簡易檢索 / 詳目顯示
| 研究生： |
喬執中 Chin-Chung Chiao |
|---|---|
| 論文名稱： |
力量控制於機械手臂運動之應用 Application of Force Control on a Robot |
| 指導教授： |
董必正
Pi-Cheng Tung |
| 口試委員: | |
| 學位類別： |
碩士 Master |
| 系所名稱： |
工學院 - 機械工程學系 Department of Mechanical Engineering |
| 畢業學年度： | 89 |
| 語文別： | 中文 |
| 論文頁數： | 51 |
| 中文關鍵詞： | 複合控制 、順應控制 、模糊控制 、比例-積分-微分控制 、機械臂 |
| 外文關鍵詞： | Hybrid control, Compliant motion, Fuzzy control |
| 相關次數： | 點閱：10 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
Recent years, the application of robot is extensive. In order to recognize the relative position between robot and workpiece, CCD (change couple device) is applied to get the image information to orientate, but it is restricted by environment, and it’s not easy to apply extensively. In order to substitute CCD to measure the shape and position, we use a five-axis robot with a force sensor to do the contact measurement. Using the complaint motion controller, the end-effector with force sensor, which can detect the boundary of workpiece smoothly. And using the algorithm of Fuzzy applies in compliant motion, depending on this method improves the compliant control, when robot looks for the boundary of workpiece, it will be very fast and accuracy to look for the boundary of workpiece. In addition, depending on continuous experiments verify the practicability of compliant control algorithm by this thesis.
[1] C. Perrier, L. Cellier, P. Dauchez,“Experimental comparison of hybrid and external control structures for a mobile manipulator,”Robotics and Automation Proceedings, IEEE International Conference, Vol. 4, pp. 3577-3582(1997).
[2] Di Xiao, B. K. Ghosh, Ning Xi, T. J. Tarn, “Sensor-based hybrid position/force control of a robot manipulator in an uncalibrated environment,”Control Systems Technology, IEEE Transactions, Vol. 8, Issue: 4, pp. 635-645, July, (2000).
[3] Feng-Yi Hsu, Li-Chen Fu, “Intelligent robot deburring using adaptive fuzzy hybrid position/force control,”Robotics and Automation, IEEE Transactions, Vol. 16, Issue: 4, pp. 325 -335 Aug, (2000).
[4] H. Kazerooni,“Fundamentals of robust compliant motion control,”IEEE Journal of Robotics Automation, Vol. RA-2, June, (1986).
[5] J. J. Craig,“Introduction to robotics: mechanics and control,”Second Edition, Addison-Wesley Publishing Company, 1989.
[6] Jin-Soo Kim, K. Suzuki, M. Yamano, M. Uchiyama,“ Vibration suppression control of constrained spatial flexible manipulators,”Robotics and Automation Proceedings, IEEE International Conference, Vol. 4, pp. 2831-2837(1997).
[7] M. H. Raibert and J. J. Craig,“Hybrid position/force control of manipulators,”ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 102, pp. 126-133(1981).
[8] N. Hogan,“Impedance control: An approach to manipulation: Part1-theory, Part2-Implementation, Part3-Application,”Journal of Dynamic Systems, Measurement, and Control, Vol. 107, pp. 1-24(1985).
[9] P. B. Goldsanith,“Stability of robot force control applied to unilateral constraints,”Electrical and Computer Engineering, Canadian Conference, Vol. 2, pp. 498-501 (1996).
[10] R. J. Schilling,“Fundamentals of robotics: analysis and control,”Prentice-Hall, Inc., 1990.
[11] R. Kumar, P. Berkelman, P. Gupta, A. Barnes, P. S. Jensen, L. L. Whitcomb, R. H. Taylor, “Preliminary experiments in cooperative human/robot force control for robot assisted microsurgical manipulation,” Robotics and Automation Proceedings. IEEE International Conference, Vol. 1, pp. 610-617(2000).
[12] Yong Cui, N. Sarkar, “ A unified force control approach to autonomous underwater manipulation,”Robotics and Automation Proceedings, IEEE International Conference, Vol. 2, pp. 1263-1268(2000).
[13] 王文俊 編著, 認識Fuzzy, 全華科技圖書, 1997.
[14] 卓聖鵬 編譯, 機器人控制, 全華科技圖書, 2000.
[15] 羅凱, 力量控制接觸掃描是三次元量測之研究, 國立中央大學機械所碩士論文, 1994.
