Ryntz, Frederick Irvin Saunders, Ravi Verma, Sooho Kim, "Quick plastic forming of aluminum alloy sheet metal", U. S. Patent, No. 6253588 B1, 2001.
[10]Richard Murray Kleber, Nelson T. Brinas, Dana W. Moore, Donald L. Kenyon, Joseph B. Harris, "Panel extraction assist for superplastic and quick plastic forming equipment ", U. S. Patent, No. 6615631 B2, 2003.
[11]Arianna T. Morales, "Coating for superplastic and quick plastic forming tool and process of using", U. S. Patent, No. 6655181 B2, 2003.
[12]Chongmin Kim, Gary A. Kruger, "High throughput quick-plastic-forming ", U. S. Patent, No. 7028519 B2, 2006.
[13]Richard H. Hammar, Gary A. Kruger, James G. Schroth, Edward W. 54 Bennett, Curtis L. Shinabarker, "Hot die cleaning system for quick plastic forming cell", U. S. Patent, No. 7204110 B2, 2007.
[14]Sydney Coleman, Bruce Goodreau, "Lubricant for quick plastic forming of aluminum sheet", U. S. Patent, No. 0262120 A1, 2007.
[15]Gary A. Kruger, Chongmin Kim, Richard H. Hammar, "Method for vaccum assisted preforming of superplastically or quick plastically formed article", U. S. Patent, No. 7363790 B2, 2008.
[16]Richard H. Hammar, Richard M. Kleber, Gary A. Kruger, "Open press thermal gap for QPF forming tools", U. S. Patent, No. 7823430 B2, 2010.
[17]Moinuddin S. Rashid, Chongmin Kim, Edward F. Ryntz, Frederick I. Saunders, Ravi Verma, Sooho Kim, Paul E. Krajewski, "Quick plastic forming of aluminum alloy sheet metal", U. S. Patent, No. RE43012 E, 2011.
[18]J.W. Edington K.N. Melton and C.P. Cutler, “Superplasticity” Progress International Materials Science, Vol. 21, No.2, pp.5, (1976)
[19]A. K. Mukherjee and R. S. Mishra, “Superplasticity”, Encyclopedia of Materials: Science and Technology (Second Edition), pp.8977-8981, 2001.
[20]P. E. Krajewski and J. G. Schroth, Superplastic Forming of Advanced Metallic Materials: Methods and Applications, Woodhead Publishing Limited.,2011.
[21]J. R. Bradley, "Bulge testing of superplastic AA5083 aluminum sheet", Advances in Superplasticity and Superplastic Forming by TMS, pp.109–118, Charlotte, NC, 2004.
[22]孫稟厚,「鎂合金 AZ31 細晶薄鈑片拉伸性質與氣壓成型特性研究」,國立中央大學，博士論文，21-23 頁，民國 100 年。
[23]O.D. Sherby and J. Wadsworth: Progr. Mater. Sci., 33, 1989,p.169.
[24]O.D. Sherby, M. Burke, Prog. Mater. Sci., 13, 1966, p.323.
[25]J.W. Edington, K.N. Melton and C.P. Cutler, Prog. Mater. Sci.21, 1976, p. 67.
[26]J.W. Edington, K.N. Melton and C.P. Cutler, “Progress In Mat Sci.”, Vol.21, No2, 1976, p.61.
[27]SJ Hosseinipour, "An investigation into hot deformation of aluminum alloy 5083", Volume 30, Issue 2, February 2009, Pages 319-322.