類鑽膜為鑽石結構sp3鍵結與石墨結構sp2鍵結的非晶(Amorphous)碳膜，具有絕佳的機械性質可做為保護膜。但因內應力過大與穿透率不佳，使其在應用上受到侷限。而類鑽膜的摻雜改善了上述缺點，使類鑽膜更利於被使用。
常見的類鑽膜製程為電漿輔助化學氣相沉積法(PECVD)，而本實驗與一般的PECVD架構不同，稱此系統為射頻磁控電漿輔助化學氣相沉積法，可獨立控制電漿功率與負偏壓大小。在此實驗中，利用Raman和FTIR量測分析與驗證類鑽薄膜特性，再利用XPS輔助佐證實驗結果。甲烷與六甲基二矽氧烷作為反應氣體，利用射頻磁控電漿輔助化學氣相沉積法摻雜SiOx於類鑽膜，透過改變六甲基二矽氧烷的流量控制矽氧化合物在膜中的含量，特別是透過SiOx的摻雜。實驗以負偏壓大小為200 V，電漿功率為140 W，HMDSO流量為0.2 sccm下，所鍍製出的類鑽薄膜具有88 %的穿透率，硬度值達12.9 Gpa，其厚度約100 nm。

Diamond like carbon (DLC) films which was consisted of sp3 diamond bonding and sp2 graphite is an amorphous carbon films. It has excellent mechanical property and was used as protective coating. DLC films have high intrinsic compressive stress and low transparency, so it limits its application. Doping of DLC films improved its disadvantage, so it can be used widely.
The common process is plasma enhanced chemical vapor deposition (PECVD), but there are some differences in our setup. This setup was called radio frequency magnetron plasma enhanced chemical vapor deposition. It can control plasma power and DC bias independently. We use Raman and FTIR spectrometer to analyze and prove properties of diamond like carbon films in the experiment. XPS measurement assists in evidencing experiment result. DLC films with an addition of SiOx were deposited in radio frequency magnetron plasma enhanced chemical vapor deposition from a mixture of methane and hexamethyldisiloxane (HMDSO). The flow rate of HMDSO was changed in order to vary the SiOx content in the films, particularly doping SiOx in DLC films. 200 V negative self bias, 100 W RF power and 0.2 sccm HMDSO were applied to deposit DLC films with transparency up to 88 % and hardness up to 12.9 Gpa. The thickness of films is about 100 nm.

[1] S. Aisenberg and R. Chabot, "Ion‐Beam Deposition of Thin Films of Diamondlike Carbon," Journal of Applied Physics, vol. 42, pp. 2953-2958, 1971.
[2] 余樹貞, 晶體之結構與性質. 台北台灣: 渤海堂文化公司, 1993.
[3] W. D. Kingery, H. K. Bowen, D. R. Uhlmann, and R. Frieser, "Introduction to Ceramics," Journal of The Electrochemical Society, vol. 124, p. 152C, March 1, 1977 1977.
[4] C. Z. Wang and K. M. Ho, "Structure, dynamics, and electronic properties of diamondlike amorphous carbon," Physical Review Letters, vol. 71, pp. 1184-1187, 1993.
[5] A. Grill, "Plasma-deposited diamondlike carbon and related materials," IBM Journal of Research and Development, vol. 43, pp. 147-162, 1999.
[6] X.-z. Ding, F.-m. Zhang, X.-H. Liu, P. W. Wang, W. G. Durrer, W. Y. Cheung, et al., "Ion beam assisted deposition of diamond-like nanocomposite films in an acetylene atmosphere," Thin Solid Films, vol. 346, pp. 82-85, 1999.
[7] A. Singh and P. Lavigne, "Deposition of diamond-like carbon films by low energy ion beam and d.c. magnetron sputtering," Surface and Coatings Technology, vol. 47, pp. 188-200, 1991.
[8] S. Flege, R. Hatada, W. Ensinger, and K. Baba, "Properties of hydrogenated DLC films as prepared by a combined method of plasma source ion implantation and unbalanced magnetron sputtering," Journal of Materials Research, vol. 27, pp. 845-849, 2011.
[9] A. A. Voevodin and M. S. Donley, "Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review," Surface and Coatings Technology, vol. 82, pp. 199-213, 1996.
[10] H.-F. Cheng, F.-Y. Chuang, C.-Y. Sun, C.-T. Tseng, and I. N. Lin, "Effect of boron-doping on electron field emission behavior of pulsed-laser deposited diamond-like-carbon films," Diamond and Related Materials, vol. 7, pp. 711-716, 1998.
[11] P. J. Fallon, V. S. Veerasamy, C. A. Davis, J. Robertson, G. A. J. Amaratunga, W. I. Milne, et al., "Properties of filtered-ion-beam-deposited diamondlike carbon as a function of ion energy," Physical Review B, vol. 48, pp. 4777-4782, 1993.
[12] D. R. McKenzie, "Tetrahedral bonding in amorphous carbon," Reports on Progress in Physics, vol. 59, pp. 1611-1664, 1996.
[13] T. Michler, M. Grischke, I. Traus, K. Bewilogua, and H. Dimigen, "Mechanical properties of DLC films prepared by bipolar pulsed DC PACVD," Diamond and Related Materials, vol. 7, pp. 1333-1337, 1998.
[14] N. Kumar, S. A. Barve, S. S. Chopade, R. Kar, N. Chand, S. Dash, et al., "Scratch resistance and tribological properties of SiOx incorporated diamond-like carbon films deposited by r.f. plasma assisted chemical vapor deposition," Tribology International, vol. 84, pp. 124-131, 2015.
[15] P. Koidl, C. Wild, B. Dischler, J. Wagner, and M. Ramsteiner, "Plasma Deposition, Properties and Structure of Amorphous Hydrogenated Carbon Films," Materials Science Forum, vol. 52-53, pp. 41-70, 1990.
[16] A. Vanhulsel, J. P. Celis, E. Dekempeneer, J. Meneve, J. Smeets, and K. Vercammen, "Inductively coupled r.f. plasma assisted chemical vapour deposition of diamond-like carbon coatings," Diamond and Related Materials, vol. 8, pp. 1193-1197, 1999.
[17] L. Zajikova, "Correlation between SiOx content and properties of DLC:SiOx films prepared by PECVD," Surface and Coatings Technology, vol. 174-175, pp. 281-285, 2003.
[18] N. Dwivedi, S. Kumar, and H. K. Malik, "Strange hardness characteristic of hydrogenated diamond-like carbon thin film by plasma enhanced chemical vapor deposition process," Applied Physics Letters, vol. 102, p. 011917, 2013.
[19] A. Bendavid, P. J. Martin, L. Randeniya, and M. S. Amin, "The properties of fluorine containing diamond-like carbon films prepared by plasma-enhanced chemical vapour deposition," Diamond and Related Materials, vol. 18, pp. 66-71, 2009.
[20] F. Zhao, H. Li, L. Ji, Y. Wang, H. Zhou, and J. Chen, "Ti-DLC films with superior friction performance," Diamond and Related Materials, vol. 19, pp. 342-349, 2010.
[21] N. Dwivedi and S. Kumar, "Nanoindentation testing on copper/diamond-like carbon bi-layer films," Current Applied Physics, vol. 12, pp. 247-253, 2012.
[22] S. F. Ahmed, M.-W. Moon, and K.-R. Lee, "Effect of silver doping on optical property of diamond like carbon films," Thin Solid Films, vol. 517, pp. 4035-4038, 2009.
[23] L.-Y. Chen and F. Chau-Nan Hong, "Effects of SiOx-incorporation hydrocarbons on the tibological properties of DLC films," Diamond and Related Materials, vol. 10, pp. 1058-1062, 2001.
[24] T. S. Santra, C. H. Liu, T. K. Bhattacharyya, P. Patel, and T. K. Barik, "Characterization of diamond-like nanocomposite thin films grown by plasma enhanced chemical vapor deposition," Journal of Applied Physics, vol. 107, p. 124320, 2010.
[25] T. S. Santra, T. K. Bhattacharyya, P. Patel, F. G. Tseng, and T. K. Barik, "Structural and tribological properties of diamond-like nanocomposite thin films," Surface and Coatings Technology, vol. 206, pp. 228-233, 2011.
[26] 混成軌域. Available: http://highscope.ch.ntu.edu.tw/wordpress/?p=9282

[27] C. Casiraghi, A. C. Ferrari, and J. Robertson, "Raman spectroscopy of hydrogenated amorphous carbons," Physical Review B, vol. 72, 2005.
[28] H. S. Nalwa, Handbook of thin film materials: Academic Press, 2002.
[29] Y. Lifshitz, S. R. Kasi, and J. W. Rabalais, "Subplantation model for film growth from hyperthermal species: Application to diamond," Physical Review Letters, vol. 62, pp. 1290-1293, 1989.
[30] 真空技術與應用. 台北台灣: 財團法人國家實驗研究院儀器科技研究中心, 2001.
[31] 魏敬倫, "以反應性射頻磁控濺鍍搭配HMDSO電漿聚合鍍製氧化矽摻碳薄膜阻障層之研究," 光電科學與工程學系, 國立中央大學, 桃園台灣, 2012.
[32] 鄭敬龍, "以電漿聚合鍍製氧化矽摻碳氫薄膜應力之研究," 光電科學與工程學系, 國立中央大學, 桃園台灣, 2015.
[33] 張瑞慶, "奈米壓痕技術與應用," ed: 聖約翰科技大學, 2006.
[34] 丁志華, 管正平, 黃新言, and 戴寶通, "奈米壓痕量測系統簡介," 奈米通訊 (NDL), vol. 9, pp. 4-10, 2002.
[35] Raman spectroscopy. Available: https://en.wikipedia.org/wiki/Raman_spectroscopy
[36] A. C. Ferrari, "Determination of bonding in diamond-like carbon by Raman spectroscopy," Diamond and Related Materials, vol. 11, pp. 1053-1061, 2002.
[37] A. C. Ferrari and J. Robertson, "Interpretation of Raman spectra of disordered and amorphous carbon," Physical review B, vol. 61, p. 14095, 2000.
[38] 朱柏豪, "表面輪廓儀的用途," 奈米通訊 (NDL), vol. 22, pp. 31-33.
[39] X-ray photoelectron sectroscopy. Available: https://en.wikipedia.org/wiki/X-ray_photoelectron_spectroscopy
[40] D. H. Lee, X. M. He, K. C. Walter, M. Nastasi, J. R. Tesmer, M. Tuszewski, et al., "Diamondlike carbon deposition on silicon using radio-frequency inductive plasma of Ar and C[sub 2]H[sub 2] gas mixture in plasma immersion ion deposition," Applied Physics Letters, vol. 73, p. 2423, 1998.
[41] K. H. Schoenbach, A. El-Habachi, W. Shi, and M. Ciocca, "High-pressure hollow cathode discharges," Plasma Sources Science and Technology, vol. 6, p. 468, 1997.
[42] Y. Lifshitz, "Pitfalls in amorphous carbon studies," Diamond and Related Materials, vol. 12, pp. 130-140, 2003.