跳到主要內容

簡易檢索 / 詳目顯示

回結果列表
研究生： 陳建宏
Jian-Hung Chen
論文名稱： 模糊控制與灰色預測於機械手臂視窗化之控制應用
Fuzzy Controller and Grey Prediction Model Applied to the
指導教授： 鍾鴻源
Hung-yuan Chung
口試委員:
學位類別： 碩士
Master
系所名稱： 資訊電機學院 - 電機工程學系
Department of Electrical Engineering
畢業學年度： 89
語文別： 中文
論文頁數： 56
中文關鍵詞： 模糊控制器 、灰色預測 、機械手臂 、簡易遺傳演算法 、視窗
外文關鍵詞： Fuzzy controller, Grey prediction, Robot arm, SGA, Windows
相關次數： 點閱：12  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本論文將探討模糊控制及灰色預測應用於三軸機械手臂的運動控制。最近，模糊控制器已成新興的潮流，雖然其設計時很方便，但對機械手臂的設計，往往會有超越量的情形發生及較差的暫態和穩態響應。因此，針對這個問題，本論文將採取灰色預測當做前饋式補償器，如此設計的模糊控制器，當超越量產生之前，便以力量之補償方式降下來，可預防超越量的產生，並且於上升時間也有不錯的暫態響應及較小的穩態誤差，並且使用最佳化之演算法－基因演算法去調適灰色預測內重要參數ak，使整個系統設計更加完善。再進一步討論，將設計比例-微分-積分控制器，並且與提出的方法做比較及分析。此外，本論文使用模糊速度控制器去控制手臂的等速運動及防止干擾(如負載量的變化)。最後，發現在大部分實驗中，機械手臂均可達到預期目標，而且藉由視窗化的軟體，將所有實驗及設計均視窗化，以求達到良好的人機使用介面。本論文將在最後探討小部分結果不甚理想的原因，並提出未來可以改進的方向。


    List of Contents Content Page Abstract List of Contents I List of Figures III List of Tables V Chapter 1. Introduction 1.1 Background 1 1.2 Motivation 2 1.3 Organization 3 Chapter 2. Problem Description and Proposed Method 2.1 Problem Description 4 2.2 Fuzzy Controller 5 2.3 Grey Prediction 7 2.4 Simple Genetic Algorithm 10 2.5 Proposed Method 13 Chapter 3. The Structure of the Hardware and Software 3.1 The hardware of robot arm 16 3.2 The supersonic sensor 16 3.3 Interface 18 3.3.1 Encoder/DAC interface 18 3.3.2 Analog Input/Output interface 19 3.3.3 Digital Input/Output interface 20 3.4 The Robot Arm 21 3.5 The Software 21 Chapter 4. Experimental Results and Discussions 4.1 Hardware Simulations 27 4.2 Experiment 1: the Position Control of the sita-axis 27 4.2.1 PID Controller 29 4.2.2 Proposed Method (Grey Prediction Feedforward Compensator) 32 4.2.3 Discussions Conclusion of the experiment 1 43 4.3 Experiment 2: the Speed Control of the sita-axis 43 4.3.1 Fuzzy speed controller with the extension of R-axis 45 4.3.2 Fuzzy speed controller with the load variation of R-axis 48 4.3.3 Discussions Conclusion of the experiment 2 49 Chapter 5. Conclusions and Recommendations 5.1 Conclusions 51 5.2 Recommendations 52 References 54 Appendix A 56

    [1] M. Sugeno, “Industrial Applications of Fuzzy Control”,
    North-Holland, New York, Elsevier Science Pub. Co., 1985.
    [2] B. A. M. Wakileh, K. F. Gill, “Use of Fuzzy Logic in
    Robotics”, Computers in Industry, vol.10, pp.35-46, 1998.
    [3] S. J. Huang, C. F. Hu, “Predictive fuzzy controller for
    robotic motion control” Proc. IEEE International
    Conference on Industry Applications, pp.1668-1672, 1995.
    [4] Y. W. Chu, H. Y. Chung, “A fuzzy controller with the Grey
    prediction model for the motion of a robot” M. S. thesis
    in Electrical Engineering, National Central University,
    2000.
    [5] Y. W. Chu, H. Y. Chung, “A fuzzy controller with the Grey
    prediction model for the motion of a robot”, Proc.22nd
    National Symposium on Automatic Control, Taiwan, R.O.C.,
    pp.267-271, March 2000.
    [6] C. C. Wong C. C. Chen, “Design of Fuzzy Control Systems
    with a Switching Grey Prediction”, Proc. IEEE
    International Conference on Fuzzy Systems, vol.1, pp.567-
    571, 1998.
    [7] J. L. Deng, John H. Wu, “Grey Theory and Analysis”, KaoLi
    Pub. Co., 1996.
    [8] J. L. Deng, “Introduction to grey system theory”, The
    Journal of Grey System vol.1, no.1, pp.1-24, 1989.
    [9] D. E. Goldberg, “Genetic Algorithms in Search,
    Optimization and Machine Learning”, Addison Wesley, 1989.
    [10] J. J. Grefenstette, “Optimization of control parameters
    for genetic algorithms”, IEEE Trans. System, Man
    Cybernetic, vol.16, no.1, pp. 122-128, 1986.
    [11] T. H. S. Li, M. Y. Shieh, “Design of a GA-based fuzzy PID
    controller for non-minimum phase systems”, Fuzzy Sets and
    Systems, vol.111, pp.183-197, 2000.
    [12] K. Belarbi, F. Titel, “Genetic Algorithm for the Design
    of a Class of Fuzzy Controllers: An Alternative Approach”,
    IEEE Trans. on Fuzzy System, vol.8, no.4, pp.398-405,
    August 2000.
    [13] C. W. Chuang, L. P. Yun, R. C. Hwang, “Grey-Fuzzy-Fuzzy
    Controller”, Third National Conference on Grey Theory and
    Application, pp.145-150, 1998.
    [14] Y. P. Huang, C. H. Huang, “A genetic-based fuzzy grey
    prediction model”, IEEE International Conference on
    Systems, Man, and Cybernetic, pp.1051-1056, 1995.
    [15] D. C. Hanselman, B. C. Kuo, “Matlab Tools for Control
    System Analysis and Design”, Prentice-Hall, Englewood
    Cliffs, New Jersey, 1995.
    [16] K. Ogata, “Discrete-Time Control Systems”, Prentice-
    Hall, Englewood Cliffs, New Jersey, 1995.

    QR CODE
    :::