由於非對稱壓延具有可有效降低壓延力、材料於壓延製程的安排上，更趨自由及多樣性等優點，於壓延工業上之應用有極大的助益，故本文使用有限元素軟體MARC針對乾摩擦下非對稱壓延進行模擬分析，以不同厚度的板材在不同非對稱壓延條件下，探討上下輥輪的圓周切線速度比值對壓延後板材的曲率、壓延力及壓延扭矩的影響。

Because asymmetric rolling can decrease the rolling force and the arrangement of material that makes the rolling arrangement become more free and variable, it brings great benefits on Engineer. In this paper, asymmetric rolling is simulated by using the finite element software MARC. Discussing curvature of specimens, rolling force and rolling torque with peripheral speed ratio of up roll and low roll by different specimen thickness.

[1] W. Johnson and G. Needham, “Theoretical and Experimental Analysis of Plates Asymmetric Rolling”, Journal of Materials Processing Technology, 45 (1994) 149-154.
[2] W. Johnson and G. Needham,”Further Experiments in Asymmetrical Rolling”, International Journal of Mechanical Science, 8 (1966) 443-455.
[3] N. Kamii and R. Terakado, “Study of the Rolling-Method of Hot Finishing Tandem Mill by Rolls with Different Dimaeters”, J. JSTP, 17 (1976) 966-972.
[4] K. Nakajima et al., “An Investigation of Rolling Property by Rolling Experiment in Asymmetrical Strip Rolling”, Proc. s-53 Sp. Conf. of JSTP, (1978) 25-28.
[5] K. Nakajima and H. Yamamoto, “Effects of Frictional Coefficient on Asymmetrical Strip Rolling”, Proc. the 31th Joint Conf. of JSTP, (1980) 451-454.
[6] D. Pan and D. H. Sansome, “An Experimental Study of the Effect of Roll Speed Mismatch on the Rolling Load during the Cold Rolling of the Thin strip”, Journal of Mechanical Working Technology, 6 (1982) 361-377.
[7] J. Pospiech, “A Note on the Influence of Some Factors Affecting Curvature in the Flat Rolling of strip”, Journal of Mechanical Working Technology, 15 (1987) 69-80.
[8] Lenard J. G., “Friction in cold rolling of a low carbon steel with lubricants ”, Journal of Materials Processing Technology, 99 (2000) 86-93.
[9] Zone-Ching Lin and Tang-guo Huang, “Hot rolling of an aluminum-copper sandwich flat strip with the three dimensional finite element method”, Journal of Materials Processing Technology, 99 (2000) 154-168.
[10] G. Sachs and L. J. Klingler, “The Flow of Metals through Tools of Circular Contour”, J. Applied Mechanics, 14 (1947) 88-98.
[11] C. F. Zorowski and A. Shutt, “Analysis of the Load and Torque Characteristics of Single-Roll-Drive Mills”, International Research in Production Engineering, (1963) 380-387.
[12] E. Orowan, “The Calculation of Roll Pressure in Hot and Cold Flat Rolling”, Proceedings of the Institution of Mechanical Engineers, 150 (1943) 140-167.
[13] W. Johnson and G. Needham,”An Experimental Study of Asymmetrical Rolling”, Applied Mechanics Convention, Cambridge, Instn. Mech. Engrs. 180 (April, 1966) 270-281.
[14] W. Johnson and G. Needham,”Further Experiments in Asymmetrical Rolling”, International Journal of Mechanical Science, 8 (1966) 443-455.
[15] M. I. Ghobrial, “A Photoelastic Investigation on the Contact Stresses Developed in Rolls during Asymmetrical Flat Rolling”, International Journal of Mechanical Science, 31 (1989) 751-764.
[16] K. Narita et al., “The Characteristics of Curvature in Asymmetrical Cold Rolling, ”Proc. s-63 Sp. Conf. of JSTP, (1988) 241-244.
[17] 鄒國益, ”應用切片法於非對稱板材壓延之研究”, 博士論文, 國立中山大學機械工程研究所, 84.
[18] J. Markowski, H. Dyja, M. Knapinski, A. Kawalek, “Theoretical analysis of the asymmetric rolling of sheets on leader and finishing stands”, Journal of Materials Processing Technology. 138 (2003) 183-188.
[19] 陳狄成, “應用有限元素法於缺陷板材壓延加工之解析”, 博士論文,國立中山大學機械與機電工程學系, 92.
[20] H. Danesh Manesh and A. Karimi Taheri, “An investigation of deformation behavior and bonding strength of bimetal strip during rolling ”, Mechanics of Materials, 37 (2005) 531-542.
[21]F.Farhat-Nia, M.Salimi, M.R.Movahhedy," Elasto-plastic finite element simulation of asymmetrical plate rolling using an ALE approach", Journal of Materials Processing Technology, 177 (2006) 525-529
[22] E. N. Dvorkin, M. B. Goldschmit, M. A. Cavaliere, P. M. Amenta, O. Marini, W. Stroppiana, “2D finite element parametric studies of the flat-rolling process. ”, Journal of Materials Processing Technology, 68 (1997) 99-107.
[23] Zone-Ching Lin and Chi-Chih Shen, “A coupled finite element method for a three-dimensional analysis of the flat rolling of aluminum with reductions”, Journal of Materials Processing Technology, 110 (2001) 10-18.
[24] Ali Nuri Dogruoglu, “On constructing kinematically admissible velocity fields in cold sheet rolling”, Journal of Materials Processing Technology, 110 (2001) 287-299.
[25] C.W. Knight, S.K. Hardy, A.W. Lees, K.J. Brown, “Investigations into the influence of asymmetric factors and rolling parameters on strip curvature during hot rolling”, Journal of Materials Processing Technology, 134 (2003) 180-189.
[26] S.A.A. Akbari Mousavi, S.M. Ebrahimi, R. Madoliat, “Three dimensional numerical analyses of asymmetric rolling”, Journal of Materials Processing Technology, 187-188 (2007) 725-729.
[27] H. D. Hibbitt, P. V. Marcal and J. R. Rice, “A Finite Element Formulation for Problems of Large Strain and Large Displacement”, Int. J. Solids Struct., 6 (1970) 1069-1086.
[28] R. M. McMeeking and J. R. Rice, “Finite Element Formulations for Problems of Large Elastic-Plastic Deformation”, Int. J. Solids Struct. 11 (1975) 601-616.
[29] “Theory and user information”, MARC Analysis Research Corporation . Volume A. Version K7.
[30] 葉維磬, 陳育川, 1996 “非對稱壓延板材曲率變化之實驗研究”, 中國機械工程師學會第十三屆研討會, 台灣大學, 台北市, (p.p634~641).
[31] 陳育川, “非對稱壓延板材曲率變化之實驗研究”,碩士論文, 國立中央大學機械工程研究所, 85.
[32] 顏瑞泰, “非對稱壓延加工問題之有限元素法分析”, 碩士論文, 國立中央大學機械工程研究所, 89.
[33] 江卓培, “漸開線外齒輪鍛造之有限元素分析”, 碩士論文, 國立中央大學機械所, 1999.
[34] 李健彰, “引伸成形加工問題之有限元素分析”, 碩士論文, 國立中央大學機械工程研究所, 89.
[35] 林賢斌, “平版壓延之條狀法與流函數法解析及實驗驗證”, 碩士論文, 國立中央大學機械工程研究所,
[36] “Mentat Command Reference”, MARC Analysis Research Corporation. Version 3.1, pp. 3-345~3-350.
[37] 廖鴻賓, “MARC應用於冷鍛加工分析及其驗證分析”, 碩士論文,國立中央大學機械工程研究所, 2003.
[38] 葉維磬, 李有山, 張東堯, 2007 “異徑壓延板材彎曲曲率之實驗研究”, 中國機械工程師學會第二十四屆研討會, 中原大學, 桃園縣, (p.p282)
[39] 張東堯, “異徑壓延板材彎曲曲率之實驗研究”, 碩士論文,國立中央大學機械工程研究所, 2007.
[40] 江龍, “加工參數對A1050P板材經壓延加工後的曲率變化之實驗研究”, 碩士論文,國立中央大學機械工程學系, 2008.
[41] 陳遠欣, “A1050P板材經非對稱壓延之彎曲行為的實驗研究”, 碩士論文,國立中央大學機械工程學系, 2008