跳到主要內容

簡易檢索 / 詳目顯示

研究生: 李秉中
Ping-Chung Lee
論文名稱: 利用X光繞射峰形探討奈米粉末的粒徑分佈
Determination of Mean Diameter and Size Distribution of Nano-size Powder by X-ray Powder Diffraction
指導教授: 李文献
Wen-Hsien Li
李冠卿
Kuan-Ching Lee
口試委員:
學位類別: 碩士
Master
系所名稱: 理學院 - 物理學系
Department of Physics
畢業學年度: 91
語文別: 中文
論文頁數: 57
中文關鍵詞: 粒徑分佈X光
外文關鍵詞: Distribution, X-ray
相關次數: 點閱:17下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 我們利用小顆粒X光繞射理論來擬合奈米粉末的X光繞射譜圖,以判定奈米粉末之平均粒徑與粒徑分佈。若考慮粉末為單一粒徑,發現理論值與實驗值在繞射峰形底部甚不吻合。我們進而假設奈米粉末之粒徑分佈為高斯分佈或Lognormal分佈,將此粒徑分佈的因素利用峰形疊加的方法加入X光繞射譜圖之計算。一般實驗室用的X光繞射儀皆包含銅靶的Kα1及Kα2,我們在理論模擬中也加入了Kα1及Kα2兩種不同波長X光的組合效應。用此一模型去對奈米粉末的繞射峰形做擬合,由擬合的結果我們可以得到奈米粉末粒徑分佈的形式,再將此一分佈的結果與原子力顯微鏡所觀察到的結果相互比較,發現由擬合X光繞射峰形所得到的粒徑分佈結果與原子力顯微鏡所觀察到的結果十分相近。本方法也發展成利用X光繞射譜圖來判定奈米粉末的平均粒徑與粒徑分佈的方法。


    Finite size X-ray diffraction theory was used to determine the mean particle diameter and size distribution of powders composed of nano-scale particles. The X-ray diffraction patterns were analyzed assuming a single size as well as multi sizes for the powder. Better fits were frequently obtained when a size distribution for the powder was assumed, as expected. Gaussian and Lognormal distributions were then considered. Through the process, we were able to determine the size distribution of the powder by using the x-ray diffraction pattern. Comparisons of the results to that obtained from the AFM images were also presented.

    論文摘要………………………………………………………………I 致謝……………………………………………………………………II 目錄……………………………………………………………………III 圖目……………………………………………………………………V 表目……………………………………………………………………IX 第一章 奈米顆粒粒徑與粒徑分析方法簡介 1-1奈米顆粒粒徑簡介…………………………………………………1 1-2由微米至奈米尺度的粒徑測定方法簡介…………………………2 第二章 樣品備製與實驗儀器簡介 2-1 樣品備製…………………………………………………………7 2-2 X光繞射儀簡介……………………………………………………8 2-3 原子力顯微鏡簡介………………………………………………10 第三章 平均粒徑與粒徑分佈分析 3-1 X光繞射實驗……………………………………………………14 3-2 繞射峰形簡介……………………………………………………15 3-3單一粒徑奈米顆粒粒徑變化對繞射峰形之影響………………24 3-4粒徑分佈對繞射峰形的影響……………………………………37 3-5原子力顯微鏡與X光繞射模擬結果比較…………………………48 第四章 結論……………………………………………………………55 參考文獻………………………………………………………………56

    [1] R. M. German, Powder Metallurgy Science, Princeton: Metal Powder Industries Federation (1994).
    [2] 林正雄, 儀器總覽, 材料分析儀器, 91, 92, 93, (1998).
    [3] R. E. Lee, Scanning Electron Microscopy and X-ray Microanalysis, New Jersey: PTR Prentice Hall (1993).
    [4] D. B. Williams and C. B. Carter, Transmission Electron Microscopy, New York: Plenum (1996).
    [5] G. Binnig, H. Rohrer, C. Gerber, and E. Weibel, Appl. Phys. Lett., 40, 178 (1982).
    [6] 許樹恩, 吳泰伯, X光繞射原理與材料結構分析, 486, (1996).
    [7] C. G. Granqvist, and R. A. Buhrman, J. Appl. Phys. 47, 2200, (1976).
    [8] M. Fujii, S. Hayashi, T. Fukumoto, T. Terami, and K. Yamamoto, Materials Science and Engineering, A217/218, 176, (1996).
    [9] Kittel, Introduction to Solid State Physics, Chapter 2, 31, (1998).
    [10] M. J. Buerger, Elementary Crystallography, John Wiley & Sons, New York, (1963).
    [11] R. M. White and T. H. Geballe, Long Range Order in Solids, London: Academic, (1979).
    [12] E. E. Bertaut, Acta Crystallography 3, 14, (1950).
    [13] B. D. Cullity, Element of X-ray Diffraction, 388, Addision-Wesly, Reading, MA, (1956).
    [14] Amihood Doron, Ernesto Joselevich, Anat Schlittner and Itamar Willner, Thin Solid Films, 340, 183, (1999).

    QR CODE
    :::