| 研究生: |
蔡旻諭 Min-Yuh Tsai |
|---|---|
| 論文名稱: |
考慮政府補貼及投資設備之紙類回收模型 Paper recycling model considering government subsidies and investment equipment |
| 指導教授: | 陳振明 |
| 口試委員: | |
| 學位類別: |
碩士 Master |
| 系所名稱: |
管理學院 - 工業管理研究所 Graduate Institute of Industrial Management |
| 論文出版年: | 2020 |
| 畢業學年度: | 108 |
| 語文別: | 中文 |
| 論文頁數: | 64 |
| 中文關鍵詞: | 廢紙回收 、逆物流 、Stcakelberg 模型 、敏感度分析 |
| 外文關鍵詞: | waste paper recycling, reverse logistics, Stcakelberg model, sensitivity analysis |
| 相關次數: | 點閱:19 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
在日常生活中,我們使用到回收再製產品的時機越來越多,而在這個環保意識逐漸抬頭的社會中,對資源回收也逐漸重視,但卻發現對於紙類回收規定卻微乎其微。因此本研究針對資源回收中的紙類回收項目來作探討,討論整個紙類廢紙從回收,處理再到製成紙製品的循環經濟的流程,希望能讓民眾對資源回收意識提升同時,能同時注意到紙類回收重要性。
本研究主要參考賴宥儒(2019)研究並將Sarkar and Moon(2014)的想法延伸到其中,主要探討紙類回收供應鏈與以政府為首的基管會之間的關聯,並將原先的四階段的數學模型中,加入不同變數,使整體關聯更貼近現實,並透過代入實際數值探討改變不同數值所發生的改變。本文中基管會與紙類回收流程為:民眾將廢紙集中轉賣給回收廠,回收廠再將蒐集來的廢紙集中壓磚運送到處理廠,而處理廠會將紙磚分解並轉換為紙漿或紙筒,再將產物交給製造廠,製造廠經過專業手法將原料加工製成紙類再生製品,最後將產品再販售回給消費者手中,而基管會所扮演的角色便是從製造廠手中收取稅收用以補貼回收廠來達到整個循環經濟的最大利益。
In our daily lives, we have used more and more opportunities to recycle products,and in this society where environmental awareness is gradually rising, we are gradually paying attention to resource recycling, but we have found that there are very few regulations on paper recycling. Therefore, this study discusses the paper recycling project in resource recycling, and discusses the recycling economy process of the entire paper waste paper from recycling, processing to making paper products, hoping to increase public awareness of resource recycling At the same time note the importance of paper recycling.
This research mainly refers to the research of 賴宥儒(2019) and extends the idea of Sarkar and Moon (2014) to the main model. It mainly explores the relationship between the paper recycling supply chain and the government-led foundation management committee. In the mathematical model, different variables are added to make the overall relationship closer to reality. The basic management and paper recycling process in this article is: the people collectively resell the waste paper to a recycling plant, and the recycling plant then collects the collected waste paper and presses it to the processing plant, and the processing plant will decompose and convert the paper brick into Pulp or paper tube, then the product is handed over to the manufacturing plant. The manufacturing plant processes the raw materials into paper recycled products through professional methods, and finally sells the product back to consumers. The Environmental Protection Administration(EPA) by the plant is used to subsidize the recycling plant to achieve the best interests of the entire circular economy.
中文文獻
[1] 王海萍(2007),「對企業棄物流的辯證思考-基於社會責任視角」,青海社會科學,1001—2338(2007)03—0004—04。
doi :10.14154/j .cnki .qss .2007.03.002
[2] 邱琬筑、陳願慈、劉家瑋(2012),「嘆為觀「紙」─原生紙 v. s.再生紙」,國立台中高農。
[3] 張其祿(2002),「環境管制:經濟誘因工具的選擇與評估」,中國行政評論,11(3),45-62。
doi:10.6635/cpar.2002.11(3).02
[4] 曾湧驛(2019),「資源化業者循環經濟商業模式研究─以產品服務系統(PSS)探討廢棄物利用」,國立台北科技大學,碩士論文。
[5] 蔡東和(2017),「造紙業廢棄物循環利用及能源回收」,環境工程會刊。
[6] 賴宥儒(2019),「紙類回收與逆物流模型探討」,國立中央大學,碩士論文。
[7] 戴興盛(2007),「反思經濟誘因,自然保育與集體行動」,環境教育研究,5(1),1-39。
英文文獻
[8] Ayhan Demirbas (2011), Waste management, waste resource facilities and waste conversion processes, Energy Conversion and Management, 52, 1280-1287. doi:10.1016/j.enconman.2010.09.025
[9] Dewees, D., Mathewson, G. & Trebilcock M. (1983), Policy Alternatives in Quality Regulation In D. Dewees. The Regulation of Quality: Products, Services, Workplaces and the Environment, 36-40.
[10] Dowlatshahi, S. (2000), Developing a Theory of Reverse Logistics. Interfaces, 30(3), 143–155.
doi:10.1287/inte.30.3.143.11670
[11] Federico Valerio (2010), Environmental impacts of post-consumer material managements: Recycling, biological treatments, incineration, Waste Management, 30, 2357-2361.
doi:10.1016/j.wasman.2010.05.014
[12] Harold W. K (1997) Classics in Game theory, Princeton, NJ:Princeton University Press, ISBN 0-691-01193-1.
[13] Howse, R.(1993), Retrenchment, Reform or Revolution? The Shift to Incentives and the Furture of the Regulatory State. Alberta Law Review, 31:455.
[14] Hsuan Hong & Jhih-Sian Ke (2011), Determining advanced recycling fees and subsidies in “E-scrap” reverse supply chains, Journal of Environmental Management, 92, 1495-1502.
doi:10.1016/j.jenvman.2010.12.004
[15] Mao, Y., Hu, Y., Feng, Z., Wang, R., Chen, X., Zhang, W., & Yang, G. (2020), Job burnout and correlated factors of three‐tiered public health workers: A cross‐sectional study in China. Health & Social Care in the Community. doi:10.1111/hsc.12957
[16] María del Mar Alonso-Almeida & José Miguel Rodríguez-Antón (2020), The Role of Institutional Engagement at the Macro Level in Pushing the Circular Economy in Spain and Its Regions. International Journal of Environmental Research and Public Health
[17] Ouyang, L.Y., Chen, C.K., Chang, H.C., (2002), Quality improvement, setup cost and lead time reductions in lot size reorder point models with an imperfect production process. Comput. Oper. Res. 29 (12), 1701–1717.
[18] Pu-yan Nie & Pei-ai Zhang (2008), A Note on Stackelberg Games, Chinese Control and Decision Conference (CCDC 2008).
[19] Reuter, M., & Van Schaik, A. (2016). Gold–A Key Enabler of a Circular Economy: Recycling of Waste Electric and Electronic Equipment. In Gold Ore Processing (pp. 937- 958): Elsevier.
[20] Sarkar, B., & Moon, I. (2014). Improved quality, setup cost reduction, and variable backorder costs in an imperfect production process. International journal of production economics, 155: pp.204-213.
[21] Saurabh Agrawal et.al (2015), A literature review and perspectives in reverse logistics, Resources, Conservation and Recycling, 97, 76-92
[22] Sintana E. Vergara & George Tchobanoglous (2012), Municipal Solid Waste and the Environment: A Global Perspective, Annual. Rev. Environment. Resource, 37, 277-309.
doi:10.1146/annurev-environ-050511-122532
[23] Stewart, R.(1981), Regulation, Innovation and Administrative Law: A Conceptual Framework. California Law Review 69(5),1256-1377.
[24] Tim Roughgarden(2004), Stackelberd Scheduling Strategies, Society for Industrial and Applied Mathematics Vol. 33, No. 2, pp. 332–350.
[25] Zhanfeng Zhou (2012), Research on Pricing Decision of Multi-level Remanufacturing Reverse Supply Chain Based on Stackelberg Game, Applied Mechanics and Materials, 220-223, 290-293.
doi:10.4028/www.scientific.net/AMM.220-223.290
網路資源
[26] 台灣區造紙工業同業公會(2020),「歷年紙張及紙板統計」。取自
http://www.paper.org.tw/zh-tw/statistics/statistics/#five
[27] 行政院環保署(2020),「政策與法規」。取自
https://www.epa.gov.tw/Page/D6A2AD723FC0EC69
[28] 行政院環保署(2020),「歷年各縣市垃圾清理統計表」。取自
https://hwms.epa.gov.tw/dispPageBox/publicity/PublicityCp.aspx?ddsPageID=EPATWG61&
[29] 全國法規資料庫(2020),「廢棄物清理法」。取自
https://law.moj.gov.tw/LawClass/LawAll.aspx?pcode=O0050001
[30] 產業價值鏈資訊平台(2020),「造紙產業鏈簡介」。取自
https://ic.tpex.org.tw/introduce.php?ic=2000
[31] 「廢棄物處理設施操作維護及營運管理」,(2017)。取自
https://www.slideshare.net/liangyu72/20181117-123479149