簡易檢索 / 詳目顯示
| 研究生： |
王韡蒨 Wei-Chien Wang |
|---|---|
| 論文名稱： |
台灣地區活性粒料之檢測方法研究 Study of the test methods to identify the reactivity of aggregate in Taiwan |
| 指導教授： |
李釗
Chau Lee |
| 口試委員: | |
| 學位類別： |
碩士 Master |
| 系所名稱： |
工學院 - 土木工程學系 Department of Civil Engineering |
| 畢業學年度： | 91 |
| 語文別： | 中文 |
| 論文頁數： | 335 |
| 中文關鍵詞： | 鹼質與粒料反應 、岩相分析 、活性粒料 、混凝土 |
| 外文關鍵詞： | petrographic examination, reactive aggregate, concrete, alkali-aggregate reaction |
| 相關次數： | 點閱：17 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
邇來在興建重要工程之時，主辦單位相當重視在施工前對粒料活性進行檢測，以避免使用活性粒料造成混凝土在數年後發生鹼質與粒料反應。在研析世界各國相關規範後，發現理論基礎相似之試驗方法，在相關試驗變數上多作模糊說明或有不同之規定，且對活性粒料的判定標準亦有不同，顯示許多國家都已建立起適合當地的試驗規範與判定標準。國內專家學者曾對本島29條河川進行粒料活性調查，其中至少有11條河川產的粒料結論不一致，因此本研究的目的在以接受度較高的ASTM C1293為基礎，釐清各種不同試驗間包括ASTM C289、C1260、C227、中國及日本蒸壓法、其他新發展方法及岩相分析等方法之相關性，提出適合於台灣地區活性粒料檢測方法之建議，以供日後建立CNS規範參考，避免誤用活性粒料影響混凝土耐久性。研究成果包括四個主要部份：1.對現有規範運用於台灣地區活性粒料之檢測結果、試驗方法間之相關性比較、適合於台灣地區活性粒料之判別標準檢討；2.岩相分析運用於鹼質與粒料反應之檢測研究；3.發展準確、快速且適合台灣地區活性粒料之檢測方法及判定標準；4.提出適合於台灣地區活性粒料之檢測方法及運用流程之建議。
Identification of aggregate reactivity is required in many concrete construction projects to reduce the possibility of inducing expansive alkali-aggregate reaction. However, many conflict results have obtained due to many parameters listed in the specifications are not clearly defined. Study of related specifications in the world, the test methods with the same philosophy contain different parameters and different accept level for non-reactive aggregate. The purposes of this research are to clearly establish a test method and accept level for identification of reactive aggregate in Taiwan. ASTM C1293, the concrete prism expansion test, will be the basis of this research. Different methods including ASTM C227, ASTM C1260, and improving methods are to be test. Tests including C289, C227, autoclave method, and petrographic examination of aggregates are used to compare the results of C1293 for defining the accept level for non-reactive aggregate. The results of this research will be the reference for establishment of CNS specification.
參考文獻
1.Stanton, T.E., “Influence of Cement and Aggregate on Concrete Expansion,” Engineering News-Record, pp.59-61, 124 Feb., 1940.
2.Swamy, R.N., “The Alkali-Silica Reaction in Concrete,” Van Nostrand Reinhold, New York, 1992.
3.許書王，「台灣地區鹼質與粒料反應抑制策略之研究」，博士論文，國立中央大學土木工程研究所，中壢，1999年。
4.王淑慧，「台灣地區岩石之鹼－粒料反應潛能研究」，碩士論文，國立中央大學土木工程研究所，中壢 ，1999年。
5.李釗、饒正、張道光、陳桂清，「花蓮港區混凝土構造物鹼質與粒料反應之調查研究」，台灣省交通處港灣技術研究所，1998年。
6.李釗、許書王，「高雄港區混凝土構造物鹼質與粒料反應調查與潛勢分析研究」，交通部運輸研究所港灣技術研究中心期末報告，2000年。
7.柯正龍，「台中、基隆及蘇澳港港區混凝土構造物鹼質與粒料反應調查研究」，碩士論文，國立中央大學土木工程研究所，中壢，1999年。
8.陳仁達，「花東地區鹼-粒料反應及防治方法」，碩士論文，國立中央大學土木工程研究所，中壢 ，1999年。
9.巫柏蕙，「港灣混凝土構造物鹼質與粒料反應檢測方法評估研究」，碩士論文，國立中央大學土木工程研究所，中壢，2000年。
10.Gillott, J.E., “Alkali-aggregate reaction in concrete,” Engineering Geology, Vol.9, pp.303-326, 1975.
11.Stanton, T.E., “Expansion of Concrete Through Reaction Between Cement and Aggregate,” Transactions, American Society of Civil Engineers, Col. 107,pp. 54-126, 1942.
12.Touma, W.E., Fowler, D.W., and Carrasquillo, R.L., “Alkali-silica reaction in portland cement concrete: testing methods and mitigation alternatives,” Research Report ICAR 301-1F, 2001.
13.Fournier, B., and Bérubé, M.A., “Alkali-Aggregate Reaction in Concrete: a Review of Basic Concepts and Engineering Implications,” Canadian Journal of Civil Engineering, Vol.27, Number 2, pp.167-191, April 2000.
14.李釗、許書王、陳桂清，1996，「由破裂之消波塊探討鹼骨材反應」，台灣省政府交通處港灣技術研究所港灣報導。
15.Lee, C., “Available alkalis in fly and their effects on alkali-aggregate reaction,” Ph.D., Dissertation, Iowa State University, 1986.
16.李釗、許書王、陳桂清，「由破裂之消波塊探討鹼骨材反應」，港灣報導，pp.30-40，1996年10月。
17.Stark, D.C., “Lithium salt admixtures – an alternative method to prevent expansion alkali-silica reactivity,” Portland Cement Association, July 1992.
18.Hobbs, D.W., “Alkali-Silica Reaction in Concrete,” Thomas Telford, London, U.K., p.83, 1988.
19.蔣元駒、韓素方，『混凝土工程病害與修補加固』，海洋出版社，北京，中國，pp.365-406，1996年7月。
20.Standard Australia, “Alkali Aggregate Reaction – Guidelines on Minimizing the Risk of Damage to Concrete Structures in Australia,” p.20, 1996.
21.Hadley, D.W., “Alkali reactivity of carbonate rocks-expansion and dedolomitization,” Proceeding Highway Research Board, Vol.40, pp.462-474, 1961.
22.西林新藏，成功大學演講記錄，1993年3月。
23.Cole, W.F., Lancuk, C.J. and Sandy, M.J., “Products formed in an aged concrete,” Cement and Concrete Research, Vol.11, pp.443-454, 1981.
24.Van, A., J.H.P. and Visser, S., “Formation of hydrogarnets: calcium hydroxide attack on clays and feldspars,” Cement Concrete and Research, Vol.7, pp.39-44, 1977.
25.Van, A., J.H.P. and Visser, S., “Reaction of Ca(OH)2 and of Ca(OH)2 + CaSO4．2H2O at various temperatures with feldspars in aggregates in aggregate used for concrete making,” Cement Concrete and Research, Vol.8, pp.677-681, 1978.
26.Metha, P.K., “Concrete structure, properties, and materials,” pp.145-150, 1986.
27.Diamond, S., “A review of the alkali-aggregate reaction and expansion mechanism, alkali in cement and in concrete pore solutions,” Cement and Concrete Research, Vol. 5, pp.329-346, 1975.
28.Hobbs, D.W., “Expansion of concrete due to alkali-silica reaction,” The Structural Engineer, Cement, Concrete, and Aggregate, England, 1984.
29.Hill, E.D., “Alkali limits for prevention of alkali-silica reaction: a brief review of their development,” Cement, Concrete, and Aggregate, Vol. 18, No. 1, pp. 3-7, 1996.
30.Thomas, M.D.A., Hootn, R.D., and Rogers, C.A., “Prevention of damage due to alkali-aggregate reaction in concrete construction – Canadian approach,” Cement, Concrete, and Aggregates, Vol. 19, No. 1, pp. 26-30, 1997.
31.Gillott, J.E., and Rogers, C.A., “Alkali-aggregate reaction and internal release of alkalis,” Magazine of Concrete Research, pp.99-112, 1994.
32.Bérubé, M.A., Duchesne, J., and Rivest, M., “Alkali contribution by aggregates to concrete,” Proceedings of the 10th International Conference on Alkali-Aggregate Reaction in Concrete, Australia, pp.899-906, August 1996.
33.Duchesne, J., and Bérubé, M.A., “The effectiveness of supplementary cementing materials in suppressing expansion due to ASR: Another look at the reaction mechanisms: Part 2: Pore solution chemistry,” Cement Concrete and Research, Vol.24, pp.221-231, 1994.
34.Diamond, S., “ASR-Another look at mechanisms,” Proceedings of the 8th International Conference on Alkali-Aggregate Reaction in Concrete, Kyoto, Japan, pp.83-94, August 1989.
35.Moore, A.E., “Effect of electric current on alkali-silica reaction,” Proceedings of the 4th International Conference on Effects of Alkalis in cement and concrete, Purdue University, pp.69-71, August 1978.
36.Ozol, M.A., “Alkali-silica reaction of concrete electrical substation piers accelerated by electrical currents,” Petrography applied to concrete aggregates, ASTM STP 1061, pp.106-120, 1990.
37.Shayan, A., “Combined Effects of AAR and Cathodic Protection Currents in Reinforced concrete,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.229-238 June 2000.
38.SHRP-C-343, “Eliminating or minimizing alkali-silica reactivity,” Strategic Highway Research Program, 1993.
39.Sibbick, R.G., and Page, C.L., “Mechanisms affecting the development of alkali-silica reaction in hardened concrete exposed to saline environments,” Magazine of Concrete Research, Vol. 50, No. 2, pp. 147-159, June 1998.
40.Nakano, K.I., Kibayashi, S., and Arimoto, Y., “Influence of reactive aggregate and alkali compounds on expansion of alkali-silica reaction,” Review of the 38th General Meeting, Japan, pp. 96-99, 1984.
41.British Cement Association, “The diagnosis of alkali-silica reaction-report of a working party,” pp.36, 1992.
42.Poole, A.B., “Introduction to alkali-aggregate reaction in the concrete,” Blackie, Glasgow and London, pp.1-29, 1992.
43.Lenzner, D., and Ludwig, V., “The alkali aggregate reaction with opaline sand stone from Schleswig-Holstein,” Proceedings of the 4th International Conference on Effects of Alkalis in cement and concrete, Purdue University, pp. 11-34, 1978.
44.Stark, D., and Depuy, G., “Alkali-silica reaction in five dams in southwestern United States,” In Proceedings of the Katharine and Bryant Mather International Conference on Concrete Durability, pp.1759-1786, April/May 1997.
45.Bérubé, M.A., Chouinard, D., Frenette, J., Boisvert, L., Pigeon, M., and Rivest, M., “Effectiveness of sealers in counteracting ASR in plain and air-entrained laboratory concretes exposed to wetting and drying, freezing and thawing, and salt water,” In supplementary Papers, 4th CANMET/ACI/JCI International Conference on Recent Advances in Concrete Technology, pp.375-396, June 1998.
46.Bérubé, M.A., Chouinard, D., Boisvert, L., Frenette, J., and Rivest, M., “Influence of wetting –drying and freezing-thawing cycles and effectiveness of sealers on ASR,” Proceedings of the 10th International Conference on Alkali-Aggregate Reaction in Concrete, Australia, pp.1056-1063, August 1996.
47.Bérubé, M.A., and Fournier, B., “Alkali-aggregate reaction in concrete,” Gordon & Breach Publisher, 2000.
48.Stark, D., “The moisture condition of field concrete exhibiting alkali-silica reactivity,” In Proceedings of the CANMET International Workshop on Alkali-Aggregate Reaction in Concrete, May 1990.
49.wamy, R.N.S, “Effects of alkali-aggregate reactivity on material stability and structural integrity,” Proceedings of the CANMET/ACI International Workshop on Alkali-Aggregate Reaction in Concrete, pp.233-241, October 1995.
50.Bérubé, M.A., and Fournier, B., “Canadian Experience with Testing for Alkali-Aggregate Reactivity in Concrete,” Cement and Concrete Composites, Vol. 15, pp. 27-47, 1993
51.ASTM C227-97, ”Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method),” Annual Book of ASTM Standards, Section 4, Vol.04.02, 1999.
52.ASTM C1260-94, ”Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method),” Annual Book of ASTM Standards, Section 4, Vol.04.02, 1999.
53.ASTM C1293-95, “Standard Test Method for Concrete Aggregates by Determination of Length Change of Concrete Due to Alkali-Silica Reaction,” Annual Book of ASTM Standards, Section 4, Vol.04.02, 1999.
54.ASTM C289-94, “Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method),” Annual Book of ASTM Standards, Section 4, Vol.04.02, 1999.
55.ASTM C295-90, “Standard Guide for Petrographic Examination of Aggregates for Concrete,” Annual Book of ASTM Standards, Section 4, Vol.04.02, 1999.
56.”Testing Aggregate – Part 123: Method for determination of alkali-silica reactivity – Concrete prism method,” BS 812-123, 1999.
57.”Testing Aggregate – Method for the assessment of alkali-silica reactivity – Potential accelerated mortar-bar method,” BS 249, 1999.
58.”Guide to the interpretation of petrographical examinations for alkali-silica reactivity,” BS 7943, 1999.
59.”Potential Expansivity of Aggregate (Procedure for Length Change Due to Alkali-Aggregate Reaction in Concrete Prism),” CSA A23.2-14A, 1999.
60.”Test Method for Detection of Alkali-Silica Reactive Aggregate by Accelerated Expansion of Mortar Bar,” CSA A23.2-25A, 1999.
61.”Rapid Identification of Alkali Silica Reaction Product in Concrete,” AASHTO T299-93.
62.”Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction,” AASHTO T303-96.
63.Guirguis, S., and Clarke, P., “Alkali Aggregate Reactivity – Towards Standard Test Methods,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.653-662, 2000.
64.Stark, D., “Handbook for the Identification of Alkali-Silica Reactivity in Highway Structures,” SHRP, Washington, DC, 1991.
65.Guthrie, J., George, D., and Carey, J.W., “A Simple Environmentally Friendly, and Chemically Specific Method for the Identification and Evaluation of the Alkali-Silica Reaction,” Cement and Concrete Research, V.27, pp.1407-1417, 1997.
66.Murata, K.J., and Norman, M.B., “An Index of Cry-Stallinity for Quartz,” American Journal of Science, Vol.276, pp.1120-1130, 1976.
67.Morino, K., “Alkali-Aggregate Reactivity of Cherty Rock,” Proceedings of the 8th International Conference on Alkali-Aggregate Reaction in Concrete, Kyoto, Japan, pp.501-506, 1989.
68.Nixon, P., and Sims, I., “Testing Aggregates for Alkali-Reactivity: Report of RILEM TC-106,” Materials and Structures/Mateiaux et Construction, Vol. 29, July, pp.323-334, 1996.
69.Stark, D., Morgan, B., Okamoto, P., and Diamond, S., “Eliminating or Minimizing Alkali-Silica Reactivity,” SHRP-C-343, National Research Council, Washington DC, 1993.
70.Barisone, G., and Restive, G., “Alkali－Silica Reactivity of Some Italian Opal and Flints Tested Using a Modified Mortar Bar Test,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.239-246, 2000.
71.Grattan-Bellew, P.E., “Test Methods and Criteria for Evaluation the Potential Reactivity of aggregates,” Proceedings of the 8th International Conference on Alkali-Aggregate Reaction in Concrete, Kyoto, Japan, pp.279-294, 1989.
72.Glauz, D., and Jain, V., “California’s Experience with Reactive Aggregates,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.325-334, 2000.
73.Grosbois, D., and Fontaine, M., “Evaluation of The Potential Alkali－Reactivity of Concrete Aggregates：Performance of Testing Methods and A Producer，s Point of View,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.267-276, 2000.
74.Lane, D.S., “Alkali－Silica Reactivity in Virginia, USA：Occurences and Reactive Aggregates,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.385-394, 2000.
75.Grosbois, D., and Fontaine, E., “Performance of the 60℃-Accelerated Concrete Prism Test for the Evaluation of Potential Alkali－Reactivity of Concrete Aggregates,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.277-286, 2000.
76.Jensen, V., and Fournier, B., “Influence of Different Procedures on Accelerate Mortar Bar and Concrete Prism Tests：Assessment of Seven Norwegian,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp.345-354, 2000.
77.褚炳麟，顏聰，盧俊寬，「台灣西部地區砂石粒料鹼質反應調查研究」，交通部台灣地區國道建設新建工程局研究報告，1994年。
78.楊世和，「台灣東部反應性粒料之探討及分析」，碩士論文，國立中央大學土木工程研究所，中壢 ，1997年。
79.王智興，「適合台灣地區鹼－粒料反應判斷圖之研究」，碩士論文，國立成功大學土木工程研究所，中壢，1999年。
80.林晏吉，「花東地區鹼-粒料反應之成因探討」，碩士論文，國立中央大學土木工程研究所，中壢，1999年。
81.蔡宗琳，「花蓮木瓜溪砂適當量的研究」，碩士論文，國立成功大學土木工程研究所，台南，1997年。
82.彭柏翰，「花蓮溪安山岩含量之悲極效應研究」，碩士論文，國立中央大學土木工程研究所，中壢，2000年。
83.何春蓀，「台灣地質概論」，1997年。
84.張文恭，「花蓮地區單一岩種之鹼－骨材反應研究」，碩士論文，國立中央大學土木工程研究所，中壢，2000年。
85.「砂石採取整體管理改善計畫書」，經濟部水利處，1999年。
86.「研究區域內料源所在地進行粒料物性調查分析」，交通部公路局，2000年
87.Tang, M.S., Deng, M, Xu, Z., Lan X., and Han S., “Alkali-Aggregate Reaction in China,” Proceedings of the 10th International Conference on Alkali-Aggregate Reaction in Concrete, Australia, pp.195-201, 1996.
88.Shayan, A., Diggings, R. and Ivanusec, I., “Effectiveness of Fly Ash in Preventing Deleterious Expansion Due to Alkali-Aggregate Reaction in Normal and Steam-Cured Concrete,” Cement and Concrete Research, Vol.26, No.1, pp.153-164, 1996.
89.S. Guirguis, and P. Clarke, “Alkali aggregate reactivity-towards standard test methods,” Proceedings of the 11th International Conference on Alkali-Aggregate Reaction in Concrete, Quebec, Canada, pp. 653-662, 2000.
90.Thomas, M.D.A., Blackwell, B.Q., and Nixon, P.J., “Estimating the Alkali Contribution from Fly Ash to Expansion Due to Alkali-Aggregate Reaction in Concrete,” Magazine of Concrete Research, Vol.48, No.177, pp.252-263, 1996.
91.Jensen, V., “Present Experience with Aggregate Testing in Norway,” Proceedings of the 10th International Conference of Alkali-Aggregate Reaction in Concrete, Australia, pp.133-141, 1996.
92.Bérubé, M.A., and Frenette, J., “Testing Concrete for AAR in NaOH and NaCl Solutions at 38℃ and 80℃,” Cement and Concrete Composites, Vol. 16, pp.207-218, 1994.
93.Rogers, C.A., “Alkali-Aggregate Reactivity in Canada,” Cement and Concrete Composites, Vol.15, pp.13-19, 1993.
94.http://leadstates.tamu.edu/ASR/library/gspec.stm.
95.陳文山，「岩石入門」，遠流出版公司，1997。
96.陳培源，「礦物種名與岩石名詞」，茂昌圖書有限公司，1999。
97.Streikeisen, A.L., “Classification and nomenclature of Volcanic Rocks and IUGS Subcommission on the Systematics of Igneous Rocks,” Geol. Rundsch, 69, pp.194-207, 1980.
98.陳正宏，「台灣之火成岩」，經濟部中央地質調查所，第2頁，1990。
99.莊文星，「台灣之火山活動與火成岩」，圖立自然科學博物管，1999。
100.CSA. 1994a. Appendix B－Alkali-aggregate reaction, “CSA A23.2-4－concrete materials and methods of concrete construction,” Canadian Standards Association, Toronto, Ont., 1994.
101.張郇生，「麥飯石探微－兼論膨潤石外形、特徵、及用途」，地質，經濟部中央地質調查所，第十九卷第一期，第68-88頁，1999。
102.Landgren, R., Sweet, S., “Investigation of durability of Wyoming aggregates,” Proc. Highway Res. Board 31, pp. 202-217, 1952.
103.Mielenz, R.C., “Petrographic examination of concrete aggregate,” Proceeding of American Society Test Material 54, pp.1188-1218, 1954.
104.Wakiaka, Y., “Alkali-silica reactivity of Japanese rocks,” Engineering Geology, 56, pp.211-221, 2000.
105.Katayama, T., Helgason, T.S., and Olafsson, H., “Petrography and alkali-reactivity of some volcanic aggregates from Iceland,” Proceedings of the 10th International Conference on Alkali-Aggregate Reaction in Concrete, Australia, pp.377-384, August 1996.
106.http://www.wra.gov.tw/2001/wr/riverm.asp, 2002.
107.「台灣地區陸上砂石分佈、品質、儲量與開發潛力研究」，經濟部，台北市，1987。
108.Tang, M.S., Han, S.F., and Zhen, S.H., “A rapid method for identification of alkali reactivity of aggregate,” Cement and Concrete Research, Vol.13, pp.417-422, 1983.
109.Tang, M.S, Lan, X.G., and Han, S.F., “Autoclave method for identification of alkali-reactive carbonate rock,” Cement and Concrete Composites, Vol.16, pp.163-167, 1994.
110.Hooton, R.D. and Rogers, C.A., “Evaluation of rapid of test methods for detecting alkali-reactive aggregates,” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.439-444, 1989.
111.Abe, M., Tomosawa, F., Mano, T. and Togasaki, K., “A study on the simple rapid test method used to judge the alkali reactivity of aggregate,” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.369-374, 1989.
112.Kanazu, T., Ohnuma, H., Nakano, T., and Ishida, H., “Study on the rapid estimation method of alkali aggregate reaction using concrete specimens,” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.375-380, 1989.
113.Nishibayashi, S., Kuroda, T., and Inoue, S., “Expansion characteristics of AAR in concrete by autoclave method,” Proceeding of the 10th International Conference on Alkali-Aggregate Reaction, Australia, pp.370-376, 1996.
114.Tamura, H., Takahashi, T., and Ohashi, M., “A test method on rapid identification of the future susceptibility of alkali-aggregate reaction in fresh concrete (Fresh-con GBRC rapid method),” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.351-356, 1989.
115.Kishitani, K. and Kobayashi, M., “Development and standardization of a rapid test method for identification of the alkali reactivity of aggregates,” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.357-362, 1989.
116.Kishitani, K., Kobayashi, M., and Tamura, H., “The rapid test JIS A 1804,” Cement and Concrete Composites, Vol.16, pp.169-175, 1994.
117.Fournier, B., Bérubé, M.A., and Bergeron, G., “A rapid autoclave mortar bar method to determine the potential alkali-silica reactivity of St. Lawrence Lowlands Carbonate Aggregates (Quebec Canada),” Cement Concrete and Aggregates, CCAGDP, Vol.13, No.1, pp.58-71, 1991.
118.Nishbayashi, S., Yamura, K., and Matsushita, H., “A rapid method of determining the alkali-aggregate reaction in concrete by autoclave,” Proceeding of the 7th International Conference on Alkali-Aggregate Reaction, Ottawa, pp.299-303, 1987.
119.Tamura, H., “A test method on rapid identification of alkali reactive aggregate (GBRC Rapid Method),” Proceeding of the 7th International Conference on Alkali-Aggregate Reaction, Ottawa, pp.304-308, 1987.
120.Criaud, A., Defossé, C., Chabanis, B., Debray, L., Michel, B., Sorrentino, D., Gallias, M., Salomon, M., Guédon S., and Le Roux, A., “The French standard methods for evaluating the reactivity of aggregates with respect to AAR: Results of an Inter-laboratory Program,” Cement and Concrete Composites, Vol.16, pp.199-206, 1994.
121.CECS 48:93, “A rapid test method for determining the alkali reactivity of sands and rocks,” 中國工程建設標準化協會標準（CECS）,1995.
122.JIS A 1804, “Methods of test for production control of concrete – Method of rapid test for identification of alkali reactivity of aggregate,” 2001.
123.AFNOR P 18-588, “Aggregates-dimensional stability test in alkali medium-accelerated mortar microbar test,” 12/1991.
124.AFNOR P 18-590, “Aggregates-dimensional stability test in alkali medium-accelerated mortar autoclave test,” 04/1993.
125.Chatterji, C., “An accelerated method for the detection of alkali-aggregate reaction of aggregate,” Cement and Concrete Research, Vol.8, pp.647-650, 1978.
126.CNS 1258 R3044，「卜特蘭水泥蒸壓膨脹試驗法」，經濟部標準檢驗局，1985。
127.Oberholster, R., and Davies, G., “An accelerated method for testing the potential reactivity of siliceous aggregates,” Cement and Concrete Research, Vol.16, pp.181-189, 1986.
128.Taguchi, T., Chatterji, S., and Kawamura, M., “A comparison of different methods of detection of alkali-silica reactivity of aggregates,” Cement and Concrete Research, Vol.23, pp.55-58, 1993.
129.Van Aardt, J.H.P., and Visser, S., Progress Report Part 2, CSIR Research Report BRR 577, Pretoria, 1982.
130.Shayan, A., Diggins, R.G., Ivanusec, I., and Westgate, P.L., “Accelerated testing of some Australian and overseas aggregates for alkali-aggregate reactivity,” Cement and Concrete Research, Vol.18, pp.843-851, 1988.
131.Shayan, A., “Experiment with accelerated tests for predicting alkali-aggregate reactivity,” Proceeding of the 8th International Conference on Alkali-Aggregate Reaction, KYOTO, pp.321-326, 1989.
132.Fournier, B., and Bérubé, M.A., “Application of the NBRI accelerated mortar bar test to siliceous carbonate aggregates produced in the St. Lawrence Lowlands, PART 1: influence of various parameters on the test results,” Cement and Concrete Research, Vol.21, pp.853-862, 1991.
133.Shayan, A., “The pessimum effect in an accelerated mortar bar test using 1 M NaOH solution at 80 ℃,” Cement and Concrete Composites, Vol.14, pp.249-255, 1992.
134.Shayan, A, “Effects of NaOH and NaCl solutions and temperature on the behavior of specimens subjected to acceleration AAR test,” Cement and Concrete Research, Vol.28, pp.25-31, 1998.
135.Grattan-Bellew, P.E., “A critical review of ultra-accelerated tests for alkali-silica reactivity,” Cement and Concrete Composites, Vol.19, pp.403-414, 1997.
136.Hooton, R.D., and Rogers, C.A., “Development of the NBRI rapid mortar bar test leading to its use in North America,” Construction and Building Materials, Vol.7, pp.145-148, 1993.
137.Davies, G., and Oberholster, R.E., “Use of the NBRI acceleration test to evaluate the effectiveness of mineral admixtures in preventing the alkali-asilica reaction,” Cement and Concrete Research, Vol.17, pp.97-107, 1987.
138.Shayan, A., Diggins, R.G., Ivanusec, I., and Westgate, P.L., “Accelerated testing of some Australian and overseas aggregates for alkali-aggregate reactivity,” Cement and Concrete Research, Vol.18, pp.843-851, 1988.
139.呂學俊，「鑛物科學」，中國文化大學出版部，第293頁，1988。
140.黃怡楨，「礦物學」，地球科學文教基金會，第547-554頁。
