本研究主要目的為設計一新型式的蒸發/冷凝熱交換器，以供未來固體吸附式製冷系統使用；並在熱交換器的鰭片上做微溝槽結構產生表面張力來達到熱傳增強之效果。本實驗係測試兩種不同熱交換器，分別為平板鰭片與微溝槽鰭片熱交換器來作比較，實驗結果發現有微溝槽結構之熱交換器能達到較好的凝結熱傳性能，並證實了表面張力在凝結時之熱傳增強的效果。
此外，由於固體吸附式製冷系統運作時處於低壓的狀態，故本實驗亦研究在不同飽和溫(壓)下時，其凝結熱傳係數所受之影響，發現熱傳係數會隨著凝結飽和溫的下降而降低。

The main purpose of this research is to design a new kind of evaporator/condenser heat exchanger, which is applied to an integrated, one-bed, closed-type adsorption air conditioning system. The micro-fin were manufactured on this heat exchanger to bring the surface tension in order to heat transfer enhanced. This research will test two kinds of different heat exchangers, one is with micro-fins and another is plain-fins. In compare of the experiment results of these two heat exchangers, we found that evaporator/condenser heat exchanger with micro-fin have higher heat transfer performance. This result proved that the surface tension can increase heat transfer.
Besides, this research also experimented on different condense temperature. We found that with the decrease in condense temperature, the heat transfer coefficient would also decrease.

參考文獻
Boubakri, 2003,“A new conception of an adsorptive solar-powered ice maker,” Renewable Energy, Vol. 28, pp. 831-842.
Boubakri, 2006,“Performance of an adsorptive solar ice maker perating with a single double function heat exchanger,” Renewable Energy, Vol. 31, pp. 799-1812.
Chamra, L. M., and Webb, R. L., 1996,“Aavanced micro-fin tubes for
Condensation,” Int. J. Heat Mass Transfer, Vol. 39, pp. 1839-1846.
Chang, W.-S., and Wang, C.-C., and Shieh C.-C., 2005,“Experimental
study of a solid adsorption cooling system using flat-tube heat
exchangers as adsorption bed,” Applied Thermal Engineering, Vol.
27, pp. 2195-2199.
Chua, H. T., and Ng, K. C., and Malek, A., and Kashiwagi, T., and
Akisawa, A., and Saha, B. B., 1999,“Modeling the performance of
two-bed, sillica gel-water adsorption chillers,” International Journal
of Refrigeration, Vol. 22, pp. 194-204.
Gartler, G., and Dagmar, J., and Purkarthofer, G., and Wagner, W., 2004,
“Development of a High Energy Density Sorption Storage System,”
Proceeding of the Eurosun Conference, Freiburg, Germany.
Kim, N.-H., and Cho, J.-P., and Kim, J.-O., and Youn, B., 2003,
“Condensation heat transfer of R-22 and R410-A in flat aluminum
multi-channel tubes with or without micro-fins,” International
Journal of Refrigeration, Vol. 26, pp. 830-839.
Nualboonrueng, T., and Kaewon, J., and Wongwises, S., 2003,
“Two-phase condensation heat transfer coefficients of HCF-134a at
high mass flux in smooth and micro-fin tubes,” Int. Comm. Heat
Mass Transfer, Vol. 30, pp. 577-590.
Oertel, K., and Fischer, M., 1998,“Adsorption cooling system for cold
storage using methanol/silicage,” Applied Thermal Engineering,
Vol. 18, pp. 773-786.
Saha, B. B., and Koyama, S., and Kashiwagi, T., and Akisawa, A., and
Ng, K. C., and Chua, H. T., 2003,“Waste heat driven dual-mode,
multi-stage, multi-bed regenerative adsorption system,” International
Journal of Refrigeration, Vol. 26, pp. 749-757.
Yang, C.-Y., and Webb, R. L., 1996,“Condensation of R-12 in small
hydraulic diameter extruded aluminum tubes with and without
micro-fins,” Int. J. Heat Mass Transfer, Vol 39, pp. 791-800.
Yang, C.-Y., and Fan, C.-F., and Chang F.-P., 2002,“Effect of Fin Tip
Radius for Film Condensationon Micro-Fin Surfaces,” Journal of
Enhanced Heat Transfer, Vol. 10, pp. 199-209.
Yasuo, Y., and Masao, M., and Kenzo, O., 1987,”Adsorption Heat Pipe
And Adsorption Refrigeration Machine Using This Adsorption Heat
Pipe,” Patent No.: JP 01-054181.
Yauso, Y., and Toshiya, O.,and Shinichi, O., 1989,”Adsorption Type Heat
Storage Device And Adsorption Type Heat Storage System With The
Same Device,” Patent No.: JP 03-091660.
王智正，2005，太陽能置冷系統發展，國科會期中報告，pp. 31-38。
鄭喬鴻，2005，微鰭管應用於吸附空調系統蒸發/冷凝器之性能實驗
探討，國立台北科技大學冷凍空調工程系碩士學位論文，台北。