瀝青混合料的生產受到限制，以節約資源和減少污染。 熱拌瀝青 (HMA) 技術在瀝青混
合料生產過程中消耗大量能源。 然而，溫拌瀝青 (WMA) 可能會通過降低混合和壓實
溫度來降低守恆能量。 長期以來，人們對將蠟作為瀝青粘合劑中的流變增強劑有很大
興趣。 Sasobit (S) 和聚乙烯 (PE) 蠟可降低粘溫並提高可加工性。 在這項研究中，來自
一家台灣公司的 S 和 PE 與 1% - 5% 的不同百分比的粘合劑一起使用。 在兩種不同速
度下進行機械混合：1000 rpm 和 2000 rpm 用於查看基於粘合劑流變特性的混合方法
的效果。 為了確定用於溫拌粘合劑的蠟添加劑的最佳百分比，進行了流變學和化學測
試。 該測試包括以下參數：針入度、延展性、軟化點、粘度、動態剪切流變儀 (DSR)、
車轍、疲勞和用於化學檢測的薄層色譜/火焰離子化檢測 (TLC-FID)。 根據流變學測試，
添加更多的蠟添加劑可以提高粘合劑的剛度，同時降低其在高溫下的粘度。 與 1000
rpm 相比，在 2000 rpm 下混合具有更大的降低，這在降低生產和混合溫度方面具有
顯著優勢。 綜合各項研究的流變性能，PE-G 的性能可與 S 相媲美。使用 3%的蠟添加
劑是台灣溫拌粘合劑的理想用量。 它能夠滿足台灣高溫路面的施工標準（PG70）。
但是，建議使用多種蠟添加劑對瀝青混凝土樣品進行測試，以獲得更好的性能解釋。

Asphalt mix production has been limited to conserve resources and reduce pollution. Hot mix
asphalt (HMA) technologies consume a significant amount of energy during asphalt mix
production. However, warm-mix asphalt (WMA) might decrease the conserved energy by
lowering the mixing and compaction temperature. There has long been a lot of interest in the
incorporation of waxes as the rheological enhancer in binders of asphalt. Sasobit (S) and
Polyethylene (PE) waxes reduce viscosity-temperature and improve workability. In this study,
S and PE from a Taiwan company were used with varying percentages of 1% - 5% by mass of
binder. While mechanical blending at two different speeds: 1000 rpm and 2000 rpm was utilized
to see the effect of the blending method based on the binder's rheological characteristics. In
order to identify the optimal percentage of wax additives for warm mix binders, rheological and
chemical tests were carried out. The test includes the following parameters: penetration,
ductility, softening point, viscosity, dynamic-shear rheometer (DSR), rutting, fatigue, and thinlayer
chromatography/flame
ionization
detection
(TLC-FID)
for
chemical
detection.
According

to

rheological testing, adding more wax additives could improve the stiffness of the binder
while lowering its viscosity at high temperatures. Mixing at 2000 rpm having a greater decrease
compared to 1000 rpm which has a significant benefit in lowering production and mixing
temperatures. Based on all the rheological performance in study research, the performance of
PE-G is comparable to S. The use of 3% wax additives is the ideal amount to utilize in Taiwan's
warm mix binder. It is able to fulfill Taiwan's construction criteria for pavements in hot
temperatures (PG70). However, it is recommended to conduct asphalt concrete samples using
several wax additives for better performance interpretation.

[1] Y. Edwards, Influence Of Waxes On Bitumen And Asphalt Concrete Mixture
Performance, Stockholm: KTH Ature And The Built Environmentrchitec, 2014.
[2] A. J. a. G. White, "“The Challenges of Warm Mix Asphalt as a Mature Technology,”,"
in Proceedings of the 9th International Conference on Maintenance and Rehabilitation
of Pavements, 2020.
[3] Goshtasp Cheraghian, Augusto Cannone Falchetto, Zhanping You, Siyu Chen, Yun Su
Kim, Jan Westerhoff, Ki Hoon Moon, Michael P. Wistuba, , "Warm mix asphalt
technology: An up to date review," Journal of Cleaner Production, vol. 268, 2020.
[4] B. Kheradmanda, R. Muniandya, L. T. Huaa & A. Soloukia, "A Laboratory Investigation
on the Rheological Properties of Aged and Unaged Organic Wax Modified Asphalt
Binders," Petroleum Science and Technology, vol. 33:7, pp. 757-764, 2015.
[5] Luca Desidery and Michele Lanotte, "Effect of Waste Polyethylene and Wax-Based
Additives on Bitumen Performance," MDPI, vol. 13, p. 3733, 2021.
[6] Meor Othman Hamzah,Seyed Reza Omranian, and Babak Golchin, "A review on the
effects of agimg on properties of asphalt binders and mictures," Caspian Journal of
Applied Sciences Research, vol. 4, pp. 15-34, 2015.
[7] Rean Maharaj, Vitra Ramjattan-Harry, and Nazim Mohamed, "Rutting and Fatigue
Cracking Resistance of Waste Cooking Oil Modified Trinidad Asphaltic Materials," The
Scientific World Journal, 2015.
[8] Guilian Zou, Jian Xu, Chung Wu, "Evaluation of Factors that Affect Rutting Resistance
of Asphalt mixes by Orthogonal Experiment Design," International Journal of Pavement
Research and Technology, vol. 16, pp. 30078-5, 2017.
[9] Yassir Abo Almaali1, and Shakir Al-Busaltan, "Effect of Aggregate Gradation on Rutting
of Thin Asphalt," in Conf. Series: Materials Science and Engineering, Iraq, 2020.
[10] Yu Zhang, Qingqing Song, Quan Lv, Hongxin Wang, "Influence Of Different
Polyethylene Wax Additives On The Performance Of Modified Asphalt Binders And
Mixtures," Construction And Building Materials, Vol. 302, P. 124115, 2021.
[11] Murat Kucukvar, Mehdi Noori, Gokhan Egilmez, "Stochastic Decision Modeling For
Sustainable Pavement Designs," International Joyrnal Springer Life Cycle Assess, 2014.
[12] Majid Harooni Jamaloei, Mohsen Aboutalebi Esfahani, Mohammad Filvan Torkaman3,
"Rheological And Mechanical Properties Of Bitumen Modified With Sasobit,
Polyethylene,Parrafin, And Their Mixture," ASCE Material Civil Engineering, Vol.
31(7), Pp. 1-19, 2019.
[13] Jizhe Zhanga, Changjun Sun, Ming Lianga, Hongguang Jiang, "Enhancement Of Rutting
Resistance And Fatigue Behavior Of Asphalt Mixtures Modified By Recycled," In
Notthingham Core, UK, 2020.
[14] Aboelkasim Diab, Rouzbeh Ghabchi & Musharraf Zaman, Amr M. Wahaballa, "Warm
Mix Asphalt (WMA) Technologies: Benefits And Drawbacks," Functional Pavement
Design – Erkens Et Al., Pp. 02924-8, 2016.
[15] C. Estakhri, J. Button, And A. E. Alvarez,, "“Field And Laboratory Investigation Of
Warm Mix Asphalt In Texas"," Texas Transportation Institute, Texas, 2010.
[16] J. D’angelo Et Al, "Warm-Mix Asphalt: European Practice," Department Of
Transportation,Fhwa, Washington, Dc, Alexandria, 2008.
[17] Hurley, G.C., Prowell, B.D. And Kvasnak, A.N, "Field Trial Of Warm Mix Asphalt
Technologies: Construction Summary," NCAT Report, Ohio, 2009.
[18] B. D. Prowell, G. C. Hurley, P.E., And B. Frank, , "Warm-Mix Asphalt," National
Asphalt Pavement Assosiation, 2012.
[19] A. Kavussi And L. Hashemian, , "“Laboratory Evaluation Of Moisture Damage And
Rutting Potential Of Wma Foam Mixes"," International Journal Pavement Engineering,
Vol. 13 No.5, Pp. 415-423, 2012.
[20] Hussein A. Kassem & Ghassan R. Chehab, "Characterisation of the mechanical
performance of asphalt concrete mixtures with selected WMA additives," International
Journal of Pavement Engineering, p. 1018, 2019.
[21] S. C. Wax, "" Roads and Trials with Sasobit®. "," 2005..
[22] Riccardo Lamperti , James Grenfell , Cesare Sangiorgi Claudio Lantieri , Gordon D.
Airey, "Influence of waxes on adhesion properties of bituminous binders," Construction
and Building Materials, vol. 76, pp. 404-412, 2015.
[23] Boucher J. L., "“Wax in asphalt - a literature review”," SHRP by Southwestern
Laboratories, Houston Texas,, 1991.
[24] P. L. L. B. P. J. P. G. J. P. Such C., "“Les paraffines dans les bitumens"," in Eurasphalt
& Eurobitume Congress, French, 2000.
[25] E. Y, "Influence of waxes on bitumen and asphalt concrete mixture performance,," Road
Materials and Pavement Design, vol. 10(2), pp. 313-335, 2009.
[26] Lu, X., Langton, M., Olofsson, P., Redelius, P., "Wax morphology in bitumen.," Journal
of Materials Science, pp. 1893-900, 2005.
[27] Musser, B.J., Kilpatrick, P.K., "Molecular characterization of wax isolated from a variety
of crude oils,," Energy Fuels, vol. 12(4), pp. 715-25, 1998.
[28] Lu, X., Redelius, P, "Effect of bitumen wax on asphalt mixture performance,"
Construction and Building Materials, vol. 21(11), pp. 1961-1970, 2007.
[29] P.K., Kringos, N., Wallqvist, V., Birgisson, B, "Micromechanical investigation of phase
separation in bitumen by combining AFM with DSC results," Road Materials and
Pavement Design, pp. 25-37, 2013.
[30] Julide Oner, Burak Sengoz, Natalia Maidanova, Ali Topal, "Evaluation of rheological
effects of waxes on bitumen from different sources," in 6th Eurasphalt & Eurobitume
Congress, Prague, 2016.
[31] "Bitumen and bituminous binders – determination of the paraffin wax content," European
Standard EN 12606-1, Europe, 2007.
[32] Y. .. R. P. Edwards, "Rheological effects of waxes in bitumen," Energy and Fuels, vol.
17(3), pp. 511-520, 2003.
[33] X. R. P. Lu, "Compositional and Structural Characterization of Waxes Isolated/n from
Bitumens,," American Chemical Society: Energy & Fuels, vol. 20(2), pp. 653-660, 2006.
[34] Jenny Liu and Peng Li, "Low Temperature Performance of Sasobit-Modified Warm-Mix
Asphalt," Journal of Materials in Civil Engineering, vol. 24(1), pp. 57-63, 2012.
[35] Wu C, Zeng M., "Effects of additives for warm mix asphalt on performance," Journal
test Evaluation, vol. 40(2), pp. 265-72, 2011.
[36] Qian Qin, Michael J. Farrar, Adam T. Pauli, Jeramie J. Adams, "Morphology, thermal
analysis and rheology of Sasobit modified warm mix asphalt binders," the science and
technology of Fuel and Energy, vol. 115, pp. 416-425, 2014.
[37] Muhammad Sohail Jameel · Hafiz Muhammad Abubakar · Ali Raza · Sohail Iqbal · Raja
Abubakar Khalid, "Effect of Aging on Adhesion and Moisture Damage of Asphalt:A
Perspective of Rolling Bottle and Bitumen Bond Strength Test," International Journal of
Pavement Research and Technology, pp. 00021-5, 2021.
[38] Qishi Li, Henglong Zhang, Zihao Chen , "Improvement of short-term aging resistance of
styrene-butadiene rubber modified asphalt by Sasobit and epoxidized soybean oil,"
Construction and Building Materials, vol. 271, p. 121870, 2021.
[39] Haibo Ding and Simon A. M. Hesp, "Balancing the Use of Wax-Based Warm Mix
Additives for Improved Asphalt Compaction with Long-Term Pavement Performance,"
ACS Sustainable Chemistry and Engineering, vol. 9, pp. 7298-7305, 2021.
[40] Bo Li, Jinyu Yang, Xiaohui Li, Xiang Liu , Feng Han and Liangying Li, "Effect of ShortTerm

Aging Process on the Moisture Susceptibility of Asphalt Mixtures and Binders
Containing Sasobit Warm Mix Additive," Advances in Materials Science and
Engineering, no. Hindawi Publishing Corporation, 2015.
[41] Y. Edwards, Y. Tasdemir, U. Isacsson, "Effects of commercial waxes on asphalt oncrete
mixtures performance at low and medium temperatures," Cold Regions Science and
Technology, vol. 45, no. 1, pp. 31-41, 2006.
[42] Y. Tasdemir, "High temperature properties of wax modified binders and asphalt
mixtures," Construction and Building Materials, vol. 23, pp. 3220-3224, 2009.
[43] He Gui-ping, Wong Wing-gun, "Laboratory study on permanent deformation of foamed
asphalt mix incorporating reclaimed asphalt pavement materials," Construction and
Building Materials, vol. 21, no. 8, pp. 1809-1819, 2006.
[44] Mohsen Aboutalebi Esfahani,Majid Harouni,Mohammad Filvan Torkaman,
"Rheological and Mechanical Properties of Bitumen Modified with Sasobit,
Polyethylene, Paraffin, and Their Mixture," Journal of Materials in Civil Engineering,
vol. 31, no. 7, pp. 04019119-1, 2019.
[45] J. Gao, K. Yan, W. He, S. Yang and L. You, " High temperature performance of asphalt
modified with Sasobit and Deurex," Construction and Building Materials, vol. 164, p.
783–791, 2018.
[46] Khalid A. Ghuzlan, Ph.D and Mohammad O. Al Assi, "Sasobit-Modified Asphalt Binder
Rheology," Journal of Materials in Civil Engineering , vol. 29, no. 9, pp. 04017142-1,
2017.
[47] K. Lakshmi Roja, Amara Rehman, Mabrouk Ouederni, Senthil Kumar Krishnamoorthy,
Ahmed Abdala & Eyad Masad , "Influence of polymer structure and amount on
microstructure and properties of polyethylene-modified asphalt binders," Materials and
Structures, vol. 54, 2021.
[48] Haopeng Zhang, Hong hang, haibo Ding, and Jin Dai, "Determining the Sustainable
Component of Wax-Based Warm Mix Additives for Improving the Cracking Resistance
of Asphalt Binders," ACS Sustainable Chemistry and Egineeering, vol. 9, pp. 1501615026,
2021.
[49] Taha A. Ahmed, Hosin David Lee, R.Christopher Williams, "Using A Modified Asphalt
Bond Strength Test To Investigate The," International Journal Of Pavement Research
And Technology, Vol. 11, Pp. 28-37, 2018.
[50] Mostafa Nakhaei, Mostafa Nakhaei, Aliasghar Akbari Nasrekani, And Dr. David H.
Timm, P.E.,, "Chemical, Rheological, And Moisture Resistance Properties Of Warm Mix
Asphalt Modified With Polyethylene-Wax," In 97th 5 Annual Meeting Of The
Transportation Research Board, Tehran, Iran, 2018.
[51] Abbas Solouki, Ratnasamy Muniandy, Hassim Salihudin, and Behnam Kheradmand,
"Rheological Property Investigation of Various Sasobit-modified Bitumen," Petroleum
Science and Technology, vol. 33, no. 7, pp. 773-779, 2015.
[52] Hassan Fazaeli, Hamid BehbahaniHi, Amir A. Amini, "High and Low Temperature
Properties of FT-Paraffin-Modified Bitumen," Advances in Materials Science and
Engineering, pp. 1687-8434, 2015.
[53] G. Airey, "“Fundamental binder and practical mixture evaluation of polymer modified
bituminous materials"," International Journal Pavement Engineering, vol. 5, no. 3, pp.
137-151, 2004.
[54] A. M. E. a. B. H. U. Hanz, "“Impacts of WMA production temperatures on binder aging
and mixture flow number"," Journal Associate Asphalt Paving Technology, vol. 80, pp.
459-490, 2011.
[55] Morteza Rezaeizadeh Herozi, Wilfredo Valenzuela, Alireza Rezagholilou, "New Models
for the Properties of Warm Mix Asphalt with Sasobit," MDPI, vol. 3, p. 347–364, 2022.
[56] Ching Yern Chee, Haryani Azahari, Mohamad Rehan, "Modification of Bitumen
Characteristic by Using Recycled Polyethylene," Molecular Crystals and Liquid
Crystals, vol. 604, no. 1, 2014.
[57] Muhammad Aakif Ishaq, Loretta Venturini, and Filippo Giustozzi, "Correlation Between
Rheological Rutting Tests on Bitumen and Asphalt Mix Flow Number," International
Journal of Pavement Research and Technology , vol. 15, no. 6, 2021.
[58] Muhammad Aakif Ishaq;Loretta Venturini;Filippo Giustozz, "Muhammad Aakif
Ishaq;Loretta Venturini;Filippo Giustozz," International Journal of Pavement Research
and Technology, 2021.
[59] J. D. a. D. W. M. Anderson, "Asphalt: The Magazine of The Asphalt Institute"," Asphalt
Institute, March 2022.
[60] Khaleel Al-Adham and Hamad Al-Abdul Wahhab, "Influence of temperature on Jnr
values of polymer modified asphalt binders," International Journal of Pavement
Research and Technology, vol. 11, no. 6, pp. 603-610, 2018.
[61] K. A. Ghuzlan and M. O. Al Assi, "Sasobit-Modified Asphalt Binder Rheology.," Journal
of Materials in Civil Engineering, vol. 29, no. 9, 2017.
[62] Umme Amina Mannan, Md Rashadul Islam, Rafiqul A.Tarefder, "Effects of recycled
asphalt pavements on the fatigue life of asphalt under different strain levels and loading
frequencies," International Journal of Fatigue, vol. 78, pp. 72-80, 2015.
[63] Meor Othman Hamzah, Seyed Reza Omranian, Babak Golchin, "A Review on the Effects
of Aging on Properties of Asphalt Binders andMixtures," Caspian Journal of Applied
Sciences Research, vol. 4, no. 6, pp. 15-34, 2015.
[64] Shin-Che Huang, Hervé Di Benedetto, Advances in Asphalt Materials: Road and
Pavement Construction, United Kingdom: Woodhead Publishing Series in Civil and
Structural Engineerin, 2015.
[65] Ashoori et al, "The relationship between SARA fractions and crude oil stability,"
Egyptian Journal of Petroleum, vol. 26, no. 1, pp. 209-213, 2017.
[66] A. D.-2. "Standard Specification for Penetration-Graded Asphalt Binder for Use in
Pavement Construction," ASTM International, pp. 1-2, 2020.
[67] A. D.-1. "Standard Test Method for Softening Point of Bitumen (Ring-and-Ball
Apparatus)," ASTM International, pp. 1-2, 2020.
[68] H. F. "“Investigating effects of nano/SBR polymer on rutting performance of binder and
asphalt mixture,”," Advances in Materials Science and Engineering, vol. 10, pp. 1-7,
2018.
[69] ASTM D113-17, Standard Test Method for Ductility of Asphalt Materials, PA, United
States: ASTM International, 2017.
[70] ASTM D 4402, "“Standard Test Method for Viscosity Determination Using a Rotational
Viscometer,”," ASTM Standard, vol. 87, pp. 1-5, 2000.
[71] T. Bennert, "Mixing And Compaction Recommendations For Warm Mix Asphalt," The
State University of New Jersey, and U.S. Department of Transportation, USA, 2017.
[72] R. B. "Mix Design Practices for Warm-Mix Asphalt," ransportation Research Board, and
National Cooperative Highway, NCHRP Report 691, 2011.
[73] A. I. Commitee, " Determining Lab Mixing and Compaction Temperatures for Binders,"
AI, Lexington, KY, 2016.
[74] N. W. McLeod, "PVN as a Measure of Paving Asphalt Temperature Susceptibility, and
its Relationship to Paving Asphalt Specification," in McAsphalt Engineering Services,
Toronto, Canada, 1989.
[75] A. D. 7.-1. "Standard Test Method for Determining the Rheological Properties of Asphalt
Binder Using a Dynamic Shear Rheometer," ASTM International, pp. 1-5, 2017.
[76] AASHTO T240, Standard Method of Test for Effect of Heat and Air on a Moving Film
of Asphalt Binder (Rolling Thin-Film Oven Test), American Association of State
Highway and Transportation Officials (AASHTO), 2022.
[77] A. T. "Estimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude
Sweep," American Association of State Highway and Transportation Officials, pp. 10114,
2001.
[78] A. D. 7.-2. "“Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of
Asphalt Binder Using a Dynamic Shear Rheometer.”," ASTM Standard, pp. 5-20, 2020.
[79] A. D.-2. "Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt
Binder (Rolling Thin-Film Oven Test)," ASTM International, pp. 1-6, 2022.
[80] M. C. N. S. a. A. G. "“Introduction of a New Parameter to Quantify the Fatigue Damage
in Asphalt Mastics and Asphalt Binder,"," Coatings, vol. 11, no. 7, p. 828, 2021.
[81] A. D.-0. "“Standard Test Method for Separation of Asphalt into Four Fractions.”," ASTM
International, 2018.
[82] Ana M Rodríguez Pasandín and Ignacio Pérez PérezIgnacio Pérez Pérez, "Effects of
asphalt penetration grade and mineralogical composition on asphalt-aggregate bond,"
Petroleum Science and Technology, vol. 22, p. 32, 2014.
[83] Hassan Fazaeli, Hamid Behbahan, Amir Ali Amini,, "High and Low Temperature
Properties of FT-Paraffin-Modified Bitumen," Advanced in Materials Science and
Engineering, 2012.
[84] Abbas Solouki, Hassim Salihudin, Ratnasamy Muniandy, "EFFECT OF BLENDING
SPEEDS ON THE RHEOLOGICAL PROPERTIES OF SASOBIT," in Universiti Putra
Malaysia, Malaysia, 2014.
[85] Zahi Chamoun, Mena I. Souliman, Elie Y. Hajj, and Peter Sebaaly, "Evaluation of select
warm mix additives with polymer and rubber modified asphalt mixtures," Journal Civil
Engineering, vol. 42, pp. 377-388, 2015.
[86] F. Y. "Effect of wax-based," Construction Building Material, vol. 262, 2020.
[87] Lucidalva S. Pinheiro, Paulo R. N. Fernandes, Rivelino M. Cavalcante, Ronaldo F.
Nascimento, Jorge B. SoaresSandra A. SoaresJosé A. K. Freire, "Polycyclic aromatic
hydrocarbons from asphalt binder: extraction and characterization".
[88] Emad Kassem, Lorena Garcia Cucalon, Eyad Masad & Dallas Little, "Effect of warm
mix additives on the interfacial bonding characteristics of asphalt binders," International
Journal of Pavement Engineering, pp. 1-14, 2016.
[89] Kim, H., Lee, S.-J., and Amirkhanian, S. N. , "Hakseo Kim, Soon-Jae Lee, Serji
N.Amirkhanian," Construction and Building Materials, vol. 25, no. 1, pp. 183-189, 2011.
[90] W.J. Sichina, PerkinElmer Instruments, "Measurement of Tg by DSC," Thermal
Analaysis, Vols. PETech-09, 2000.
[91] Qian Qin, Mike Farrar, Thomas F. Turner, Jean-Pascal Planche, "Characterization of the
Effects of Wax (Sasobit®) on Asphalt Binder," Federal Highway Administration, no.
Western Research Institute, 2015.
[92] Redelius, P., Lu, X., Isacsson, U.,, "Non-classical wax in bitumen,," International
Journal of Road Materials and Pavement Design, vol. 3(1), 2002.
[93] S. R. "Relationships between SARA fractions of conventional oil, heavy oil, natural
bitumen, residues," Fuel, vol. 216, pp. 330-340, 2018.
[94] M P. &. N Rahi, "Rutting Characteristics of Styrene-Ethylene/Propylene-Styrene
Polymer Modified Asphalt," Journal of Materials in Civil Engineering, vol. 27, no. 4,
2015.
[95] M. Anderson, J. D'Angelo and D. Walker, "Asphalt: The Magazine of The Asphalt
Institute," Asphalt Institute, [Online]. Available: http://asphaltmagazine.com/mscr-abetter-tool-for-characterizing-high-temperature-performance-properties/.

[Accessed 20
March 2017].
[96] K. Kubo, "Recycling in Japan," Application of Reclaimed Asphalt Pavement and
Recycled Asphalt Shingles in Hot-Mix Asphalt, Vols. TR Circular E-C188, pp. 60-66,
2014.
[97] K. K, "Application of Reclaimed Asphalt Pavement and Recycled Asphalt Shingles in
Hot-Mix Asphalt," Recycling in Japan, vol. TR Circular, no. E-C1188, pp. 60-66, 2014.
[98] C. Nicholls, J. Valentin, L. Soukupova, K. Mollenhauer, BRRC, M. Tusar, N. Bueche, S.
Bressi, C. Karcher, F. Batista, M. S. d. Costa, G. Malkoc, TU Vienna and H. Soenen,
"Functional Durability-related Bitumen Specification (FunDBitS): Identified correlations
between bitumen and asphalt properties (Interim Report)," CEDR Call 2013: Energy
Efficiency – Materials and Technology, 2015.
[99] S. Ashoori, M. Sharifi, M. Masoumi and M. M. Salehi, "The relationship between SARA
fractions and crude oil stability," Egyptian Journal of Petroleum, vol. 26, no. 1, pp. 209213,
2017.