| 研究生: |
洪嘉良 Jia-liang Hong |
|---|---|
| 論文名稱: |
利用線性零組件建構2-D半導體元件模擬及應用 Analysis and Simulation of 2-D Semiconductor Device by Linear Components |
| 指導教授: |
蔡曜聰
Yao-Tsung Tsai |
| 口試委員: | |
| 學位類別: |
碩士 Master |
| 系所名稱: |
資訊電機學院 - 電機工程學系 Department of Electrical Engineering |
| 畢業學年度: | 98 |
| 語文別: | 中文 |
| 論文頁數: | 49 |
| 中文關鍵詞: | 線性零組件 |
| 相關次數: | 點閱:5 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
在這篇論文中,我們利用基本的線性零組件,來完成非線性元件的模擬,我們使用的基本線性包含零組件電壓源、電容以及電壓控制電流源。我們更進一步將元件內部參數,置於主程式中,便於使用者辨識及做調整。為了用線性零組件進行2-D元件的模擬,我們利用線性電壓控制電流源這個線性零組件,再利用牛頓-拉夫森法將運算得到的電流以及轉導,置入矩陣ADV = B,經由牛頓-拉夫森法可以求解到DV ,這個未知向量,利用此觀念,逐步取代二維模擬器(2D mixed-level simulator)中使用之非線性特殊零組件,在牛頓拉夫森建立公式ADV = B中,A矩陣含微分項,微分項可用解析解或數值解來得到,我們分別運用解析解及數值解完成二維元件模擬,並進行解析解與數值解結果驗證與時間比較。
In this thesis, the basic linear components, which consist of voltage source, capacitor, and voltage-control current source, are employed to simulate the non-linear devices. The circuit parameters are explicitly defined at the main program for easier recognition and adjustment.To simulate 2-D semiconductor devices by linear elements, the nonlinear Poisson equation and the nonlinear carrier continuity equations are replaced by the linear voltage-controlled current source in the environment of the Newton-Raphson iteration. The matrix A in ADV = B include partial differentiation items which are obtained by both numerical differentiation and analytical differentiation in this thesis. The simulation results show a good accuracy
between two methods.
[1] S. S. Kuo, “Computer applications of numerical
methods” Additions-Wesley Pub.Co.1972.
[2] D. M. Bressoud, “Appendix to A Radical Approcch to
Real Analysis,” 2nd edition,2006.
[3] Robert L. Boylestad, Louis Nashelsky, “Electronic
Devices and Circuit Theory,”Chapter 2,Prentice Hall,
9 edition, 2005.
[4] HU Xiao-pen, ZHANG Bo “Dynamic Solution and
Simulation with the WaveletCollocation Method for
Differential Equation Series of the Linear Circuits”
JOURNAL of CIRUITS AND SYSTEMS Vol.9 No.3 June, 2004.
[5] Donald A Neamen “Semiconductor Physics & Devices”,
Chapter 8, McGraw-Hill, 2nd edition, 2003.
[6] M. Shur, “ Introduction to Electronic Devices,”
Chapter 3, John Wiley & SonsInc.,1996.
[7] David M. Bressoud, Appendix to Radical Approach to
Real Analysis 2nd edition,pp.282,2006.
[8] Gordon E. Moore, “Cramming more components onto
integrated circuits,” Electronics,Volume 38, Number
8, April 19, 1965.
[9] Press, W. H.; Flannery, B. P.; Teukolsky, S. A.; and
Vetterling, W. T. "Numerical Derivatives." §5.7 in
Numerical Recipes in FORTRAN: The Art of Scientific
Computing, 2nd ed. Cambridge, England: Cambridge
University Press, pp. 180-184, 1992.
[10] G. Bianchi, “Performance Analysis of the IEEE 802.11
Distributed Coordination Function”, IEEE Journal on
Selected Areas in Communications, vol. 18, no. 3, pp.
535-547, 2000.