| 研究生: |
沈裕盛 Yu-Sheng Shen |
|---|---|
| 論文名稱: |
六十釐米口徑之六十倍望遠鏡設計 |
| 指導教授: |
孫文信
Wen-Shing Sun |
| 口試委員: | |
| 學位類別: |
碩士 Master |
| 系所名稱: |
理學院 - 照明與顯示科技研究所 Graduate Institute of Lighting and Display Science |
| 論文出版年: | 2017 |
| 畢業學年度: | 105 |
| 語文別: | 中文 |
| 論文頁數: | 87 |
| 中文關鍵詞: | 優化設計 、望遠鏡系統 、良視距離 、波前像差 、光學畸變 |
| 外文關鍵詞: | Optimization design, telescope system, eye relief, Strehl ratio, Optical distortion |
| 相關次數: | 點閱:7 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
提出設計一款60mm口徑六十倍的單孔式手持望遠鏡,在望遠鏡系統中可分為物鏡系統及目鏡系統,將兩系統分開做設計,設計完成後再將兩系統做結合成望遠鏡系統,物鏡系統由最大入射角度為0.55度半視角,焦距為350 mm,入瞳口徑為60 mm,目鏡系統由最大出射半視角角度為29.941度,焦距為5.833333 mm,出瞳為1 mm,良視距離為14.695257 mm,稜鏡的使用也利於人眼做觀測,再利用幾何光學關係求得所需的稜鏡折射率,將兩系統分別對波前像差、光學畸變、橫向色差,相對照度進行分析及校正是否達要設計要求,兩系統分別設計完成後再將兩系統做結合成望遠鏡系統其放大倍率為60 X,再進行一次分析確認完成後的成像品質是否達到要求,最後設計完成後再進行公差分析確保其設計能夠量產化,設計即完成。
I propose designing a 60 mm single hole telescope with the capability of 60X magnification power. The telescope system consitsts of a object system and a eyepiece system. Both systems are to be designed separately and assembled together afterwards. The maximum incident angle, focal length, entrance pupil diameter of the object system is 0.55 degree a half of FOV, 350 mm, and 60 mm respectively. The maximum exit half angle of view, focal length, exit pupil diameter, and eye relief, and of the eyepiece system are 29.941 degree, 5.833333 mm, 1 mm, and 14.695257 mm respectively. The usage of prisms makes observation via human eyes easier. By using geometric optics to obtain the required refractive index of prism, then analyzing and calibrating the wavefront error, optical distrotion,lateral color and relative illumination of to create both systems, the systems are then to be combined to create the telescope capable of 60X magnification. Afterwards, determine whether the image quality of the final product fits the standards via analyzation.
[1] A. V. Helden, “The beginnings, from Lipperhey to Huygens and Cassini,” Experimental Astronomy 25, 3-16 (2009).
[2] T. H. Court and M.V. Rohr, “A history of the development of the telescope from about1675 to 1830 based ondocuments in the Court Collection,” Transactions of the Optical Society 30, 60-207(1929)
[3] J. Ramsden, “A description of a new construction of eye-glasses for such telescopes as may be appliedto mathematical instruments”, Philosophical Transactions of the Royal Society 73 94-99(1782).
[4] G. Wolfschmidt, “The development of the Schmidt telescope,” AstronomischeNachrichten 330, 555-561 (2009).
[5] J. Kauffman, “NASA in crisis: The space agency’s public relations efforts regarding the Hubble space telescope,” Public Relations Review 23, 1-10 (1997).
[6] J. E. Greivenkamp and D. L. Steed, “The history of telescopes and binoculars: An engineering perspective,” Proc. SPIE 8129, 812002 (2011).
[7] V. Draganov, and D. James, “Compact telescope for free-space communications,” in:Current Developments in Lens Design and Optical Engineering III, Proc. SPIE 4767, 151–158 (2002).
[8] M. E. Rudd, “Chromatic aberration of eyepieces in early telescopes,” Annels of Science64, 1-18 (2007).
[9] D. A. Content, R. Goullioud, J. P. Lehan, and J. E. Mentzell, “Optical design trade study for the Wide Field Infrared Survey Telescope [WFIRST], ” Proc. SPIE 8146, 81460Y (2011).
[10] C.Y. Chen, M.D.Ke, Q.L. Deng, Y.H.Chang, P.L.Fan and S.W.Cheng, “Design of head-mounted-display eyepiece system of liquid crystal on silicon, ”Journal of the Chinese Institute of Engineers 35, 343-348 (2012)
[11] C. I. Onah and C. M. Ogudo, “Design and construction of a refracting telescope, ” International Journal of Astrophysics and Space Science2, 56-65 (2014).
[12] M. Siddique, F. Nasim, A. N. Khan and A. Gul, “Optical design of a rotating eyepiece telescope,” IOP Conf. Series: Materials Science and Engineering 146 (2016).
[13] W. S. Sun, C. L. Tien, J. W. Pan, K. C. Huang, P. Y. Chu, “Simulation of autofocus lens design for a cell phone camera with object distance from infinity to 9.754 mm,” Appl. Opt. 54, E203-E209 (2015).
[14] F/#, https://goo.gl/W7bZSm
[15] W. J. Smith, Modern optical engineering (McGraw-Hill, 2000) 3rd ed. , Chap. 9.
[16] D. Malacara and Z. Malacara, Hand of optical design (Marcel Dekker, 2004) 2rd ed., Chap. 15.
[17] E. Hecht, Optics (Addision Wesley, 2001) 4th ed. , Chap. 4.
[18] D. Vukobratovich, “Binocular performance and design,” Proc. of SPIE, 1168, pp 343-346, (1989).
[19] MIL-HDBK-141, Optical Design, in Military Standardization Handbook,(Defense Supply Agency, 1981) , Chap. 13.
[20] J. C. Wyant, Basic wavefront aberration theory for opticalmetrology, (Academic, 1992 ), Chap. 1.
[21] Airy disk, http://highscope.ch.ntu.edu.tw/wordpress/?p=62633
[22] A. J. M. Janssen, S. V. Haver, P. Dirksen and J. J. M. Braat , “Zernike representation and Strehl ratio of optical systems with variable numerical aperture,” Journal of Modern Optics 55, 1127-1157 (2008).
[23] V. N. Mahajan, “Strehl ratio for primary aberrations: some analytical results for circular and annular pupils,” J. Opt. Soc. Am. 72, 1258 (1982).