簡易檢索 / 詳目顯示
| 研究生： |
白富成 Fu-Cheng Pai |
|---|---|
| 論文名稱： |
鈮酸鋰高速調制器之製作與封裝 |
| 指導教授： |
李清庭
Ching-Ting Lee |
| 口試委員: | |
| 學位類別： |
碩士 Master |
| 系所名稱： |
理學院 - 光電科學研究所碩士在職專班 Executive Master of Optics and Photonics |
| 畢業學年度： | 91 |
| 語文別： | 中文 |
| 論文頁數： | 86 |
| 中文關鍵詞： | 電磁場感測器 、調制器 、鈮酸鋰 |
| 外文關鍵詞： | Electromagnetic Field Sensor, Lithium Niobate, Modulator |
| 相關次數： | 點閱：18 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本文採用Z切鈮酸鋰晶體鈦擴散製程，以馬氏干涉儀架構製作強度調制器，透過良好的拋光研磨以光纖直接耦合的封裝方式，經由實際製作與光耦合方式的改良來達到插入損耗、光反射損耗、驅動電壓、消光比及響應頻寬等規格的實用化，我們在電極封裝時加入感應天線將調制器製作成電磁場感測元件，以實際的運用來驗證鈮酸鋰光調制器優異的特性。
[1] A. Yariv, “Direct amplitude modulation of semiconductor GaAs lasers up to X-band frequency,” Appl. Phys. Lett., vol. 43, p. 11, 1983.
[2] C. M. Gee, G. D. Thurmond, and H. W. Yen, “17-GHz bandwidth electrooptic modulator,” Appl. Phys. Lett., vol. 43, p. 998, 1983.
[3] P. S. Cross, R. A. Baumgatner, and B. H. Kolner, “Microwave integrated Optical modulator,” Appl. Phys. Lett., vol. 44, p. 486, 1984.
[4] R.A. Beaker, “Traveling-wave electro-optic modulator with maximum bandwidth-length product,” Appl. Phys. Lett., vol. 43, p. 998, 1984.
[5] G. E. Betts, and W. S. C. Chang, “Crossing-channel waveguide electrooptic modulators,” IEEE J. Quantum. Electron., vol. 22, p. 1027, 1986.
[6] F. Auracher, “Design tradeoffs for high-speed directional coupler modulators with Δβ-reversal in LiNbO3,” J. Opt. Commun., vol. 5, p. 2, 1984.
[7] M. N. Armenise, ”Fabrication techniques of lithum niobate waveguide”IEEE Proc., vol.135, pp. 85, 1988.
[8] M. Masuda, and J.Koyama, “Effects of a buffer layer on TM modes in a metal-clad optical waveguide using Ti-diffused LiNbO3 C-plate,” Appl. Opt., vol.16, p. 2294, 1977.
[9] A. Yariv and P.Yeh., “Optical Waves in Crystal,” New York : John Wiley and Sons, 1983.
[10] 李俊奇, “雙重擴散式波導管之研究,” 中央大學博士論文, 1994.
[11] L. Tsonev, “Ti:LiNbO3 optical waveguides,” Appl. Phys., vol. 24, pp. 205-209, 1981.
[12] S. Fouchet, A. Carenco, C. Daguet, R. Guglielmi, and L. Riviere, “Wavelength dispersion of Ti induced refraction index change in LiNbO3 as a function of diffusion parameters,” J. Lightwave Tech., vol. 5, p. 700, 1987.
[13] K. Kobota, J. Noda, and O. Mikami, “Traveling wave optical modulator using a directional coupler LiNbO3 waveguide” IEEE J. Quantum. Electron., vol. 16, p. 754, 1980.
[14] K. Atsuki, and E. Yamashita, ”Transmission line aspects of the design of broad-band electrooptic traveling-wave modulators,” J. Lightwave Tech., vol. 5, p. 316, 1987.
[15] R. V. Schmidt, and I. P. Kaminow, ”Metal-diffused optical waveguides in lithium niobate,” Appl. Phys. Lett., vol. 25, p. 458, 1974.
[16] M. N. Armenise, “Fabrication techniques of lithium niobate waveguides,” IEE PROCEEDINGS, vol.135, Pt. J, No.2, APRIL, 1988.
[17] E. Voges, and A. Neyer, “Integrated-Optic devices on LiNbO3 for optical communication,” J. Lightwave Tech., vol.5, p. 1229, 1987.
[18] K. Sreenivas, T. S. Rao, A. Mansingh, and S. Chandra, “Preparation and characterization of RF Sputtered indium tin oxide films,” J. Appl. Phys., vol. 57, p. 384, 1985.
[19] 黃振庭,”緩衝層影響鈮酸鋰光波導元件傳播損耗之研究,” 中央大學碩士論文, 1997.
[20] R. C. Alferness, C. H. Joyner, L. L. Buhl, and S. K. Korotky, “High-speed Traveling-Wave Directional Coupler Switch/Modulator for λ= 1.32μm, ” IEEE J. Quantum. Electron., vol. 19, p.1339, 1983.
[21] H. Nagata, and N. Mitsugi, “Mechanical Reliability of LiNbO3 optical modulators hermetically sealed in stainless steel packages,” Opt. Fiber Technol., vol. 2, p. 216, 1996.
