摘要
本文應用MARC有限元素套裝軟體分析軸對稱液靜壓引伸加工問題。為瞭解MARC應用於液靜壓引伸問題的預測性及妥適性，本文首先利用液靜壓引伸的實驗及另一理論結果比較模擬的準確性，並分別探討衝頭圓角半徑、摩擦應力及液壓力歷程等製造參數對成品厚度及成形所需之衝頭負載。其中，配合不同液壓歷程條件以模擬圓杯最終之外形，並利用標準差的方式針對圓杯杯底及圓角處的厚度均勻性來判斷加工條件（即液壓力大小、歷程）是否良窳之標準。

Abstract
This paper is to analyze nonlinear hydromechanical deep drawing process and circular blank of rigid-plastic material. The Cosserat theory and experiment are proved by using the MARC. The objective of this research is to find out the important factors which influence the final blank thickness and punch force. The parameter includes punch radius, friction coefficient and pressure process. The standard deviation is to determine what parameter will affect the final blank thickness evenly.

參考文獻
[1] N.M. Wang and S.C. Tang, “Analysis of Bending Effects in Sheet Forming Operations”, Int. J. for Num. Meth. in Engng., Vol.25, pp253~267, 1998.
[2] H.B. Shim and D.Y. Yang, “Elastic-Plastic Finite Element Analysis of Deep Drawing Process by Membrane and Shell Elements”, Journal of Manufacturing Science and Engineering, Vol.119,pp.341-349,1997.
[3] Tetsuo Naka and Fusahito Yoshida, “Deep drawability of type 5083 aluminium-magnesium alloy sheet under various conditions of temperature and forming speed”, Journal of Materials Processing Technology v.89 n.1 pt.0 pp.19-23, 1999.
[4] T. H. Choi and H. Huh, “Sheet metal forming analysis of planar anisotropic materials by a modified membrane finite element method with bending effect”, Journal of Materials Processing Technology v.89 n.1 pt.0 pp.58-64, 1999.
[5] H. Takuda, T. Yoshii, N. Hatta, “Finite-element analysis of formability of a magnesium-based alloy AZ31 sheet”, Journal of Materials Processing Technology, Vol 89-90, pp.135-140, 1999.
[6] S.H. Zhang, M.R. Jensen, J. Danckert, K.B. Nielsen, D.C. Kang, L.H. Lang, “Analysis of the hydromechanical deep drawing of cylindrical cups”, Journal of Materials Processing Technology, Vol 103, pp.367-373, 2000.
[7] Anwar Kandil, “An experimental study of hydroforming deep drawing”, Journal of Materials Processing Technology, Vol 134, pp.70-80, 2003.
[8] Shi-Hong Zhang, Li-Xin Zhou, Zhong-Tang Wang, Yi Xu, “Technology of sheet hydroforming with a movable female die”, International Journal of Machine Tools & Manufacture, Vol 43, pp.781-785, 2003.
[9] Fuh-Kuo Chen, Tyng-Bin Huang, Chih-Kun Chang, “Deep drawing of square cups with magnesium alloy AZ31 sheets”, International Journal of Machine Tools & Manufacture, Vol 43, pp.1553-1559, 2003.
[10] Lihui Lang, Joachim Danckert, Karl Brian Nielsen, “Study on hydromechanical deep drawing with uniform pressure onto the blank”, International Journal of Machine Tools & Manufacture, Vol 44, pp.495-502, 2004.
[11] Kang Dachang, Chen Yu, Xu Yongchao, “Hydromechanical deep drawing of superalloy cups”, Journal of Materials Processing Technology, Vol 166, pp.243-246, 2005.
[12] Lihui Lang, Joachim Danckert, Karl Brian Nielsen, “Investigation into hydrodynamic deep drawing assisted by radial pressure PartⅡ. Numerical analysis of the drawing mechanism and the process parameters”, Journal of Materials Processing Technology, Vol 166, pp.150-161, 2005.
[13] H.D. Hibbitt, P.V. Marcal and J.R. Rice, “A Finite Element Formulation for problems of large strain and large displacement”, Int. J. Soilds Struct., Vol 6 pp.1069-1086, 1970.
[14] R.M. Mcmeeking and J.R. Rice, “Finite Element Formulation for Problem of Large elastic-plastic deformation”, Int. J. Soilds Struct. , Vol 11, pp.601-616, 1975.
[15] “Theory and user information”, MARC Analysis Research Corporation. Volume A. Version K7.
[16] A.Peled, M.B. Rubin, J. Tirosh, “Analysis of blank thickening in deep drawing processes using the theory of a Cosserat generalized membrane”, Journal of the Mechanics and Physics of Solids, Vol 52, pp.317-340, 2004.
[17] 白賜清, “品質管制之統計分法”, 中華民國品質管制學會發行, 1981.
[18] 楊文龍, “軸對稱引伸加工問題之有限元素分析”, 碩士論文, 國立中央大學機械工程研究所, 2002.