跳到主要內容

簡易檢索 / 詳目顯示

回結果列表
研究生： 呂仕勛
Shih-Hsun Lu
論文名稱： 車用行動通訊多頻組合式天線之研製
Design and fabrication of multiband antennas for vehicular wireless communication
指導教授： 陳念偉
nan-wei Chen
口試委員:
學位類別： 碩士
Master
系所名稱： 資訊電機學院 - 電機工程學系
Department of Electrical Engineering
畢業學年度： 94
語文別： 中文
論文頁數： 84
中文關鍵詞： planar inverted F antenna 、車用天線
外文關鍵詞： planar inverted F antenna, car antenna
相關次數： 點閱：10  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本論文主要研究車用行動通訊天線，包括傳統的車用FM單偶極天線與車用無線通訊平面倒F天線(planar inverted-F antennas，PIFAs)，並了解車體結構對天線輻射場型所造成之影響。基於現有量測設備考量，論文中採用電性尺度(electrical dimension)相同之縮小車體模型及天線進行相關研究。首先透過操作在FM頻帶之車用四分之ㄧ波長單偶極天線，研究天線與車頂夾角及天線放置位置對輻射場型造成的影響。接下來基於汽車整體美觀與流線性之考量，研製一低姿態(low profile)雙頻PIFA，並分析車體對該天線輻射場型所造成之影響。此外，利用兩個雙頻PIFA，研製可四頻操作之組合式PIFA天線，此種設計可提供設計人員較高的自由度。最後透過coupled-line 180° hybrid coupler，改良原本四頻組合式PIFA天線雙埠饋入之方式，達成單埠饋入之目的。

    The study on two types of car antennas, including car monopole antennas for radio reception and car planar inverted-F antennas (PIFAs) for wireless communication, and the impact of the car body on their radiation characteristics are presented in this thesis. For measurement facility consideration, the interaction between the antennas and car are analyzed and measured using the models of equivalent electrical dimensions. In this thesis, the impact of the car body on the performance of a car monopole antenna is studied first. To be more specific, the antenna parameters associated with the antenna location and the angle between the antenna axis and the car roof are systematically analyzed. Next, a low profile dual-band PIFA is proposed, and its radiation characteristics on a car roof is presented. Also, a quad-band combination PIFA consisting of two dual-band PIFAs are demonstrated. Finally, the change of feeding structure of the quad-band PIFA via a coupled-line 180° hybrid coupler is presented.

    摘要............................................................................i 致謝..........................................................................iii 目錄..........................................................................iv 圖目錄.........................................................................v 表目錄.........................................................................xi 第一章 緒論 1 1.1 研究動機與目的.............................................................. 1 1.2 論文提要.................................................................... 4 第二章 車用天線模擬與量測方法 5 2.1 等效車體模型................................................................ 5 2.2 車用天線模擬方法............................................................ 6 2.3 車用天線量測方法............................................................ 9 第三章 車用單偶極天線 10 3.1 天線原理與設計............................................................. 10 3.2 車體結構對天線之影響....................................................... 15 3.3 車用四分之一波長單偶極天線................................................. 15 第四章 車用平面倒F天線 32 4.1 天線原理與設計............................................................. 32 4.2 車用雙頻平面倒F天線....................................................... 38 4.3 組合式多頻平面倒F天線..................................................... 53 4.4 單埠饋入組合式多頻平面倒F天線............................................. 65 第五章 結論 81 參考文獻...................................................................... 82

    [1] J. C. Batchelor, R. J. Langley and H. Endo, “On-glass mobile antenna performance modeling,” IEE Proc. -Microw. Antennas Propag., vol. 148, no. 4, August 2001.
    [2] A. -J. Ramzi and E. K. Walton, “Numerical modeling of on-glass conformal automobile antennas,” IEEE Trans. Antennas Propag., vol. 46, no. 6, Jun.1998.
    [3] R. J. Langley and J. C. Batchelor, “Hidden antennas for vehicles,” IEE
    Electronics & Communication Engineering Journal, vol. 14, Issue 6, pp. 253~262, Dec. 2002.
    [4] Available: http://www.feko.info/mlfmm.html
    [5] L. Low and R. J. Langley, “Modelling automotive antennas,” IEEE Antennas and Propagation Society International Symposium, vol. 3, pp. 3171~3174, Jun.2004.
    [6] FEKO User’s Manual, suite 5.0, EM Software & Systems-S.A. (Pty) Ltd., Jul. 2005.
    [7] C. A. Balanis, Antenna Theory：analysis and design, 2nd ed., John Wiley and
    Sons, New York, 1997.
    [8] R. Leelaratne and R. J. Langley, “Multiband PIFA vehicle telematics antennas,” IEEE Transactions on Vehicular Technology, vol. 54, no. 2, Mar. 2005.
    [9] H. K. Lindenmeier and L. M. Reiter, “Multiple-antenna diversity for FM car radio reception,” IEEE Trans. Antennas Propag., vol. AP-25, pp. 456-459, 1987.
    [10] E. Gschendtner and W. Wiesbeck, “Ultra-broadband car antennas for communications and navigation applications,” IEEE Trans. Antennas Propag., vol. 51,pp. 2020-2027, Aug. 2003.
    [11] M. Ali, G. Yang, and H. -S. Hwang, “Design and analysis of a R-shaped dual-band planar inverted F antenna for vehicular applications,” IEEE Transactions on Vehicular Technology, vol. 53, pp. 29-37, Jan. 2004.
    [12] D. S. Filipovic and J. L. Volakis, “A flush mounted multifunctional slot aperture (combo-antenna) for automotive applications,” IEEE Trans. Antennas Propag., vol. 52, pp. 563-571, Feb.2004
    [13] G. Clasen and R. J. Langley, “Meshed patch antenna integrated into car windscreen,” Electron. Lett., vol. 36, no. 9, pp. 781-782, 2000.
    [14] K. L. Wong, “Planar Antennas for Wireless Communications,” John Wiley and Sons, Taiwan, 2003.
    [15] Y. X. Guo and H. S. Tan, “New compact six-band internal antenna,” IEEE Antennas Wireless Propagat.Lett., vol. 3, 2004.
    [16] D. Nashhat, H. Elsadek, and H. Ghali, “Single feed compact Quad-Band PIFA antenna for wireless communication applications,” IEEE Trans. Antennas Propag., vol. 53, no. 8, Aug. 2005.
    [17] P. Salonen, M. Keskilammi, and M. Kivikoski, “New slot configurations for dual-band planar inverted-F antenna,” Microwave and Optical Technology Letters, vol. 28, no. 5, Mar. 2001.
    [18] Z. D. Liu and P. S. Hall, “Dual-frequency planar inverted-F antenna,” IEEE Trans. Antennas Propag., vol. 45, no. 10, pp. 1451-1457, 1997.
    [19] D. Viratelle and R. J. Langley, “Dual-band printed antenna for mobile telephone applications,” Proc. Inst. Elect. Eng Microwaves, Antennas Propag., vol. 147, no. 6, pp. 381-384, 2000.
    [20] C. R. Rowell and R. D. Murch, “A compact PIFA suitable for dual-band frequency 900/1800 MHz operation,” IEEE Trans. Antennas Propag., vol. 46, no. 7, pp. 596-598, 1998.
    [21] W. P. Dou and Y. W. M Chia, “Novel meandered planar inverted-F antenna for triple frequency operation,” Microwave and Optical Technology Letters, vol. 27, no. 1, pp. 58-60, 2001.
    [22] P. Salonen, M. Keskilammi, and M. Kivikoski, “Single-feed dual planar inverted-F antennas with U-slot,” IEEE Trans. Antennas Propag., vol. 48, no. 8, pp. 1262-1264, Aug. 2000.
    [23] A. T. Arkko, “Effect of ground plane size on the free-space performance of a mobile handset,” Nokia Mobile Phones Rep., Finland, 2002.
    [24] C. R. Rowell and R. D. Murch, “A capacitively loaded PIFA for compact mobile telephone handsets,” IEEE Trans. Antennas Propag., vol. 45, no.5, pp. 837-841, May. 1997.
    [25] K. I. Virga and Y. Rahmat-Sami, “Low profile enhanced-bandwidth PIFA antennas for wireless communication packaging,” IEEE Trans. Microwave Theory Tech., vol. 45, no. 10, pp. 1879-1888, Oct. 1997.
    [26] C. T. P. Song, P. S. Hall, H. Ghafouri-Shiraz, and D. Wake, “Triple band planar inverted F antennas for handheld devices,” Electron Lett., vol. 36, pp. 112-114, 2000.
    [27] H. T. Chen, K. L. Wong, and T. W. Chio, “PIFA with a meandered and folded patch for the dual-band mobile phone application,” IEEE Trans. Antennas Propag., vol. 51, pp. 2468-2471, Sep. 2003.
    [28] M. Ali, G. J. Hayes, H. –S. Hwang, and R. A. Sadler, “Design of a multiband internal antenna for third generation mobile phone handsets,” IEEE Trans. Antennas Propag., vol. 51, pp. 1452-1461, Jul. 2003.
    [29] I. Ang, Y. X. Guo, and M. Y. W. Chia, “Compact internal quad-band antenna for mobile phones,” Microwave and Optical Technology Letters, vol. 38, no. 3, pp. 217-233, 2003.
    [30] Y. X. Guo, M. Y. W. Chia, and Z. N. Chen, “Miniature built-in quad-band antenna for mobile handsets,” IEEE Antennas Wireless Propagat.Lett., vol. 2, pp. 30-32, Dec. 2003.
    [31] Y. X. Guo, I. Ang, and M. Y. W. Chia, “Compact internal multi-band antenna for mobile phones,” IEEE Antennas Wireless Propagat.Lett., vol. 2, pp.143-146 Dec. 2003.
    [32] R. Vanghan, “Model and results for single mode PIFA antenna,” IEEE Antennas and Propagation Society International Symposium, vol. 4, pp. 4028-4031, Jun. 2004.
    [33] D. Nashaat, H. A. Elsadek, H. Ghali, “Dual-band reduced size PIFA antenna with U-slot for Bluetooth and WLAN applications,” IEEE Antennas and Propagation Society International Symposium, vol. 2 , pp. 962~965, Jun. 2003.
    [34] R. Feick, H. Carrasco, M. Olmos and H. D. Hristov, “PIFA input bandwidth enhancement by changing feed plate silhouette, ” IEE Electronics Letters, vol. 40, No. 15, Jul. 2004.
    [35] M. -J. Park and B. Lee, “Coupled-line 180° hybrid coupler,” Microwave and Optical Technology Letters, vol. 45, No. 2, Apr. 2005.
    [36] D. M. Pozar, Microwave Engineering, 3rd ed., John Wiley and Sons, New York, 2005.

    QR CODE
    :::