| 研究生: |
游昆翰 Kun-Han Yu |
|---|---|
| 論文名稱: |
超高對比度之歐規LED車頭燈之設計與驗證 Design and Demonstration of K-mark LED Headlamp with Extreme-high Contrast |
| 指導教授: |
楊宗勳
Tsung-Hsun Yang 孫慶成 Ching-Cherng Sun |
| 口試委員: | |
| 學位類別: |
碩士 Master |
| 系所名稱: |
理學院 - 光電科學與工程學系 Department of Optics and Photonics |
| 論文出版年: | 2022 |
| 畢業學年度: | 110 |
| 語文別: | 中文 |
| 論文頁數: | 105 |
| 中文關鍵詞: | 單一光學反光杯 、K-mark 、光學設計 、超高對比度 、近光燈 |
| 相關次數: | 點閱:26 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文中,主要以通過德國自行車近燈法規 (StVZO 22A TA23,K-mark) 作為設計目標。首先,我們針對多款市售高功率車規白光LED光源來分析其光學特性,在考量其光學特性及成本後,選定最符合需求的LED光源。隨著現在車燈不段提高亮度的設計下,為了要避免眩光造成用路人的不適及對自然界所產生的光害以及增加製造時對於公差的容忍度,所以擁有高對比度的車前燈是非常重要的,但要提高對比度並不容易,因在設計及生產製造上種種因素導致對比度無法有效提升,而綜觀各家廠商販賣之腳踏車車前燈以及本設計團隊到目前為止表現最佳的設計對比度在160,而本研究最終成功的設計出超高對比度達313.4之自行車車前燈。本論文使用了不一樣設計方法,因應法規的要求將光形設計成三個亮點,且減少反光杯段面以及段面連接時所造成接面段差以減少在生產製造時因電鍍所產生的邊緣堆積,來達成高對比度的目的。
In this thesis, we aim to design a white LED headlamp to meet the German regulation of StVZO 22A TA23 (so-called K-mark). At first, compare commercial vehicle headlamps with LEDs to analyze their optical properties. To design a high-contrast low beam headlamp in a single optical reflector, we checked several high-quality power white LEDs, analyzed the optical properties, and then selected the most appropriate one based on the performance and cost consideration. With headlights getting brighter and brighter, having high-contrast headlights is very important to avoid glare causing discomfort to people and to avoid damaging nature with light pollution. But most commercial headlight contrast can't exceed 150 because of the design and the manufacturing process. Thus we used a different method than before. According to the regulation, we used three bright spots to design our light pattern and reduce the reflector segment to avoid manufacturing errors.
1. ENERMAX website 自行車種類介紹, https://bike.enermax.com/news/bicycles-info.
2. FENIX website BC25R, https://www.fenixlight.com/product/detail/index.php?id=78.
3. 維基百科 website 眩光, https://zh.wikipedia.org/wiki/%E7%9C%A9%E5%85%89.
4. Kraftfahrt-Bundesamt, “Straßenverkehrs-Zulassungs-Ordnung StVZO 22a, 2015 3rd version,” https://www.kba.de/DE/Home/ home_node.html.
5. “ECE,” http://www.unece.org/trans/main/wp29/wp29regs101-120.html.
6. 謝承諺,歐規之高對比度進遠燈設計與雜散光分析,國立中央大學碩士論文,中華民國一百一十年。
7. Supernova website M99 MINI PRO-25, https://supernova-lights.com/en/products/m99-mini-pro-25.
8. BUSCH + MÜLLER website IQ-XL, https://www.bumm.de/de/.
9. LEZYNE website POWER HB STVZO E1000, https://ride.lezyne.com/collections/led-lights-stvzo/products/ebike-super-hb-stvzo-e1000.
10. ROMIX website Z3EK PRO, https://www.roxim.net/.
11. LUPINE website SL X for S-Pedelecs, https://www.lupine-shop.com/en/SL-X-for-S-
Pedelecs/i4000-035.
12. BENEX website ET-3151-AD, https://www.lordbenex.com/front-bike-bicycle-headlight/
K-Mark-90Lux-Bike-Front-Light-By-USB-Rech-Batt-1.html.
13. 李宇翔,歐規單一光學反光鏡之高亮度近遠燈研究,國立中央大學碩士論文,中華民國一百零九年。
14. C. C. Sun, C. S. Wu, Y. S. Lin, Y. J. Lin, C. Y. Hsieh, S. K. Lin, T. H. Yang, and Y. W. Yu, “Review of optical design for vehicle forward lighting based on white LEDs,” Optical Engineering 60(9), 091501 (2021).
15. 陳觀宇,高光效多功能LED遠距離投射燈之研究,國立中央大學光電所碩士論文,中華民國一百零七年。
16. E. Hecht, Optics, 4th eds. (Addison Wesley, San Francisco, 2002).
17. V. N. Mahajan, Optical Imaging and Aberrations: Part I Ray Geometrical Optics (SPIE PRESS, Washington, 1998).
18. R. Karlicek, Handblock of Advance Lighting Technology (Springer International Publishing Switzerland, 2017).
19. C. C. Sun, T. X. Lee, Optical Design for LED Solid State Lighting – A guide (IOP Publishing Ltd, 2022).
20. CIE Publication No.015 Colorimetry 4th Edition (CIE,2018).
21. 大田登,色彩工程學:理論與應用,全華圖書股份有限公司,中華民國九十七年。
22. A. M. Colman, A Dictionary of Psychology (Oxford University Press, 2009).
23. 孫慶成,光電工程概論,全華圖書股份有限公司,中華民國一百零一年。
24. H. Ries, N. Shatz, J. Bortz, and W. Spirkl, “Performance limitations of rotationally symmetric nonimaging devices,” J. Opt. Soc. Am. A 14, 2855-2862. (1997).
25. C. C. Sun, T. X. Lee, S. H. Ma, Y. L. Lee, and S. M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region,” Opt. Lett. 31, 2193-2195 (2006).
26. W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white LEDs,” Opt. Express 15, 7572–7577 (2007).
27. C. C. Sun, W. T. Chien, I. Moreno, C. C. Hsieh, and Y. C. Lo, “ Analysis of the far-field region of LEDs,” Opt. Express 17, 13918-13927 (2009).
28. R. J. Koshel, Illumination Engineering: Design with Nonimaging Optics (Wiley, 2013).
29. BRO ASAP, http://www.breault.com/software/asap-features.
30. 臺灣監理法規檢索系統,車輛型式安全及品質一致性審驗作業要點, https://www.mvdis.gov.tw/webMvdisLaw/LawContent.aspx?LawID=B0023012.
31. C. C. Sun, C. S. Wu, C. Y. Hsieh, Y. H. Lee, S. K. Lin, T. X. Lee, T. H. Yang, and Y. W. Yu, “Single reflector design for integrated low/high beam meeting multiple regulations with light field management,” Opt. Express 29(12), 18865-18875 (2021).
32. C. C. Sun, C. S. Wu, Y. S. Lin, Y. J. Lin, C. Y. Hsieh, S. K. Lin, T. H. Yang, and Y. W. Yu, “Optical design for vehicle forward lighting based on white LEDs,” Opt. Engineering, manuscript number: 20210744SSV (2021).
33. OSRAM GmbH, https://www.osram.com/cb/.
34. Cree Inc., https://cree-led.com/.
35. 楊凱宇,高功率 LED 之歐規自行車前燈設計,國立中央大學光電所碩士論文,中華民國九十八年。
36. 馮世典,德規 LED 自行車前燈光學設計與驗證,國立中央大學光電所碩士論文,中華民國一百年。
37. 吳健君,LED 投射聚光型燈具與封裝晶粒大小之關係,國立中央大學光電所碩士論文,中華民國一百零二年。
38. 蔡直佑,高光效多功能LED投射光形之研究,國立中央大學光電所博士論文,中華民國一百零四年。
39. 蔡明修,增加高對比度LED車燈生產容忍度之光學設計研究,國立中央大學光電所博士論文,中華民國一百零七年。
40. 吳同,失效LED車頭燈的截止線光形重建之研究,國立中央大學光電所碩士論文,中華民國一百零八年。
41. T. H. Yang, H. Y. Huang, C. C. Sun, B. Glorieux, X. H. Lee, Y. W. Yu, and T. Y. Chung, “Noncontact and instant detection of phosphor temperature in phosphor-converted white LEDs,” Scientific Reports 8, 296(2018).
42. OSRAM website KW H3L.531.TE, https://www.osram.com/ecat/KW%20H3L531.TE/
com/en/class_pim_web_catalog_103489/prd_pim_device_2190829/.