跳到主要內容

簡易檢索 / 詳目顯示

研究生: 張文成
Wei-Chen Chang
論文名稱: 旋轉複合葉片振動分析
指導教授: 王有任
Yu-Zane Wang
口試委員:
學位類別: 碩士
Master
系所名稱: 工學院 - 機械工程學系
Department of Mechanical Engineering
畢業學年度: 89
語文別: 中文
論文頁數: 38
中文關鍵詞: 複合材料葉片
相關次數: 點閱:12下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

  • 本文以等速旋轉之複合懸臂板,利用數值方法模稜旋轉積層扭曲複合葉片之共振頻率特性。應用三維彈性變形理論,採八節點之等參元素有限單元型式,求得扭曲板上某一單元之位能、動能,利用Lagrange 方程式導出有限元素單元之運動方程式,來了解之複合葉片的旋轉共振頻率與相對應之變形。並討論不同轉速、扭轉角pretwisted angle)及安置角(Setting Angle)下,自然頻率變化趨勢,在設計、應用上所需注意的的動態特性。並依據本文之數值結果,顯示旋轉複合葉片之模態及振動頻率變化趨勢。


    摘要……………………………………………………………………Ⅰ 目錄……………………………………………………………………Ⅱ 圖表目錄………………………………………………………………Ⅳ 符號說明……………………….…………………………………….Ⅵ 第一章緒論……………………………………………………………1 1-1前言………………………………………………………..1 1-2文獻回顧……………………………………………………1 1-3內容簡介……………………………………………………3 第二章系統模型之建立與運動方程式………………………………..4 2-1 基本假設……………………………………………….………4 2-2 建立系統模型……………………………….…………………5 2-2.1系統應變能………………………………………..………5 2-2.2系統動能…………………………………………………..6 2-3 有限元素公式推導…………………………………………….8 2-3.1 有限元素模式…………………………………………….9 2-3.2 元素應變能……………………………………………...10 2-3.3 元素動能………………………………………………...11 2-3.4 運動方程式……………………………………………..12 第三章數值結果與討論.…………………………………………….13 3-1 無旋轉平板振動分析………………………………………..14 3-2 旋轉平板振動分析…………………………………………..14 3-3 旋轉扭曲板振動分析………………………………………..15 第四章 結論與未來發展……...……………………………………….16 圖例……………………………………………………………………..17 參考文獻………………………………………………………………..35 附錄A………….………………………………………………………...37 附錄B……………………………………………………………………38

    1.Carnegie,W.,Thomas,J. 1972, ”The Effects of Shear Deformation and Rotatry Inertia on the Lateral Frequencies Of Cantilever Beams in bending,” Journal of Engineering for Industry, pp. 267-278.
    2.Swaminathan, M., Rao, J. S. 1977, ”Vibration of Rotating Pretwisted and Tapered Blades,” Mechanism and Machine theory, pp 331-337.
    3.Henry, R., Lalanne, M. 1971, “Vibration Analysis of Rotating Compressor Blades,” Journal of Engineering for Industry, Trans ASME, Vol. 3, No. 2, pp. 1028-1035.
    4.Nagamatsu, A., Michimura , S. 1978, “Vibration of Blade of Rotating Impeller,” Theoretical and Applied Mechanics, Vol.26, pp, 327-338.
    5.Leissa, AW. Lee, J. K., Wang, A. J. 1982, “Rotating Blade Vibration Analysis Using Shells,” ASME. Journal of Engineering for Power Vol.104, pp. 296-302
    6.Qatu MS., Leissa, AW. 1991, “Vibration Studies for Laminated Composite Twisted Cantilever Plates,” Int. J. Mech. Sci. Vol. 33, No. 11, pp. 927-940.
    7.Crawley, E. F., Jones, D. W., Dugundji.J . 1982 “Vibration of Cantileverd Graphite/Epoxy Plates with Bending-Torsion Coupling,” Journal of Reinforced Plastics and Composites, Vol.1, pp. 224-226.
    8.Bhumbla, R., Kosmatka, J. B. 1993 “Stability of Spinning Shear-Deformable Laminated Composite Plates,”Journal of Sound and Vibration, Vol. 163, No. 1, pp. 83-99.
    9.Bhumbla, R., Kosmatka, J. B. Reddy, J. N.1990. “Free Vibration Behavior of Spinning Shear-Deformable Plates Composited of Composite Materials,”AIAA. Vol. 28, No. 11, pp. 1962-1970.
    10.Karmakar,A., Sinha, P. K. 1997, ”Finite Element Free Vibration Analysis of Rotating Laminated Composite Pretwisted Cantilever Plates,” Journal of Reinforced Plastics and Composites, Vol. 16 pp. 1467-1491.
    11.Vinson, J. R., Sierakawski, R. L. 1986. “The behaviorof Structures Composed of Composite Materials,” pp. 43-49.

    QR CODE
    :::