雅加達是目前全球最快速成長的都會城市之一，而最近十年以來，其固體廢棄物產生量亦伴隨者人口的成長而快速成長，不過，截至目前為止，雅加達的固體廢棄物仍然是採用不符合可持續的發展原則的傳統方式在管理。面對越來越嚴重的固體廢棄物管理問題，印尼政府與雅加達市政府雖然嘗試透過立法方式，訂定具有一定程度的可持續的發展原則的固體廢棄物管理法規，但是，可具體落實固體廢棄物管理法規的相關辦法仍是付諸闕如。以雅加達為例，雅加達市清潔局目前與未來的執行計劃仍然是不符合可持續的發展原則，例如：仍然著重於下游末端的清運與掩埋，而忽視產生源頭的控制與減量，僅有一些社區自行建立的小型回收體系。針對雅加達市的固體廢棄物管理問題，本研究嘗試根據固體廢棄物的生命週期，針對不同的固體廢棄物產生源，家庭、商業及工業等，評選符合可持續的發展原則、環境友善原則及5R原則等適合雅加達市特性的各種固體廢棄物管理措施，以建立一套具有可持續性的雅加達市固體廢棄物管理策略。此外，本研究亦進一步將本研究所發展的可持續的固體廢棄物管理策略與措施，與現行的雅加達市固體廢棄物管理策略與措施，做環境、社會及經濟效益的分析比較，以供雅加達市做為未來檢討與修訂固體廢棄物管理策略與措施之參考。
關鍵詞：都市固體廢棄物管理策略、可持續的固體廢棄物管理措施、生命週期、可持續的發展原則、可持續的生活方式、環境友善、5R。

Solid waste management (SWM) in DKI Jakarta is conducted with conventional way without concerning its effect on sustainability aspects whereas the city grows rapidly as one of the prominent metropolitan city in the world. Moreover the city waste generation is almost decoupling its population growth in the past ten years. The Government of Indonesia (GoI) as well as DKI Jakarta Government has been trying to tackle the problem through lawmaking, that is, legislation enactment of SWM act and regulations that to some extent reflects sustainable SWM principles. However the implementation of the act, regulations, and policy on SWM is still lacking. Jakarta Cleansing Agency (JCA) current and future plan of SWM implementation focuses on unsustainable way, e.g. emphasize on downstream SWM whereas it should be implemented ever since potentially-wasted product are formed, heavily rely on establishing intermediate treatment facilities (ITF) to divert waste sent to landfill without clear concern on reducing waste from the source, solely rely on JCA on handling SWM, and also depend on community initiative and small scale recycling. Sustainable SWM strategy should be developed in DKI Jakarta in order to present livable and environmental friendly metropolitan city. The strategy development enclosed life cycle concept which view SWM from goods production until the disposal and return the material back to environment. Moreover 5R principle and sustainable living concept was imbued the measures listed. The measures on sustainable SWM principle were analyzed and applied to the existing condition of DKI Jakarta. The municipal solid waste (MSW) studied was focused according to the dominant source of MSW in DKI Jakarta i.e. household waste, commercial waste, and industrial waste. The overall proposed strategy is to establish sustainable living society that consists of SWM stakeholder, that is, government, industry, community, and recycling entities, that share equal responsibility in SWM based on their role. In addition, the sustainable SWM strategies and measures in this study were also conducted through analysis and comparison existing strategy and measures of municipal solid waste management in DKI Jakarta based on environmental, social and economic benefits as a reference for future review and revision of solid waste management strategies and measures.

ABRELPE. (2012). Guidelines for implementation of successful Sustainable Waste Management Plans. ISWA Papers, Reports & Guidelines.
Alatervo, S. J. (2013). The 6R's : Making A Sustainable Impact http://prosperouswaydown.com/6rs-making-sustainable-impact/
Aprilia, A., Tezuka, T., Spaargaren, G. (2012). Household Solid Waste Management in Jakarta, Indonesia: A Socio-Economic Evaluation. In L. F. M. Rebellon (Ed.), Waste Management - An Integrated Vision. InTech.
BPS. (2012). Jakarta in Figures. DKI Jakarta: Badan Pusat Statistik DKI Jakarta.
Carter, A. J., Pisaniello, John D., Burritt, Roger L. (2010). Government sustainability policy in Australia: moving from rhetoric to effective implementation. Adelaide, South Australia University of South Australia School of Commerce Centre for Accounting Governance and Sustainability.
Catton, W. (1986). Carrying capacity and the limits to freedom. Paper presented at the Paper prepared for Social Ecology Session 1, XI World Congress of Sociology, New Delhi. .
Ciegis, R., Ramanauskiene, J., Martinkus, B. (2009). The Concept of Sustainable Development and its Use for Sustainability Scenarios Inzinerine Ekonomika-Engineering Economics, 2.
Coalition, N. R. (2011). Environmental Recycling Benefits and Facts. http://www.recycling-revolution.com/recycling-benefits.html
Damanhuri, E., Padmi, T. (2008). Solid Waste Management
Department of Environmental Affairs and Tourism. (2000). Starter Document for Integrated Waste Management Planning in South Africa-Guideline Document-Final Draft: as applied in the Programme for the Implementation of the National Waste Management Strategy.
DKI Jakarta, G. (2014). Annual Regional Budget Plan. Jakarta: Retrieved from http://www.jakarta.go.id/.
Drexhage, J., Murphy, D. (2010). Sustainable Development: From Brundtland to Rio 2012 Paper presented at the High Level Panel on Global Sustainability, United Nations Headquarters, New York.
EEA. (2000). Defining Criteria for Evaluating the Effectiveness of EU Environmental Measures Towards a new EU framework for reporting on environmental policies and measures (Reporting on environmental measures - ‘REM’): European Environment Agency.
EEA. (2009). Diverting waste from landfill : Effectiveness of waste‑management policies in the European Union. Denmark: European Environment Agency.
ERM. (2005). Strategic Planning Guide for MSWM -User Guide to Step 3: Establishing the Strategic Planning Framework: ERM for World Bank/SDC.
Falkman, E. G. (1996). Sustainable Production and Consumption: A Business Perspective
Gatra. (2014). Balaikota Putuskan Kontrak Sampah dengan Swasta. Gatra. Retrieved from http://www.gatra.com/nusantara-1/jawa-1/46857-balaikota-putuskan-kontrak-sampah-dengan-swasta.html
HKEPD. (2005). Green Procurement. http://www.epd.gov.hk/epd/english/how_help/green_procure/green_procure.html
HKEPD. (2012a). Recovery and Recycling of Municipal Solid Waste in Hong Kong Hong Kong: Waster Reduction and EcoPark Group.
HKEPD. (2012b). Strengthening Waste Reduction : Is Waste Charging an Option ? Hong Kong: Environmental Protection Department
Houng, H. (2011, 2011/11/15). Waste Management in Taiwan. Paper presented at the R3C International Symposium, Singapore.
Institute, B. (2011). Global Metro Monitor : Volatility, Growth, and Recovery 2011 (M. P. Program, Trans.): The Brookings Institute.
ISWA. (2013). Sustainable Solid Waste Management & the Green Economy: International Solid Waste Association.
IYCN/UNEP/WWF. (1991). Caring for the Earth: A Strategy for Sustainable Living: IYCN/UNEP/WWF.
Jackson, T. (2005). Motivating Sustainable Consumption : a review of evidence on consumer behaviour and behavioural change University of Surrey: Centre for Environmental Strategy.
Jawahir, I. S. (2008). Beyond the 3R’s: 6R Concepts for Next Generation Manufacturing: Recent Trends and Case Studies. Paper presented at the Symposium on Sustainability and Product Development, IIT Chicago, the United States of America.
JCA (Producer). (2013, July 2014). Harmonisasi Rapergub dan SOP Turunan PERDA Pengelolaan Sampah. Pengelolaan Sampah di DKI Jakarta.
Lenntech. (2014). Matter cycles : The earthly cycles of water, nitrogen, phosphorus, sulphur and carbon. http://www.lenntech.com/matter-cycles.htm#ixzz33T69ek7V
Li, R. (2010). Municipal Solid Waste Management in China: Roskilde University.
Lindhqvist, T. (1992). Towards an [EPR]- analysis of experiences and proposals.
Marrakech, T. (2008). Sustainable Lifestyles and Education for Sustainable Consumption UNDESA.
McKinsey. (2011). Resource Revolution : Meeting the world's energy, materials, food, and water needs: McKinsey Global Institute and McKinsey Sustainability & Resource Productivity Pratice.
Morelli, J. (2011). Environmental Sustainability: A Definition for Environmental Professionals. Journal of Environmental Sustainability, 1.
NACFAM. (2009). Sustainable Manufacturing. http://www.nacfam.org/
NIST. (2010). Overview of sustainable manufacturing. http://www.mel.nist.gov/msid/SSP/introduction/manufacturing.html
O'Connor, M. (2006). The 'four spheres' framework for sustainability. Ecological Complexity, 3, 285-292.
OECD. (2001). Strategies for Sustainable Development: Guidance for Development Co-operation The DAC Guidelines. France: Organization for Economic Co-Operation and Development (OECD).
Prakasa, E. R. (2010). Volume produksi, sebaran tempat pembuangan sementara dan pengelolaan sampah padat rumah tangga di Jakarta Pusat: Bogor Agricultural University.
Regenerative. (2012). What is Sustainable Living ? Retrieved from http://www.regenerative.com/ website:
SAPROF. (2007). Jakarta Solid Waste Management Project. Jakarta: Special Assistance for Project Formation (SAPROF) for Japan Bank for International Cooperation.
Schübeler, P., Wehrle, K., Christen, J. (1996). Conceptual Framework for Municipal Solid Waste Management in Low-Income Countries Urban Management and Infrastructure. Switzerland: SKAT (Swiss Centre for Development Cooperation in Technology and Management).
SMI. (2010). How does Commerce define Sustainable Manufacturing? . http://www.trade.gov/competitiveness/sustainablemanufacturing/how_doc_defines_SM.asp
Sorlin, S. (1997). The road towards sustainability – a historical perspective. Uppsala: Uppsala University.
Sudhir, V., Srinivasan, G., Muraleedharan V. R. (1997). Planning for sustainable solid waste management in urban India. System Dynamics Review, 13(3), 223-246. doi: 10.1002/(SICI)1099-1727(199723)13:3<223::AID-SDR127>3.0.CO;2-Q
Sustainableliving. (2011). Sustainable Living : Sustainable Living Information & Resources.
Tchobanoglous, G., Theisen, H., Vigil, S. A. (1993). Meeting Federal- and State-Mandated Diversion Goals. In R. E. Paul H. King (Ed.), Integrated Solid Waste Management : Engineering Principles and Management Issues (International Edition ed.). Singapore.
Thidell, Å. (2010, 24-25 November 2010). Sustainable Consumptions and Green Lifestyles-Definition and Concepts Paper presented at the Workshop held by Nordic Council of Ministers and the Danish Environmental Protection Agency, Copenhagen.
Thorneloe, S. A., Weitz, K. A., Jambeck, J. (2005). Moving from Solid Waste Disposal to Materials Management in the United States. Paper presented at the The Tenth International Waste Management and Landfill Symposium Cagliari, Italy.
UNDESA. (2004). World Urbanization Prospects: The 2003 Revision In U. P. Division (Ed.), (Sales No. E.04.XIII.6 ed.). New York: UNDESA.
UNEP. (2001). Solid waste management. 97-118.
UNEP. (2009). Assessment of Current Waste Management System and Gaps therein Developing Integrated Solid Waste Management Plan Training Manual (Vol. 2).
UNMDG. (2005). United Nations Millennium Development Goals.
USEPA. (1998). Why and How to Start a Recycling-Based Manufacturing Enterprise: United States Environmental Protection Agency.
USEPA. (2002). What Is Integrated Solid Waste Management? (May 2002).
USEPA. (2009). Sustainable Materials Management : The Road Ahead. Retrieved from http://www.epa.gov/smm/pdf/vision2.pdf.
USEPA. (2012). Waste Diversion. Retrieved March 18, 2014, from http://www.epa.gov/greeningepa/waste/
USEPA. (2013). Municipal Solid Waste Generation, Recycling, and Disposal in the United States: Facts and Figures for 2011.
Vidanaarachchi, C. K., Yuen, S. T. S. , Pilapitiya, S. (2006). Municipal solid waste management in the southern province of Sri Lanka: problems, issues and challenges. Waste Management, 26, 920-930.
Vissers, S., Stolle, D. (2013). How do I change politics? Evaluating the effectiveness of political participation modes: Centre for the Study of Democratic Citizenship Department of Political science, McGill University.
WCED. (1987). Our Common Future. Oxford: Oxford University Press.
WHO. (1993). Information Management for Municipal Solid Waste Management Services. Western Pacific Regional Office: World Health Organization (WHO).