[1].F. S. Hsu & K. S. Wang, “Algorithm for Evaluation of Second Moment Reliability Index,” Journal of the CSME, Vol.11, No.2, pp.185-191, 1990.
[2].K. S. Wang & F. S. Hsu, “Optimal Selection of Standard Deviation of Design Variables Based on Reliability Requirement,” Reliability Engineering and System Safety, Vol.33, pp.177-188, 1991.
[3].許芳勳，”可靠度設計應用於標準差選取之最佳化研究”，國立中央大學碩士論文，1990.
[4].黃舉錐，”非等強度分負荷系統負載調整方案之研究”， 國立中央大學博士論文，1998.
[5].蔡有藤，”系統預防維護作業之研究” ， 國立中央大學博士論文，1999.
[6].L. J. Bain, “Analysis of linear failure rate life testing distributions,” Technometrics, 16, pp.551-560, 1974.
[7].M. L. Shooman, “Probabilistic Reliability: An Engineering Approach,” McGraw-Hill, Inc., 1968.
[8].D. P. Gaver & M. Acar, “Analytical hazard representation for use in reliability, mortality and simulation studies,” Communications in Statistics-Simulation and Computation, B8(2), pp.91-111, 1979.
[9].J. F. Lawless, “Statistical Models and Methods for Lifetime Data,” JOHN WILEY & SONS, Inc., 1982.
[10].L. R. Jaisingh, W. J. Kolarik, and D. K. Dey, “A Flexible Bathtub Hazard Model for Non-repairable Systems with Uncensored Data,” Microelectronic Reliability, Vol. 27, No. 1, pp.87-103, 1987.
[11].U. Hjorth, “A Reliability Distribution With Increasing, Decreasing, Constant and Bathtub-Shaped Failure Rates, ” Technometrics, Vol. 22, No. 1, pp.99-107, Feb. 1980.
[12].R. M. Smith and L. J. Bain, “An Exponential Power Life-testing Distribution,” Communications in Statistics, Vol. 4, No. 5, pp.469-481, 1975.
[13].B. S. Dhillon, “Life Distributions,” IEEE Transactions on Reliability, Vol. R-30, pp.457-459, 1981.
[14].E. Haupt and H. Schäbe, “A new Model for a Lifetime Distribution with Bathtub Shaped Failure Rate,” Microelectronic Reliability, Vol. 32, No. 5, pp.633-639, 1992.
[15].H. Schäbe, “Constructing Lifetime Distributions with Bathtub Shaped Failure Rate from DFR Distributions,” Microelectronic Reliability, Vol. 34, No. 9, pp.1501-1508, 1994.
[16].T. W. Calvin, “Modeling the Bathtub Curve,” Proceedings of Annual Reliability and Maintainability Symposium, 1973.
[17].M. Xie & C. D. Lai, “Reliability analysis using an additive Weibull model with bathtub-shaped failure rate function,” Reliability Engineering and System Safety, Vol.52, pp.87-93, 1996.
[18].林冠甫，”新產品動態可靠度的預估”， 國立中央大學碩士論文，1991.
[19].K. S. Wang, E. H. Wan & W. G. Yang, “A preliminary investigation of new mechanical product development based on reliability theory,” Reliability Engineering and System Safety, Vol.40, pp.187-194, 1993.
[20].許金竹，”預防更換對機械系統動態可靠度影響之研究” ， 國立中央大學碩士論文，1993.
[21].王培戎，”機電系統失效與動態可靠度之研究” ， 國立中央大學碩士論文，1993.
[22].K. S. Wang, E. H. Wan, “Reliability Consideration of Flexible Manufacturing System from Fuzzy Information,” International Journal of Quality and Reliability Management, Vol.10, pp.187-194, 1993.
[23].萬英豪，”彈性製造系統可靠度在模糊資訊中之預測及改進研究” ， 國立中央大學博士論文，1993.
[24].楊萬騏，”機件硬化層動態可靠度退化模式之探討”， 國立中央大學碩士論文，1993.
[25].K. S. Wang, C. S. Chen & J. J. Huang, “Dynamic Reliability Behavior for Sliding Wear of Carburized steel,” Reliability Engineering and System Safety, Vol.58, pp.31-41, 1997.
[26].K. S. Wang, S. T. Chang & Y. C. Shen, “Dynamic Reliability Models for Fatigue Crack Growth Problem,” Engineering Fracture Mechanics, Vol.54, No.4, pp.543-556, 1996.
[27].K. S. Wang, H. J. Po, “The Relationship Between Life and Value of Machine Based on Thermodynamics Analogy,” The Chinese Journal of Mechanics, Vol.12, No.4, pp.503-512, 1996.
[28].王國雄，”系統演變與力學分析架構的類比”，第二十屆全國力學會議論文集(邀請演講)，台灣台北，Ⅷ-XV，1997.
[29].王碩銘，”潛變－破裂動態可靠度退化模式之探討”， 國立中央大學碩士論文，1994.
[30].王國雄、沈盈志、陳穎佳、陳挹民，”以 S-N 曲線探討機件疲勞可靠度之退化模式“，中華民國力學學刊，第12卷，第4期，pp.525-534，1996.
[31].K. S. Wang, Y. C. Shen and J. J. Huang, "Loading Adjustment for Fatigue Problem Based on Reliability Consideration", International Journal of Fatigue, Vol.19, No.10, pp.693-702, 1997.
[32].王國雄、沈盈志、許芳勳， ”具平均應力金屬疲勞壽限預估模式之探討"，中華民國力學期刊，第13卷，第3期，pp.245-254，1997.
[33].沈盈志， ”金屬材料疲勞累積效應與可靠度關係之探討”， 國立中央大學博士論文，1997.
[34].林維新， ”車削精度與刀具磨耗可靠度研究”， 國立中央大學博士論文，1999.
[35].K. S. Wang, W. S. Lin., and F. S. Hsu, “A new Approach for determing the Reliability of Cutting Tool,” International Journal of Advanced Manufacturing Technology, Vol.17, No.10, pp.705-709, 2001.
[36].林江龍，”放電加工電極消耗可靠度與製程參數最佳化研究”， 國立中央大學博士論文，1999.
[37].張豪麟，”系統動態可靠度與其失效率關係的探討”，國立中央大學碩士論文，1999.
[38].王國雄、許芳勳、張豪麟，”系統損傷累積與可靠度關係的探討”， 中華民國力學期刊, 第16卷，第2期，pp.131-139，2000.
[39].廖健隆，”碳鋼材料在二氧化硫環境下之腐蝕可靠度行為之探討”， 國立中央大學碩士論文，2000.
[40].K. S. Wang, F. S. Hsu & P. P. Liu, “Modeling the Bathtub Shape Hazard Rate Function in Terms of Reliability,” submitted to Reliability Engineering and System Safety, 2000.
[41].Leah Edelstein-Keshet, “Mathematical Models in Biology,” Random House, Inc., New York, 1988.
[42].K. S. Wang, J. J. Huang and Y. F. Lee, “Alternative Selection for Mechanical Design Based on Manufacturability Assessment — The Application of IERA and Grey Analysis,” Journal of The Chinese Fuzzy Systems Association, Vol.4, No.2, pp.15-27, 1998.
[43].K. C. Kapur and L. R. Lamberson, “Reliability in Engineering Design,” Jone Wiley & Sons, Inc., New York, 1977.
[44].王秉剛，”汽車可靠性工程方法”，機械工業出版社，北京，1991.
[45].E. A. Elsayed, “Reliability Engineering,” Addison Welsley Longman, Inc., Massachusetts, p.36, 1996.
[46].B. Gèniaux, “ESS at final assembly level actual result —optimization method,” The Journal of Environmental Science, Vol.31, No.1, 1988.
[47].S. S. Rao, “Reliability-Based Design,” McGraw-Hill, Inc., New York, p.155, 1992.
[48].K. S. Wang, J. J. Huang, Y. T. Tsai, F. S. Hsu, “Study of loading policies for unequal strength shared-load system”, Reliability Engineering And System Safety, Vol. 67, pp. 119-128, February 2000.
[49].ISO, “Tool life testing with single-point turning tools,” 5th draft proposal, ISO/TC29/WG22 (Secretariat 37) 91, March 1972.
[50].J. N. Yang, “Residual Strength Degradation Model and Theory of Periodic Proof Tests for Graphite/Epoxy Laminates,” Journal of Composite Materials, Vol.11, pp.176-203, 1977.
[51].P. C. Chou and R. Croman, “Residual Strength in Fatigue Based on the Strength-Life Equal Rank Assumption,” Journal of Composite Materials, Vol.12, pp.177-194, 1978.
[52].T. Tanimoto and H. Ishikawa, “Statistical Characterization of Residual Strength Degradation for Laminated GRP Materials Under Various Cyclic Loading Conditions,” Proceedings of the 4th International Conference on Structural Safety and Reliability, Vol. I, P.415-424, 1985.
[53].凌樹森, ”可靠性在機械強度設計和壽命估計中的應用,” 宇航出版社, 北京, 1988.
[54].H. T. Hahn and R. Y. Kim, “Proof testing of Composite Materials,” Journal of Composite Materials, Vol.9, pp.297-311, 1975.
[55].J. N. Yang, “Fatigue and Residual Strength Degradation for Graphite/Epoxy Composites Under Tension-Compression Cyclic Loadings,” Journal of Composite Materials, Vol.12, pp.19-39, 1978.
[56].J. C. Halpin, K. L. Jerina, and T. A. Johnson, “Characterization of Composites for the Purpose of Reliability Evaluation,” Analysis of Test Methods for High Modulus Fibers and Composites, ASTM STP 521, American Society for Testing and Materials, pp.5-64, 1973.
[57].G. P. Sendeckyj, "Fitting Models to Composite Materials Fatigue Data", Test Methods and Design Allowables for Fibrous composites. ASTM STP 734, C. C. Chamis, Ed., American Society for Testing and Materials, pp.245-260, 1981.
[58].J. N. Siddall, “Probabilistic Engineering Design Principles and Applications,” Marcel Dekker, Inc., New York, 1983.
[59].梁伯任，”材料強度退化與累積損傷之探討”， 國立中央大學碩士論文，2000.
[60].石逸群，”累積失效與可靠度關係之探討”， 國立中央大學碩士論文，2000.
[61].王國雄，”從妥善率觀點架構系統操作管理及同步工程作業”，國科會專題研究計畫書，1999.
[62].J. L. Coetzee, “The role of NHPP model in the practical analysis of maintenance failure data,” Reliability Engineering and System Safety, Vol.56, pp.161-168, 1997.
[63].S. Martorell, A. Sanchez, V. Serradell, “Age-dependent reliability model considering effects of maintenance and working conditions,” Reliability Engineering and System Safety, Vol.64, pp.19-31, 1999.
[64].D. J. Davis, “An analysis of some failure data,” Journal of the American Statistical Association, Vol.47, pp.113-150, 1952.
[65].T. Terano, K. Asai, M. Sugeno, “Fuzzy Systems Theory and its Applications,” Academic Press, Inc., CA, 1987.
[66].M. M. Bourke, D. G. Fisher, “Calculation and application of a minimum fuzzy relational matrix,” Fuzzy Sets and Systems, 74 (1995) 225-236.
[67].區奕勤，張先迪，”模糊數學原理及應用”，儒林圖書公司，1991.
[68].K. Arnold & M. M. Gupt, “Introduction to fuzzy arithmetic theory and applications,” Van Nostrand Reinhold Co., New York, 1991.
[69].P Paris and F. Erdogan, “A Critical Analysis of Crack Propagation Laws,” Journal of Basic Engineering Transactions ASME, Series D, V.58, No.4, pp.528-534, 1963.