都市中維生管線眾多，為顧及景觀與街道空間視覺舒適，管線大多埋設於地下。常見地下管線之施工方法分為明挖及非明挖兩大類，近年來為降低施工對地面交通的衝擊，常採用推進之免開挖工法。為增加推進距離，減少中押裝置數量，常在地下推進作業中，灌入滑材以減低推管與土壤間之摩擦，並可避免推力過大導致管材破裂等問題。滑材材料通常為皂土液，有時亦摻入一些特殊混合料或油料。本研究針對推進工程中常用之滑材材料，即皂土及柔軟精，利用直接剪力試驗儀，以重模土壤及模擬管材進行直接剪力試驗及摩擦試驗，探討土壤之剪力強度性質及推管管壁與土壤間之摩擦性質，以推估推管與土壤間經由滑材輔助所減低摩擦力之效益。由實驗結果可知，滑材確可大幅降低推管管壁與土壤間之摩擦角，尤以皂土液最為顯著。此外，本研究考量地中應力之方向性，提出一計算推管推力之簡便公式，藉由此公式之估算，更明確証實加入滑材確可降低推管摩擦力，提高施工效率。

Lots of lifelines are necessary and to be set in urban area. To keep the space and visual comfort of street, these lifelines are usually embedded underground. Two kinds of methods, i.e. open cut and trenchless method, are commonly used in the construction of underground pipelines. Recently, to avoid the impact of street transportation, jack method was used frequently as the trenchless method. Furthermore, to increase the pushing distance of pipe and to decrease the number of middle jack devices, some kinds of lubricating materials are injected onto the interface of pipe and soil. This may also avoid the rupture of pipes due to too large pushing force. Bentonite slurry is commonly used as lubricating material, but sometimes it may be mixed with oil or some other special materials. To investigate the effects of friction reduction of lubricating materials between pipe surface and soil, this research used remolded soil and pipe material and focused on the properties of bentonite and softener which are usually used as lubricating materials in JACK method, and performed a series of direct shear tests and direct friction tests by using direct shear apparatus. From the results of experiments, it is recognized that the lubricating materials can decrease the friction angle between pipe surface and soil apparently, especially for bentonite slurry. Furthermore, this research proposed a convenient formula to estimate the jacking force of pipe by considering the anisotropy of stress in subsoil layer. According to the calculating results with this formula, it is proved definitely that the friction between pipe surface and soil can be decreased apparently by adding lubricating materials.

[1].天佑混凝土工業，水泥產品，
http://www.tianyouh.com.tw/product.html，(2012)。
[2].台灣省住宅及都市發展局贊助辦理，「下水道工程人員研習班
講義集」，國立中央大學環境工程學研究所印行，(1993)。
[3].王志聖，「台中地區卵礫石層中推進與潛盾工法及進度之研究
以中科污水放流管工程為例」，朝陽科技大學營建工程系(2008)。
[4].內政部營建署，「建築技術規則建築構造篇基礎構造設計規
範」，(1989)。
[5].李膺讚，「未飽和崩積土之動靜態力學行為探討」，國立交通
大學土木工程研究所，(1996)。
[6].林傳鐙，「都市下水道施工技術介紹－無開挖地下管施工
法」，臺灣省土木技師公會技師報，226期，第一版，臺灣省
土木技師公會，(2005)。
[7].林書田，陳弘益，李全春，「管冪工法於RC預鑄地下道箱涵推
進工程之應用」，現代營建357期，(2009)。
[8].粉圓水泥製品廠股份有限公司，產品型錄，(2012)。
[9].倪至寬，衛生下水道施工與標準作業程序(上)，詹氏書局，
(2003)。
[10].張惠文，「黏土中不同材質基樁之摩擦行為」，行政院國科科
學委員會專題研究計畫成果報告，NSC.81-0410-E008-13，(1992)。
[11].張惠文，廖新興，陳國隆，「黏性土壤與鋼材間之摩擦特
性」，中華民國第十屆全國力學會議，PP.841-850，(1990)。
[12].統偉貿易股份有限公司，「地下管推進工法Bentonil納皂土超
泥漿高分子聚合物捷固長距離二液型固結滑材」，(2012)。
[13].勝揚營造有限公司，「淡海新市鎮第一期發展區污水下水道系
統修繕工程第一標」，施工計畫書，第57頁，(2008)。
[14].蔡熙昀，「由直剪試驗結果分析場鑄樁荷重行為」，碩士論文，國立臺灣工業技術學院營建工程技術研究所，（1994）。
[15].蔣緯鳴，「下水道短管推進力分析」，碩士論文，國立中央大
學土木工程學系，（2006）。
[16].Brumund, W.F., and Leonards, G.A., Discussion of “Influential factors of friction between Steel and Dry sands,” Soils and Foundations, Vol. 27, No. 2, pp. 66-68 (1987).
[17].Burland, J.F., “Shaft friction of piles in clay,”
Ground Engineering, Vol. 6, No. 3, pp. 30-42 (1973).
[18].Das, B.M., “Principles of Geotechnical Engineering, ” seventh Edition, pp. 247-248 (2010).
[19].Flaate, K., and Selnes, P., “Side friction of piles
in clay,” Proceedings of the Ninth []International Conference on Soil Mechanics and Foundation Engineering., Tokyo, pp. 517-522 (1977).
[20].Kishida, H. and Uesugi, M.,“Tests of the Interface
between Sand and steel in the Simple Shear Apparatus, ”Geotechnique, Vol. 37, No.1, pp. 45-52 (1987).
[21].Kraft, L.M., Focht, J.A., and Amerasinghe, S.F.,“Friction capacity of piles driven into clay,” Journal. of Geotechnique. Engineering. ASCE, Vol. 107, No.11, pp. 1521-1541 (1981).
[22].Lambe, T.W., and Whiteman, R.V., Soil Mechanics, John
Wiley ＆ Sons,Inc., New York, pp. 162-167 (1969).
[23].Meyerhof, G.G., “Bearing capacity and settlement of
pile foundations, ”ASCE, Vol. 102, GT3, pp. 197-228 (1976).
[24].Mochtar, I.B., and Edil, T.B. “Shaft resistance of model pile in clay” Jour. of, Geotechnical Engineering, ASCE, Vol. 114, No.11, pp. 1227-1244 (1988).
[25].Parry, R. H. G., and Swain, C.W., “Effective stress
method of calculating skin friction on driven piles in soft clay,” Ground Engineering, Vol. 4, pp. 24- 26 (1977).
[26].Pellet-Beaucour A.L. and Kastner R., “Experimental
and analytical study of friction forces during microtunneling operations,”Tunneling and Underground
Space Technology, Vol. 17, pp. 83-97 (2002).
[27].Potyondy, J.G.,” Skin friction between steel and dry
sands and construction Materials,”Geotechnique,Vol. 11, pp. 339-353 (1961).