應用MARC有限元素分析軟體，結合最佳化軟體IMSL，建立MARC之最佳化系統。利用此最佳化系統，來分析渦輪葉片鍛造加工問題，以NACA0012之斷面為例，建立模具外型曲線，求得鍛件誤差量為最小之模具外形。
首先探討不同摩擦條件之下，模具最佳化後，對鍛件表面誤差的影響。並探討不同摩擦條件下對成型力量曲線及等效應力分佈的影響，並且以相同模具外型，改變摩擦條件，對成型力量的影響。

This paper attempts to establish the optimal system using FEM software MARC combining with the optimal software IMSL. This paper also applys this system to analyze the turbine blade forging, and takes the cross-section of NACA0012 for example of finding the optimal die shape to minimise the thickness error.
First, this paper discusses the influence on thickness errors, forging force and equivalent stress at different friction conditions after optimisation.Then this study also discusses the influence on the influence on forging force at different friction conditions with the same die shape.

[1] L, B. Aksevov, N. R. Chitkra, W. Johnson, “Pressure and deformation in the plane strain pressing of circular section bar to form turbine blades”, Int. J. Mesh. Sci. 17 (1975) 681-691
[2] R. Hill, Mathematical Theory of Plasticity. Oxford University Press, London, 1950
[3] W. Johnson, Proc. Third U.S. Natn. Cong. Appl. Mech., Brown University, Providence, p.571, 1958
[4] Beom-Soo Kang, Naksoo Kim, S. Kobayashi,”Computer-aided perform design in forging of an airfoil section blade”, Int. J. Mach. Tools Manufact. 30 (1990) 43-52
[5] Zhen Wang, Kemin Xue, Yingwei Liu, “Backward UBET simulation of a blade”, J. Mater. Process. Technol. 65 (1997) 18-21
[6] H. Ou, R. Balendra, “Preform design for forging of aerofoil sections using FE simulation”, J. Mater. Process. Technol. 80-81 (1998) 144-148
[7] Mei Zhan, Liu Yuli, Yang He, “Research on a new remeshing method for the 3D FEM simulation of blade forging”, J. Mater. Process. Technol. 94 (1999) 231-234
[8] Z. M. Hu, T. A. Dean, “Aspect of forging of titanium alloys and the production of blade forms”, J. Mater. Process. Technol. 111 (2001) 10-19
[9] Xian Lu, Raj Balendra, “Temperature-related errors on aerofoil section of turbine blade”, J. Mater. Process. Technol. 115 (2001) 240-244
[10] X. Duan, T. Sheppard, “Shape optimization using FEA software: a V-shaped anvil as an example”, J. Mater. Process. Technol. 120 (2002) 426-431
[11] Mei Zhan, Yuli Liu, He Yang, “Influence of the shape and position of the perform in the precision forging of a compressor blade”, J. Mater. Process. Technol. 120 (2002) 80-83
[12] H. Ou, C. G. Armstrong, “Die shape compensation in hot forging of titanium aerofoil sections”, J. Mater. Process. Technol. 125-126 (2002) 347-352
[13] Liu Yuli, Yang He, Zhan Mei, Fu Zengxiang, “A study of the influence of the friction conditions on the forging process of a blade with a tenon ”, J. Mater. Process. Technol. 123 (2002) 42-46
[14] H. Ou, C.G. Armstrong, M.A. Price, “Die shape optimization in forging of aerofoil sections”, J. Mater. Process. Technol. 132 (2003) 21-27
[15] “IMSL MATH/LIBRARY, User’s Manual, Fortran Subroutines for Mathematical Allpications,” IMSL, Inc., Ver2.0, April, 1992, pp. 1030-1035
[16] 陳正宏,“渦旋對翼片性能影響之研究”,碩士論文, 國立成功大學造船與船舶機械工程學系,2002
[17] H. D. Hibbitt, P. V. Marcal and J. R. Rice, “A Finite Element Formulation for Problems of Large Strain and Large Displacement”, Int. J. Solids Struct., Vol.6, pp.1069~1086,1970.
[18] R. M. McMeeking and J. R. Rice, “Finite Element Formulations for Problems of Large Elastic-plastic Deformation”, Int. J. Solids Struct., Vol.11, pp.601~616,1975.
[19] “Theory and user information”, MARC Analysis Research Corporation. Volume A. Version 7
[20] ”Mentat Command Reference”, MARC Analysis Research Corporation. Version3.1.
[21] “User Subroutines and special Routines”, MARC Analysis Research Corporation. Volume D. Version 3.1.
[22] 廖鴻賓,“MARC應用於冷鍛加工分析及其驗證分析”,碩士論文, 國立中央大學機械工程研究所, 2003
[23] G. Maccarini, C. Giardini, and G. Pellegrini, “The influence of die geometry on cold extrusion forging operations” : FEM and experimental results, J. Mater. Process. Technol. 27 (1991) 227-238